工程文件上库

WZYX_UART_V1.1250726.X/WZYX_UART_V1.1250726.X/Makefile

@@ -0,0 +1,113 @@
+#
+#  There exist several targets which are by default empty and which can be 
+#  used for execution of your targets. These targets are usually executed 
+#  before and after some main targets. They are: 
+#
+#     .build-pre:              called before 'build' target
+#     .build-post:             called after 'build' target
+#     .clean-pre:              called before 'clean' target
+#     .clean-post:             called after 'clean' target
+#     .clobber-pre:            called before 'clobber' target
+#     .clobber-post:           called after 'clobber' target
+#     .all-pre:                called before 'all' target
+#     .all-post:               called after 'all' target
+#     .help-pre:               called before 'help' target
+#     .help-post:              called after 'help' target
+#
+#  Targets beginning with '.' are not intended to be called on their own.
+#
+#  Main targets can be executed directly, and they are:
+#  
+#     build                    build a specific configuration
+#     clean                    remove built files from a configuration
+#     clobber                  remove all built files
+#     all                      build all configurations
+#     help                     print help mesage
+#  
+#  Targets .build-impl, .clean-impl, .clobber-impl, .all-impl, and
+#  .help-impl are implemented in nbproject/makefile-impl.mk.
+#
+#  Available make variables:
+#
+#     CND_BASEDIR                base directory for relative paths
+#     CND_DISTDIR                default top distribution directory (build artifacts)
+#     CND_BUILDDIR               default top build directory (object files, ...)
+#     CONF                       name of current configuration
+#     CND_ARTIFACT_DIR_${CONF}   directory of build artifact (current configuration)
+#     CND_ARTIFACT_NAME_${CONF}  name of build artifact (current configuration)
+#     CND_ARTIFACT_PATH_${CONF}  path to build artifact (current configuration)
+#     CND_PACKAGE_DIR_${CONF}    directory of package (current configuration)
+#     CND_PACKAGE_NAME_${CONF}   name of package (current configuration)
+#     CND_PACKAGE_PATH_${CONF}   path to package (current configuration)
+#
+# NOCDDL
+
+
+# Environment 
+MKDIR=mkdir
+CP=cp
+CCADMIN=CCadmin
+RANLIB=ranlib
+
+
+# build
+build: .build-post
+
+.build-pre:
+# Add your pre 'build' code here...
+
+.build-post: .build-impl
+# Add your post 'build' code here...
+
+
+# clean
+clean: .clean-post
+
+.clean-pre:
+# Add your pre 'clean' code here...
+# WARNING: the IDE does not call this target since it takes a long time to
+# simply run make. Instead, the IDE removes the configuration directories
+# under build and dist directly without calling make.
+# This target is left here so people can do a clean when running a clean
+# outside the IDE.
+
+.clean-post: .clean-impl
+# Add your post 'clean' code here...
+
+
+# clobber
+clobber: .clobber-post
+
+.clobber-pre:
+# Add your pre 'clobber' code here...
+
+.clobber-post: .clobber-impl
+# Add your post 'clobber' code here...
+
+
+# all
+all: .all-post
+
+.all-pre:
+# Add your pre 'all' code here...
+
+.all-post: .all-impl
+# Add your post 'all' code here...
+
+
+# help
+help: .help-post
+
+.help-pre:
+# Add your pre 'help' code here...
+
+.help-post: .help-impl
+# Add your post 'help' code here...
+
+
+
+# include project implementation makefile
+include nbproject/Makefile-impl.mk
+
+# include project make variables
+include nbproject/Makefile-variables.mk

WZYX_UART_V1.1250726.X/WZYX_UART_V1.1250726.X/main.c

@@ -218,12 +218,12 @@ void __attribute__((interrupt, auto_psv)) _T1Interrupt(void) {
 	}
 	if((baseSys_st & ~SYS_ST_OK) == 0)
 	{
-		if(ledtimer == NORMALFLASH){
+		if(ledtimer >= NORMALFLASH){
 			ledtimer = 0;
 			STU = !STU; 
 		}
 	}else{
-		if(ledtimer == NORMAL_X2_FLASH*4){
+		if(ledtimer >= NORMAL_X2_FLASH*4){
 	        ledtimer = 0;
 			blinkTime = 0;
 		}

WZYX_UART_V1.1250726.X/WZYX_UART_V1.1250726.X/nbproject/Makefile-default.mk

@@ -0,0 +1,189 @@
+#
+# Generated Makefile - do not edit!
+#
+# Edit the Makefile in the project folder instead (../Makefile). Each target
+# has a -pre and a -post target defined where you can add customized code.
+#
+# This makefile implements configuration specific macros and targets.
+
+
+# Include project Makefile
+ifeq "${IGNORE_LOCAL}" "TRUE"
+# do not include local makefile. User is passing all local related variables already
+else
+include Makefile
+# Include makefile containing local settings
+ifeq "$(wildcard nbproject/Makefile-local-default.mk)" "nbproject/Makefile-local-default.mk"
+include nbproject/Makefile-local-default.mk
+endif
+endif
+
+# Environment
+MKDIR=gnumkdir -p
+RM=rm -f 
+MV=mv 
+CP=cp 
+
+# Macros
+CND_CONF=default
+ifeq ($(TYPE_IMAGE), DEBUG_RUN)
+IMAGE_TYPE=debug
+OUTPUT_SUFFIX=elf
+DEBUGGABLE_SUFFIX=elf
+FINAL_IMAGE=${DISTDIR}/WZYX_UART_V1.1250726.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}
+else
+IMAGE_TYPE=production
+OUTPUT_SUFFIX=hex
+DEBUGGABLE_SUFFIX=elf
+FINAL_IMAGE=${DISTDIR}/WZYX_UART_V1.1250726.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}
+endif
+
+ifeq ($(COMPARE_BUILD), true)
+COMPARISON_BUILD=-mafrlcsj
+else
+COMPARISON_BUILD=
+endif
+
+# Object Directory
+OBJECTDIR=build/${CND_CONF}/${IMAGE_TYPE}
+
+# Distribution Directory
+DISTDIR=dist/${CND_CONF}/${IMAGE_TYPE}
+
+# Source Files Quoted if spaced
+SOURCEFILES_QUOTED_IF_SPACED=main.c Delay.c Pin.c Uart.c
+
+# Object Files Quoted if spaced
+OBJECTFILES_QUOTED_IF_SPACED=${OBJECTDIR}/main.o ${OBJECTDIR}/Delay.o ${OBJECTDIR}/Pin.o ${OBJECTDIR}/Uart.o
+POSSIBLE_DEPFILES=${OBJECTDIR}/main.o.d ${OBJECTDIR}/Delay.o.d ${OBJECTDIR}/Pin.o.d ${OBJECTDIR}/Uart.o.d
+
+# Object Files
+OBJECTFILES=${OBJECTDIR}/main.o ${OBJECTDIR}/Delay.o ${OBJECTDIR}/Pin.o ${OBJECTDIR}/Uart.o
+
+# Source Files
+SOURCEFILES=main.c Delay.c Pin.c Uart.c
+
+
+
+CFLAGS=
+ASFLAGS=
+LDLIBSOPTIONS=
+
+############# Tool locations ##########################################
+# If you copy a project from one host to another, the path where the  #
+# compiler is installed may be different.                             #
+# If you open this project with MPLAB X in the new host, this         #
+# makefile will be regenerated and the paths will be corrected.       #
+#######################################################################
+# fixDeps replaces a bunch of sed/cat/printf statements that slow down the build
+FIXDEPS=fixDeps
+
+.build-conf:  ${BUILD_SUBPROJECTS}
+ifneq ($(INFORMATION_MESSAGE), )
+	@echo $(INFORMATION_MESSAGE)
+endif
+	${MAKE}  -f nbproject/Makefile-default.mk ${DISTDIR}/WZYX_UART_V1.1250726.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}
+
+MP_PROCESSOR_OPTION=24FJ512GU410
+MP_LINKER_FILE_OPTION=,--script=p24FJ512GU410.gld
+# ------------------------------------------------------------------------------------
+# Rules for buildStep: compile
+ifeq ($(TYPE_IMAGE), DEBUG_RUN)
+${OBJECTDIR}/main.o: main.c  .generated_files/flags/default/7e31da91e93f372a6a336ff10ac41bc3bdfa8577 .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
+	@${MKDIR} "${OBJECTDIR}" 
+	@${RM} ${OBJECTDIR}/main.o.d 
+	@${RM} ${OBJECTDIR}/main.o 
+	${MP_CC} $(MP_EXTRA_CC_PRE)  main.c  -o ${OBJECTDIR}/main.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/main.o.d"      -g -D__DEBUG -D__MPLAB_DEBUGGER_PK3=1  -mno-eds-warn  -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off    -mdfp="${DFP_DIR}/xc16"
+	
+${OBJECTDIR}/Delay.o: Delay.c  .generated_files/flags/default/32e148f52a230d6a2aa3c1186da3c3ad7ba8af36 .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
+	@${MKDIR} "${OBJECTDIR}" 
+	@${RM} ${OBJECTDIR}/Delay.o.d 
+	@${RM} ${OBJECTDIR}/Delay.o 
+	${MP_CC} $(MP_EXTRA_CC_PRE)  Delay.c  -o ${OBJECTDIR}/Delay.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/Delay.o.d"      -g -D__DEBUG -D__MPLAB_DEBUGGER_PK3=1  -mno-eds-warn  -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off    -mdfp="${DFP_DIR}/xc16"
+	
+${OBJECTDIR}/Pin.o: Pin.c  .generated_files/flags/default/c8247b692646e347f1e66a38cf91671ecc232e0b .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
+	@${MKDIR} "${OBJECTDIR}" 
+	@${RM} ${OBJECTDIR}/Pin.o.d 
+	@${RM} ${OBJECTDIR}/Pin.o 
+	${MP_CC} $(MP_EXTRA_CC_PRE)  Pin.c  -o ${OBJECTDIR}/Pin.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/Pin.o.d"      -g -D__DEBUG -D__MPLAB_DEBUGGER_PK3=1  -mno-eds-warn  -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off    -mdfp="${DFP_DIR}/xc16"
+	
+${OBJECTDIR}/Uart.o: Uart.c  .generated_files/flags/default/96cc1f6bf2af8dffa09e9b45fa168e30004c70cb .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
+	@${MKDIR} "${OBJECTDIR}" 
+	@${RM} ${OBJECTDIR}/Uart.o.d 
+	@${RM} ${OBJECTDIR}/Uart.o 
+	${MP_CC} $(MP_EXTRA_CC_PRE)  Uart.c  -o ${OBJECTDIR}/Uart.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/Uart.o.d"      -g -D__DEBUG -D__MPLAB_DEBUGGER_PK3=1  -mno-eds-warn  -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off    -mdfp="${DFP_DIR}/xc16"
+	
+else
+${OBJECTDIR}/main.o: main.c  .generated_files/flags/default/22e0767ba333a50f3a4c9b485ae2bb3d39fc340f .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
+	@${MKDIR} "${OBJECTDIR}" 
+	@${RM} ${OBJECTDIR}/main.o.d 
+	@${RM} ${OBJECTDIR}/main.o 
+	${MP_CC} $(MP_EXTRA_CC_PRE)  main.c  -o ${OBJECTDIR}/main.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/main.o.d"      -mno-eds-warn  -g -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off    -mdfp="${DFP_DIR}/xc16"
+	
+${OBJECTDIR}/Delay.o: Delay.c  .generated_files/flags/default/bc1fcc2f658a99ee8463a80e78bf74dad59795b6 .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
+	@${MKDIR} "${OBJECTDIR}" 
+	@${RM} ${OBJECTDIR}/Delay.o.d 
+	@${RM} ${OBJECTDIR}/Delay.o 
+	${MP_CC} $(MP_EXTRA_CC_PRE)  Delay.c  -o ${OBJECTDIR}/Delay.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/Delay.o.d"      -mno-eds-warn  -g -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off    -mdfp="${DFP_DIR}/xc16"
+	
+${OBJECTDIR}/Pin.o: Pin.c  .generated_files/flags/default/c6825f685ad1b38bc3ffae98478ae3f11670fb87 .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
+	@${MKDIR} "${OBJECTDIR}" 
+	@${RM} ${OBJECTDIR}/Pin.o.d 
+	@${RM} ${OBJECTDIR}/Pin.o 
+	${MP_CC} $(MP_EXTRA_CC_PRE)  Pin.c  -o ${OBJECTDIR}/Pin.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/Pin.o.d"      -mno-eds-warn  -g -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off    -mdfp="${DFP_DIR}/xc16"
+	
+${OBJECTDIR}/Uart.o: Uart.c  .generated_files/flags/default/934e95c2ae50554c4a605b4f0ddab781ff640b28 .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
+	@${MKDIR} "${OBJECTDIR}" 
+	@${RM} ${OBJECTDIR}/Uart.o.d 
+	@${RM} ${OBJECTDIR}/Uart.o 
+	${MP_CC} $(MP_EXTRA_CC_PRE)  Uart.c  -o ${OBJECTDIR}/Uart.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/Uart.o.d"      -mno-eds-warn  -g -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off    -mdfp="${DFP_DIR}/xc16"
+	
+endif
+
+# ------------------------------------------------------------------------------------
+# Rules for buildStep: assemble
+ifeq ($(TYPE_IMAGE), DEBUG_RUN)
+else
+endif
+
+# ------------------------------------------------------------------------------------
+# Rules for buildStep: assemblePreproc
+ifeq ($(TYPE_IMAGE), DEBUG_RUN)
+else
+endif
+
+# ------------------------------------------------------------------------------------
+# Rules for buildStep: link
+ifeq ($(TYPE_IMAGE), DEBUG_RUN)
+${DISTDIR}/WZYX_UART_V1.1250726.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}: ${OBJECTFILES}  nbproject/Makefile-${CND_CONF}.mk    
+	@${MKDIR} ${DISTDIR} 
+	${MP_CC} $(MP_EXTRA_LD_PRE)  -o ${DISTDIR}/WZYX_UART_V1.1250726.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}  ${OBJECTFILES_QUOTED_IF_SPACED}      -mcpu=$(MP_PROCESSOR_OPTION)        -D__DEBUG=__DEBUG -D__MPLAB_DEBUGGER_PK3=1  -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)   -mreserve=data@0x800:0x81B -mreserve=data@0x81C:0x81D -mreserve=data@0x81E:0x81F -mreserve=data@0x820:0x821 -mreserve=data@0x822:0x823 -mreserve=data@0x824:0x827 -mreserve=data@0x82A:0x84F   -Wl,--local-stack,,--defsym=__MPLAB_BUILD=1,--defsym=__MPLAB_DEBUG=1,--defsym=__DEBUG=1,-D__DEBUG=__DEBUG,--defsym=__MPLAB_DEBUGGER_PK3=1,$(MP_LINKER_FILE_OPTION),--stack=16,--check-sections,--data-init,--pack-data,--handles,--isr,--no-gc-sections,--fill-upper=0,--stackguard=16,--no-force-link,--smart-io,-Map="${DISTDIR}/${PROJECTNAME}.${IMAGE_TYPE}.map",--report-mem,--memorysummary,${DISTDIR}/memoryfile.xml$(MP_EXTRA_LD_POST)  -mdfp="${DFP_DIR}/xc16" 
+	
+else
+${DISTDIR}/WZYX_UART_V1.1250726.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}: ${OBJECTFILES}  nbproject/Makefile-${CND_CONF}.mk   
+	@${MKDIR} ${DISTDIR} 
+	${MP_CC} $(MP_EXTRA_LD_PRE)  -o ${DISTDIR}/WZYX_UART_V1.1250726.X.${IMAGE_TYPE}.${DEBUGGABLE_SUFFIX}  ${OBJECTFILES_QUOTED_IF_SPACED}      -mcpu=$(MP_PROCESSOR_OPTION)        -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -Wl,--local-stack,,--defsym=__MPLAB_BUILD=1,$(MP_LINKER_FILE_OPTION),--stack=16,--check-sections,--data-init,--pack-data,--handles,--isr,--no-gc-sections,--fill-upper=0,--stackguard=16,--no-force-link,--smart-io,-Map="${DISTDIR}/${PROJECTNAME}.${IMAGE_TYPE}.map",--report-mem,--memorysummary,${DISTDIR}/memoryfile.xml$(MP_EXTRA_LD_POST)  -mdfp="${DFP_DIR}/xc16" 
+	${MP_CC_DIR}\\xc16-bin2hex ${DISTDIR}/WZYX_UART_V1.1250726.X.${IMAGE_TYPE}.${DEBUGGABLE_SUFFIX} -a  -omf=elf   -mdfp="${DFP_DIR}/xc16" 
+	
+endif
+
+
+# Subprojects
+.build-subprojects:
+
+
+# Subprojects
+.clean-subprojects:
+
+# Clean Targets
+.clean-conf: ${CLEAN_SUBPROJECTS}
+	${RM} -r ${OBJECTDIR}
+	${RM} -r ${DISTDIR}
+
+# Enable dependency checking
+.dep.inc: .depcheck-impl
+
+DEPFILES=$(wildcard ${POSSIBLE_DEPFILES})
+ifneq (${DEPFILES},)
+include ${DEPFILES}
+endif

WZYX_UART_V1.1250726.X/WZYX_UART_V1.1250726.X/nbproject/Makefile-genesis.properties

@@ -0,0 +1,13 @@
+#
+#Wed Feb 04 17:28:10 CST 2026
+default.languagetoolchain.version=2.10
+default.Pack.dfplocation=D\:\\Program Files\\Microchip\\MPLABX\\v6.15\\packs\\Microchip\\PIC24F-GL-GU_DFP\\1.5.121
+conf.ids=default
+default.languagetoolchain.dir=D\:\\Program Files\\Microchip\\xc16\\v2.10\\bin
+host.id=1707-dsfu-bg
+configurations-xml=6a50956c52202d9917a8df43e0f73c15
+default.com-microchip-mplab-mdbcore-PICKit3Tool-PICkit3DbgToolManager.md5=50072f33d27b72924000ca2dca4b7622
+com-microchip-mplab-nbide-embedded-makeproject-MakeProject.md5=e62346c0c0ecee2637e613b49cb7b7fa
+proj.dir=F\:\\library\\source\\WZYX_UART_V1.1250726.X\\WZYX_UART_V1.1250726.X
+host.platform=windows
+default.com-microchip-mplab-nbide-toolchain-xc16-XC16LanguageToolchain.md5=07f7da95e66d00aa4668de5175f752c5

WZYX_UART_V1.1250726.X/WZYX_UART_V1.1250726.X/nbproject/Makefile-impl.mk

@@ -0,0 +1,69 @@
+#
+# Generated Makefile - do not edit!
+#
+# Edit the Makefile in the project folder instead (../Makefile). Each target
+# has a pre- and a post- target defined where you can add customization code.
+#
+# This makefile implements macros and targets common to all configurations.
+#
+# NOCDDL
+
+
+# Building and Cleaning subprojects are done by default, but can be controlled with the SUB
+# macro. If SUB=no, subprojects will not be built or cleaned. The following macro
+# statements set BUILD_SUB-CONF and CLEAN_SUB-CONF to .build-reqprojects-conf
+# and .clean-reqprojects-conf unless SUB has the value 'no'
+SUB_no=NO
+SUBPROJECTS=${SUB_${SUB}}
+BUILD_SUBPROJECTS_=.build-subprojects
+BUILD_SUBPROJECTS_NO=
+BUILD_SUBPROJECTS=${BUILD_SUBPROJECTS_${SUBPROJECTS}}
+CLEAN_SUBPROJECTS_=.clean-subprojects
+CLEAN_SUBPROJECTS_NO=
+CLEAN_SUBPROJECTS=${CLEAN_SUBPROJECTS_${SUBPROJECTS}}
+
+
+# Project Name
+PROJECTNAME=WZYX_UART_V1.1250726.X
+
+# Active Configuration
+DEFAULTCONF=default
+CONF=${DEFAULTCONF}
+
+# All Configurations
+ALLCONFS=default 
+
+
+# build
+.build-impl: .build-pre
+	${MAKE} -f nbproject/Makefile-${CONF}.mk SUBPROJECTS=${SUBPROJECTS} .build-conf
+
+
+# clean
+.clean-impl: .clean-pre
+	${MAKE} -f nbproject/Makefile-${CONF}.mk SUBPROJECTS=${SUBPROJECTS} .clean-conf
+
+# clobber
+.clobber-impl: .clobber-pre .depcheck-impl
+	    ${MAKE} SUBPROJECTS=${SUBPROJECTS} CONF=default clean
+
+
+
+# all
+.all-impl: .all-pre .depcheck-impl
+	    ${MAKE} SUBPROJECTS=${SUBPROJECTS} CONF=default build
+
+
+
+# dependency checking support
+.depcheck-impl:
+#	@echo "# This code depends on make tool being used" >.dep.inc
+#	@if [ -n "${MAKE_VERSION}" ]; then \
+#	    echo "DEPFILES=\$$(wildcard \$$(addsuffix .d, \$${OBJECTFILES}))" >>.dep.inc; \
+#	    echo "ifneq (\$${DEPFILES},)" >>.dep.inc; \
+#	    echo "include \$${DEPFILES}" >>.dep.inc; \
+#	    echo "endif" >>.dep.inc; \
+#	else \
+#	    echo ".KEEP_STATE:" >>.dep.inc; \
+#	    echo ".KEEP_STATE_FILE:.make.state.\$${CONF}" >>.dep.inc; \
+#	fi

WZYX_UART_V1.1250726.X/WZYX_UART_V1.1250726.X/nbproject/Makefile-local-default.mk

@@ -0,0 +1,37 @@
+#
+# Generated Makefile - do not edit!
+#
+#
+# This file contains information about the location of compilers and other tools.
+# If you commmit this file into your revision control server, you will be able to 
+# to checkout the project and build it from the command line with make. However,
+# if more than one person works on the same project, then this file might show
+# conflicts since different users are bound to have compilers in different places.
+# In that case you might choose to not commit this file and let MPLAB X recreate this file
+# for each user. The disadvantage of not commiting this file is that you must run MPLAB X at
+# least once so the file gets created and the project can be built. Finally, you can also
+# avoid using this file at all if you are only building from the command line with make.
+# You can invoke make with the values of the macros:
+# $ makeMP_CC="/opt/microchip/mplabc30/v3.30c/bin/pic30-gcc" ...  
+#
+SHELL=cmd.exe
+PATH_TO_IDE_BIN=D:/Program Files/Microchip/MPLABX/v6.15/mplab_platform/platform/../mplab_ide/modules/../../bin/
+# Adding MPLAB X bin directory to path.
+PATH:=D:/Program Files/Microchip/MPLABX/v6.15/mplab_platform/platform/../mplab_ide/modules/../../bin/:$(PATH)
+# Path to java used to run MPLAB X when this makefile was created
+MP_JAVA_PATH="D:\Program Files\Microchip\MPLABX\v6.15\sys\java\zulu8.64.0.19-ca-fx-jre8.0.345-win_x64/bin/"
+OS_CURRENT="$(shell uname -s)"
+MP_CC="D:\Program Files\Microchip\xc16\v2.10\bin\xc16-gcc.exe"
+# MP_CPPC is not defined
+# MP_BC is not defined
+MP_AS="D:\Program Files\Microchip\xc16\v2.10\bin\xc16-as.exe"
+MP_LD="D:\Program Files\Microchip\xc16\v2.10\bin\xc16-ld.exe"
+MP_AR="D:\Program Files\Microchip\xc16\v2.10\bin\xc16-ar.exe"
+DEP_GEN=${MP_JAVA_PATH}java -jar "D:/Program Files/Microchip/MPLABX/v6.15/mplab_platform/platform/../mplab_ide/modules/../../bin/extractobjectdependencies.jar"
+MP_CC_DIR="D:\Program Files\Microchip\xc16\v2.10\bin"
+# MP_CPPC_DIR is not defined
+# MP_BC_DIR is not defined
+MP_AS_DIR="D:\Program Files\Microchip\xc16\v2.10\bin"
+MP_LD_DIR="D:\Program Files\Microchip\xc16\v2.10\bin"
+MP_AR_DIR="D:\Program Files\Microchip\xc16\v2.10\bin"
+DFP_DIR=D:/Program Files/Microchip/MPLABX/v6.15/packs/Microchip/PIC24F-GL-GU_DFP/1.5.121

WZYX_UART_V1.1250726.X/WZYX_UART_V1.1250726.X/nbproject/Makefile-variables.mk

@@ -0,0 +1,10 @@
+#
+# Generated - do not edit!
+#
+# NOCDDL
+#
+CND_BASEDIR=`pwd`
+# default configuration
+CND_ARTIFACT_DIR_default=dist/default/production
+CND_ARTIFACT_NAME_default=WZYX_UART_V1.1250726.X.production.hex
+CND_ARTIFACT_PATH_default=dist/default/production/WZYX_UART_V1.1250726.X.production.hex

WZYX_UART_V1.1250726.X/WZYX_UART_V1.1250726.X/nbproject/configurations.xml

@@ -0,0 +1,1322 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<configurationDescriptor version="65">
+  <logicalFolder name="root" displayName="root" projectFiles="true">
+    <logicalFolder name="HeaderFiles" displayName="头文件" projectFiles="true">
+      <itemPath>Uart.h</itemPath>
+      <itemPath>Pin.h</itemPath>
+      <itemPath>Delay.h</itemPath>
+      <itemPath>User.h</itemPath>
+    </logicalFolder>
+    <logicalFolder name="SourceFiles" displayName="源文件" projectFiles="true">
+      <itemPath>main.c</itemPath>
+      <itemPath>Delay.c</itemPath>
+      <itemPath>Pin.c</itemPath>
+      <itemPath>Uart.c</itemPath>
+    </logicalFolder>
+    <logicalFolder name="LinkerScript" displayName="链接器文件" projectFiles="true">
+    </logicalFolder>
+    <logicalFolder name="ExternalFiles" displayName="重要文件" projectFiles="false">
+      <itemPath>Makefile</itemPath>
+    </logicalFolder>
+  </logicalFolder>
+  <sourceRootList>
+    <Elem>.</Elem>
+    <Elem>../../../../../11. N8/01.Code/current/N8_PCR_N1.20230213/NQ8QPCR_NO2.20230823.X/file</Elem>
+  </sourceRootList>
+  <projectmakefile>Makefile</projectmakefile>
+  <confs>
+    <conf name="default" type="2">
+      <toolsSet>
+        <developmentServer>localhost</developmentServer>
+        <targetDevice>PIC24FJ512GU410</targetDevice>
+        <targetHeader></targetHeader>
+        <targetPluginBoard></targetPluginBoard>
+        <platformTool>PICkit3PlatformTool</platformTool>
+        <languageToolchain>XC16</languageToolchain>
+        <languageToolchainVersion>2.10</languageToolchainVersion>
+        <platform>3</platform>
+      </toolsSet>
+      <packs>
+        <pack name="PIC24F-GL-GU_DFP" vendor="Microchip" version="1.5.121"/>
+      </packs>
+      <ScriptingSettings>
+      </ScriptingSettings>
+      <compileType>
+        <linkerTool>
+          <linkerLibItems>
+          </linkerLibItems>
+        </linkerTool>
+        <archiverTool>
+        </archiverTool>
+        <loading>
+          <useAlternateLoadableFile>false</useAlternateLoadableFile>
+          <parseOnProdLoad>false</parseOnProdLoad>
+          <alternateLoadableFile></alternateLoadableFile>
+        </loading>
+        <subordinates>
+        </subordinates>
+      </compileType>
+      <makeCustomizationType>
+        <makeCustomizationPreStepEnabled>false</makeCustomizationPreStepEnabled>
+        <makeUseCleanTarget>false</makeUseCleanTarget>
+        <makeCustomizationPreStep></makeCustomizationPreStep>
+        <makeCustomizationPostStepEnabled>false</makeCustomizationPostStepEnabled>
+        <makeCustomizationPostStep></makeCustomizationPostStep>
+        <makeCustomizationPutChecksumInUserID>false</makeCustomizationPutChecksumInUserID>
+        <makeCustomizationEnableLongLines>false</makeCustomizationEnableLongLines>
+        <makeCustomizationNormalizeHexFile>false</makeCustomizationNormalizeHexFile>
+      </makeCustomizationType>
+      <C30>
+        <property key="cast-align" value="false"/>
+        <property key="code-model" value="default"/>
+        <property key="const-model" value="default"/>
+        <property key="data-model" value="default"/>
+        <property key="disable-instruction-scheduling" value="false"/>
+        <property key="enable-all-warnings" value="true"/>
+        <property key="enable-ansi-std" value="false"/>
+        <property key="enable-ansi-warnings" value="false"/>
+        <property key="enable-fatal-warnings" value="false"/>
+        <property key="enable-large-arrays" value="false"/>
+        <property key="enable-omit-frame-pointer" value="false"/>
+        <property key="enable-procedural-abstraction" value="false"/>
+        <property key="enable-short-double" value="false"/>
+        <property key="enable-symbols" value="true"/>
+        <property key="enable-unroll-loops" value="false"/>
+        <property key="expand-pragma-config" value="false"/>
+        <property key="extra-include-directories" value=""/>
+        <property key="isolate-each-function" value="false"/>
+        <property key="keep-inline" value="false"/>
+        <property key="oXC16gcc-align-arr" value="false"/>
+        <property key="oXC16gcc-cnsts-mauxflash" value="false"/>
+        <property key="oXC16gcc-data-sects" value="false"/>
+        <property key="oXC16gcc-errata" value=""/>
+        <property key="oXC16gcc-fillupper" value=""/>
+        <property key="oXC16gcc-large-aggregate" value="false"/>
+        <property key="oXC16gcc-mauxflash" value="false"/>
+        <property key="oXC16gcc-mpa-lvl" value=""/>
+        <property key="oXC16gcc-name-text-sec" value=""/>
+        <property key="oXC16gcc-near-chars" value="false"/>
+        <property key="oXC16gcc-no-isr-warn" value="false"/>
+        <property key="oXC16gcc-sfr-warn" value="false"/>
+        <property key="oXC16gcc-smar-io-lvl" value="1"/>
+        <property key="oXC16gcc-smart-io-fmt" value=""/>
+        <property key="optimization-level" value="0"/>
+        <property key="post-instruction-scheduling" value="default"/>
+        <property key="pre-instruction-scheduling" value="default"/>
+        <property key="preprocessor-macros" value=""/>
+        <property key="scalar-model" value="default"/>
+        <property key="use-cci" value="false"/>
+        <property key="use-iar" value="false"/>
+      </C30>
+      <C30-AR>
+        <property key="additional-options-chop-files" value="false"/>
+      </C30-AR>
+      <C30-AS>
+        <property key="assembler-symbols" value=""/>
+        <property key="expand-macros" value="false"/>
+        <property key="extra-include-directories-for-assembler" value=""/>
+        <property key="extra-include-directories-for-preprocessor" value=""/>
+        <property key="false-conditionals" value="false"/>
+        <property key="keep-locals" value="false"/>
+        <property key="list-assembly" value="false"/>
+        <property key="list-section-info" value="false"/>
+        <property key="list-source" value="false"/>
+        <property key="list-symbols" value="false"/>
+        <property key="oXC16asm-extra-opts" value=""/>
+        <property key="oXC16asm-list-to-file" value="false"/>
+        <property key="omit-debug-dirs" value="false"/>
+        <property key="omit-forms" value="false"/>
+        <property key="preprocessor-macros" value=""/>
+        <property key="relax" value="false"/>
+        <property key="warning-level" value="emit-warnings"/>
+      </C30-AS>
+      <C30-CO>
+        <property key="coverage-enable" value=""/>
+        <property key="stack-guidance" value="false"/>
+      </C30-CO>
+      <C30-LD>
+        <property key="additional-options-use-response-files" value="false"/>
+        <property key="boot-eeprom" value="no_eeprom"/>
+        <property key="boot-flash" value="no_flash"/>
+        <property key="boot-ram" value="no_ram"/>
+        <property key="boot-write-protect" value="no_write_protect"/>
+        <property key="enable-check-sections" value="false"/>
+        <property key="enable-data-init" value="true"/>
+        <property key="enable-default-isr" value="true"/>
+        <property key="enable-handles" value="true"/>
+        <property key="enable-pack-data" value="true"/>
+        <property key="extra-lib-directories" value=""/>
+        <property key="fill-flash-options-addr" value=""/>
+        <property key="fill-flash-options-const" value=""/>
+        <property key="fill-flash-options-how" value="0"/>
+        <property key="fill-flash-options-inc-const" value="1"/>
+        <property key="fill-flash-options-increment" value=""/>
+        <property key="fill-flash-options-seq" value=""/>
+        <property key="fill-flash-options-what" value="0"/>
+        <property key="general-code-protect" value="no_code_protect"/>
+        <property key="general-write-protect" value="no_write_protect"/>
+        <property key="generate-cross-reference-file" value="false"/>
+        <property key="heap-size" value=""/>
+        <property key="input-libraries" value=""/>
+        <property key="linker-stack" value="true"/>
+        <property key="linker-symbols" value=""/>
+        <property key="map-file" value="${DISTDIR}/${PROJECTNAME}.${IMAGE_TYPE}.map"/>
+        <property key="no-ivt" value="false"/>
+        <property key="oXC16ld-extra-opts" value=""/>
+        <property key="oXC16ld-fill-upper" value="0"/>
+        <property key="oXC16ld-force-link" value="false"/>
+        <property key="oXC16ld-no-smart-io" value="false"/>
+        <property key="oXC16ld-nostdlib" value="false"/>
+        <property key="oXC16ld-stackguard" value="16"/>
+        <property key="preprocessor-macros" value=""/>
+        <property key="remove-unused-sections" value="false"/>
+        <property key="report-memory-usage" value="true"/>
+        <property key="secure-eeprom" value="no_eeprom"/>
+        <property key="secure-flash" value="no_flash"/>
+        <property key="secure-ram" value="no_ram"/>
+        <property key="secure-write-protect" value="no_write_protect"/>
+        <property key="stack-size" value="16"/>
+        <property key="symbol-stripping" value=""/>
+        <property key="trace-symbols" value=""/>
+        <property key="warn-section-align" value="false"/>
+      </C30-LD>
+      <C30Global>
+        <property key="combine-sourcefiles" value="false"/>
+        <property key="common-include-directories" value=""/>
+        <property key="dual-boot-partition" value="0"/>
+        <property key="fast-math" value="false"/>
+        <property key="generic-16-bit" value="false"/>
+        <property key="legacy-libc" value="true"/>
+        <property key="mpreserve-all" value="false"/>
+        <property key="oXC16glb-macros" value=""/>
+        <property key="omit-pack-options" value="1"/>
+        <property key="output-file-format" value="elf"/>
+        <property key="preserve-all" value="false"/>
+        <property key="preserve-file" value=""/>
+        <property key="relaxed-math" value="false"/>
+        <property key="save-temps" value="false"/>
+      </C30Global>
+      <PICkit3PlatformTool>
+        <property key="ADC 1" value="true"/>
+        <property key="AutoSelectMemRanges" value="auto"/>
+        <property key="CLC 1" value="true"/>
+        <property key="CLC 2" value="true"/>
+        <property key="CLC 3" value="true"/>
+        <property key="CLC 4" value="true"/>
+        <property key="COMPARATOR" value="true"/>
+        <property key="CRC" value="true"/>
+        <property key="DMA" value="true"/>
+        <property key="Freeze All Other Peripherals" value="true"/>
+        <property key="I2C 1" value="true"/>
+        <property key="I2C 2" value="true"/>
+        <property key="I2C 3" value="true"/>
+        <property key="IOC" value="true"/>
+        <property key="LCD" value="true"/>
+        <property key="LVD" value="true"/>
+        <property key="MCCP/SCCP 1" value="true"/>
+        <property key="MCCP/SCCP 2" value="true"/>
+        <property key="MCCP/SCCP 3" value="true"/>
+        <property key="MCCP/SCCP 4" value="true"/>
+        <property key="MCCP/SCCP 5" value="true"/>
+        <property key="MCCP/SCCP 6" value="true"/>
+        <property key="MCCP/SCCP 7" value="true"/>
+        <property key="MCCP/SCCP 8" value="true"/>
+        <property key="OSC" value="true"/>
+        <property key="REFO" value="true"/>
+        <property key="RTCC" value="true"/>
+        <property key="SPI 1" value="true"/>
+        <property key="SPI 2" value="true"/>
+        <property key="SPI 3" value="true"/>
+        <property key="SPI 4" value="true"/>
+        <property key="SecureSegment.SegmentProgramming" value="FullChipProgramming"/>
+        <property key="TIMER 1" value="true"/>
+        <property key="TIMER 2" value="true"/>
+        <property key="TIMER 3" value="true"/>
+        <property key="TIMER 4" value="true"/>
+        <property key="TIMER 5" value="true"/>
+        <property key="ToolFirmwareFilePath"
+                  value="Press to browse for a specific firmware version"/>
+        <property key="ToolFirmwareOption.UseLatestFirmware" value="true"/>
+        <property key="UART 1" value="true"/>
+        <property key="UART 2" value="true"/>
+        <property key="UART 3" value="true"/>
+        <property key="UART 4" value="true"/>
+        <property key="UART 5" value="true"/>
+        <property key="UART 6" value="true"/>
+        <property key="USB" value="true"/>
+        <property key="debugoptions.debug-startup" value="Use system settings"/>
+        <property key="debugoptions.reset-behaviour" value="Use system settings"/>
+        <property key="debugoptions.useswbreakpoints" value="false"/>
+        <property key="event.recorder.enabled" value="false"/>
+        <property key="event.recorder.scvd.files" value=""/>
+        <property key="firmware.download.all" value="false"/>
+        <property key="hwtoolclock.frcindebug" value="false"/>
+        <property key="lastid" value=""/>
+        <property key="memories.aux" value="false"/>
+        <property key="memories.bootflash" value="true"/>
+        <property key="memories.configurationmemory" value="true"/>
+        <property key="memories.configurationmemory2" value="true"/>
+        <property key="memories.dataflash" value="true"/>
+        <property key="memories.eeprom" value="true"/>
+        <property key="memories.flashdata" value="true"/>
+        <property key="memories.id" value="true"/>
+        <property key="memories.instruction.ram" value="true"/>
+        <property key="memories.instruction.ram.ranges"
+                  value="${memories.instruction.ram.ranges}"/>
+        <property key="memories.programmemory" value="true"/>
+        <property key="memories.programmemory.ranges" value="0-55eff"/>
+        <property key="poweroptions.powerenable" value="false"/>
+        <property key="programmertogo.imagename" value=""/>
+        <property key="programoptions.donoteraseauxmem" value="false"/>
+        <property key="programoptions.eraseb4program" value="true"/>
+        <property key="programoptions.pgmspeed" value="2"/>
+        <property key="programoptions.preservedataflash" value="false"/>
+        <property key="programoptions.preservedataflash.ranges"
+                  value="${programoptions.preservedataflash.ranges}"/>
+        <property key="programoptions.preserveeeprom" value="false"/>
+        <property key="programoptions.preserveeeprom.ranges" value=""/>
+        <property key="programoptions.preserveprogram.ranges" value=""/>
+        <property key="programoptions.preserveprogramrange" value="false"/>
+        <property key="programoptions.preserveuserid" value="false"/>
+        <property key="programoptions.programcalmem" value="false"/>
+        <property key="programoptions.programuserotp" value="false"/>
+        <property key="programoptions.testmodeentrymethod" value="VDDFirst"/>
+        <property key="programoptions.usehighvoltageonmclr" value="false"/>
+        <property key="programoptions.uselvpprogramming" value="false"/>
+        <property key="voltagevalue" value="3.25"/>
+      </PICkit3PlatformTool>
+      <Simulator>
+        <property key="codecoverage.enabled" value="Disable"/>
+        <property key="codecoverage.enableoutputtofile" value="false"/>
+        <property key="codecoverage.outputfile" value=""/>
+        <property key="debugoptions.debug-startup" value="Use system settings"/>
+        <property key="debugoptions.reset-behaviour" value="Use system settings"/>
+        <property key="event.recorder.enabled" value="false"/>
+        <property key="event.recorder.scvd.files" value=""/>
+        <property key="lastid" value=""/>
+        <property key="oscillator.auxfrequency" value="120"/>
+        <property key="oscillator.auxfrequencyunit" value="Mega"/>
+        <property key="oscillator.frequency" value="1"/>
+        <property key="oscillator.frequencyunit" value="Mega"/>
+        <property key="oscillator.rcfrequency" value="250"/>
+        <property key="oscillator.rcfrequencyunit" value="Kilo"/>
+        <property key="periphADC1.altscl" value="false"/>
+        <property key="periphADC1.minTacq" value=""/>
+        <property key="periphADC1.tacqunits" value="microseconds"/>
+        <property key="periphADC2.altscl" value="false"/>
+        <property key="periphADC2.minTacq" value=""/>
+        <property key="periphADC2.tacqunits" value="microseconds"/>
+        <property key="periphComp1.gte" value="gt"/>
+        <property key="periphComp2.gte" value="gt"/>
+        <property key="periphComp3.gte" value="gt"/>
+        <property key="periphComp4.gte" value="gt"/>
+        <property key="periphComp5.gte" value="gt"/>
+        <property key="periphComp6.gte" value="gt"/>
+        <property key="reset.scl" value="false"/>
+        <property key="reset.type" value="MCLR"/>
+        <property key="toolpack.updateoptions"
+                  value="toolpack.updateoptions.uselatestoolpack"/>
+        <property key="toolpack.updateoptions.packversion"
+                  value="Press to select which tool pack to use"/>
+        <property key="tracecontrol.include.timestamp" value="summarydataenabled"/>
+        <property key="tracecontrol.select" value="0"/>
+        <property key="tracecontrol.stallontracebufferfull" value="false"/>
+        <property key="tracecontrol.timestamp" value="0"/>
+        <property key="tracecontrol.tracebufmax" value="546000"/>
+        <property key="tracecontrol.tracefile" value="defmplabxtrace.log"/>
+        <property key="tracecontrol.traceresetonrun" value="false"/>
+        <property key="uart0io.output" value="window"/>
+        <property key="uart0io.outputfile" value=""/>
+        <property key="uart0io.uartioenabled" value="false"/>
+        <property key="uart1io.output" value="window"/>
+        <property key="uart1io.outputfile" value=""/>
+        <property key="uart1io.uartioenabled" value="false"/>
+        <property key="uart2io.output" value="window"/>
+        <property key="uart2io.outputfile" value=""/>
+        <property key="uart2io.uartioenabled" value="false"/>
+        <property key="uart3io.output" value="window"/>
+        <property key="uart3io.outputfile" value=""/>
+        <property key="uart3io.uartioenabled" value="false"/>
+        <property key="uart4io.output" value="window"/>
+        <property key="uart4io.outputfile" value=""/>
+        <property key="uart4io.uartioenabled" value="false"/>
+        <property key="uart5io.output" value="window"/>
+        <property key="uart5io.outputfile" value=""/>
+        <property key="uart5io.uartioenabled" value="false"/>
+        <property key="uart6io.output" value="window"/>
+        <property key="uart6io.outputfile" value=""/>
+        <property key="uart6io.uartioenabled" value="false"/>
+        <property key="usart0io.output" value="window"/>
+        <property key="usart0io.outputfile" value=""/>
+        <property key="usart0io.uartioenabled" value="false"/>
+        <property key="usart1io.output" value="window"/>
+        <property key="usart1io.outputfile" value=""/>
+        <property key="usart1io.uartioenabled" value="false"/>
+        <property key="usart2io.output" value="window"/>
+        <property key="usart2io.outputfile" value=""/>
+        <property key="usart2io.uartioenabled" value="false"/>
+        <property key="usart3io.output" value="window"/>
+        <property key="usart3io.outputfile" value=""/>
+        <property key="usart3io.uartioenabled" value="false"/>
+        <property key="usart4io.output" value="window"/>
+        <property key="usart4io.outputfile" value=""/>
+        <property key="usart4io.uartioenabled" value="false"/>
+        <property key="usartc0io.output" value="window"/>
+        <property key="usartc0io.outputfile" value=""/>
+        <property key="usartc0io.uartioenabled" value="false"/>
+        <property key="usartc1io.output" value="window"/>
+        <property key="usartc1io.outputfile" value=""/>
+        <property key="usartc1io.uartioenabled" value="false"/>
+        <property key="usartd0io.output" value="window"/>
+        <property key="usartd0io.outputfile" value=""/>
+        <property key="usartd0io.uartioenabled" value="false"/>
+        <property key="usartd1io.output" value="window"/>
+        <property key="usartd1io.outputfile" value=""/>
+        <property key="usartd1io.uartioenabled" value="false"/>
+        <property key="usarte0io.output" value="window"/>
+        <property key="usarte0io.outputfile" value=""/>
+        <property key="usarte0io.uartioenabled" value="false"/>
+        <property key="usarte1io.output" value="window"/>
+        <property key="usarte1io.outputfile" value=""/>
+        <property key="usarte1io.uartioenabled" value="false"/>
+        <property key="usarte2io.output" value="window"/>
+        <property key="usarte2io.outputfile" value=""/>
+        <property key="usarte2io.uartioenabled" value="false"/>
+        <property key="usartf0io.output" value="window"/>
+        <property key="usartf0io.outputfile" value=""/>
+        <property key="usartf0io.uartioenabled" value="false"/>
+        <property key="usartf1io.output" value="window"/>
+        <property key="usartf1io.outputfile" value=""/>
+        <property key="usartf1io.uartioenabled" value="false"/>
+        <property key="warningmessagebreakoptions.W0001_CORE_BITREV_MODULO_EN"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0002_CORE_SECURE_MEMORYACCESS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0003_CORE_SW_RESET" value="report"/>
+        <property key="warningmessagebreakoptions.W0004_CORE_WDT_RESET" value="report"/>
+        <property key="warningmessagebreakoptions.W0005_CORE_IOPUW_RESET"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0006_CORE_CODE_GUARD_PFC_RESET"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0007_CORE_DO_LOOP_STACK_UNDERFLOW"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0008_CORE_DO_LOOP_STACK_OVERFLOW"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0009_CORE_NESTED_DO_LOOP_RANGE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0010_CORE_SIM32_ODD_WORDACCESS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0011_CORE_SIM32_UNIMPLEMENTED_RAMACCESS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0012_CORE_STACK_OVERFLOW_RESET"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0013_CORE_STACK_UNDERFLOW_RESET"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0014_CORE_INVALID_OPCODE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0015_CORE_INVALID_ALT_WREG_SET"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0016_CORE_STACK_ERROR"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0017_CORE_ODD_RAMWORDACCESS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0018_CORE_UNIMPLEMENTED_RAMACCESS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0019_CORE_UNIMPLEMENTED_PROMACCESS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0020_CORE_ACCESS_NOTIN_X_SPACE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0021_CORE_ACCESS_NOTIN_Y_SPACE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0022_CORE_XMODEND_LESS_XMODSRT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0023_CORE_YMODEND_LESS_YMODSRT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0024_CORE_BITREV_MOD_IS_ZERO"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0025_CORE_HARD_TRAP" value="report"/>
+        <property key="warningmessagebreakoptions.W0026_CORE_UNIMPLEMENTED_MEMORYACCESS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0027_CORE_UNIMPLEMENTED_EDSACCESS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0028_TBLRD_WORM_CONFIG_MEMORY"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0029_TBLRD_DEVICE_ID" value="report"/>
+        <property key="warningmessagebreakoptions.W0030_CORE_UNIMPLEMENTED_MEMORY_ACCESS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0031_BSLIM_INSUFFICIENT_BOOT_SEGMENT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0032_BSLIM_LIMITS_EXCEEDS_PROG_MEMORY"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0033_CORE_UNPREDICTABLE_OPCODE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0034_CORE_UNALIGNED_MEMORY_ACCESS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0035_CORE_UNIMPLEMENTED_RAMACCESS_NOTRAP"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0036_UNIMPLEMENTED_INSTRUCTION"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0040_FPU_DIFF_CP10_CP11"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0041_FPU_ACCESS_DENIED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0042_FPU_PRIVILEGED_ACCESS_ONLY"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0043_FPU_CP_RESERVED_VALUE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0044_FPU_OUT_OF_RANGE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0051_INSTRUCTION_DIV_NOT_ENOUGH_REPEAT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0052_INSTRUCTION_DIV_TOO_MANY_REPEAT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0053_INVALID_INTCON_VS_FIELD_VALUE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0101_SIM_UPDATE_FAILED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0102_SIM_PERIPH_MISSING"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0103_SIM_PERIPH_FAILED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0104_SIM_FAILED_TO_INIT_TOOL"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0105_SIM_INVALID_FIELD"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0106_SIM_PERIPH_PARTIAL_SUPPORT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0107_SIM_NOT_SUPPORTED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0108_SIM_RESERVED_SETTING"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0109_SIM_PERIPHERAL_IN_DEVELOPMENT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0110_SIM_UNEXPECTED_EVENT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0111_SIM_UNSUPPORTED_SELECTION"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0112_SIM_INVALID_OPERATION"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0113_SIM_WRITE_TO_PROTECTED_SFR"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0114_SIM_INVALID_KEY" value="report"/>
+        <property key="warningmessagebreakoptions.W0115_SIM_FAILED_TO_PARSE_DEVICE_FILE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0116_SIM_STACK_OVERFLOW"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0117_SIM_STACK_UNDERFLOW"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0118_SIM_INVALID_FIELD_VALUE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0119_SIM_SAMPLING_RATE_VIOLATION"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0201_ADC_NO_STIMULUS_FILE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0202_ADC_GO_DONE_BIT" value="report"/>
+        <property key="warningmessagebreakoptions.W0203_ADC_MINIMUM_2_TAD"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0204_ADC_TAD_TOO_SMALL"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0205_ADC_UNEXPECTED_TRANSITION"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0206_ADC_SAMP_TIME_TOO_SHORT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0207_ADC_NO_PINS_SCANNED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0208_ADC_UNSUPPORTED_CLOCK_SOURCE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0209_ADC_ANALOG_CHANNEL_DIGITAL"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0210_ADC_ANALOG_CHANNEL_OUTPUT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0211_ADC_PIN_INVALID_CHANNEL"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0212_ADC_BAND_GAP_NOT_SUPPORTED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0213_ADC_RESERVED_SSRC"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0214_ADC_POSITIVE_INPUT_DIGITAL"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0215_ADC_POSITIVE_INPUT_OUTPUT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0216_ADC_NEGATIVE_INPUT_DIGITAL"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0217_ADC_NEGATIVE_INPUT_OUTPUT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0218_ADC_REFERENCE_HIGH_DIGITAL"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0219_ADC_REFERENCE_HIGH_OUTPUT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0220_ADC_REFERENCE_LOW_DIGITAL"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0221_ADC_REFERENCE_LOW_OUTPUT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0222_ADC_OVERFLOW" value="report"/>
+        <property key="warningmessagebreakoptions.W0223_ADC_UNDERFLOW" value="report"/>
+        <property key="warningmessagebreakoptions.W0224_ADC_CTMU_NOT_SUPPORTED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0225_ADC_INVALID_CH0S"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0226_ADC_VBAT_NOT_SUPPORTED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0227_ADC_INVALID_ADCS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0228_ADC_INVALID_ADCS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0229_ADC_INVALID_ADCS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0230_ADC_TRIGSEL_NOT_SUPPORTED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0231_ADC_NOT_WARMED" value="report"/>
+        <property key="warningmessagebreakoptions.W0232_ADC_CALIBRATION_ABORTED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0233_ADC_CORE_POWERED_EARLY"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0234_ADC_ALREADY_CALIBRATING"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0235_ADC_CAL_TYPE_CHANGED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0236_ADC_CAL_INVALIDATED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0237_ADC_UNKNOWN_DATASHEET"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0238_ADC_INVALID_SFR_FIELD_VALUE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0239_ADC_UNSUPPORTED_INPUT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0240_ADC_NOT_CALIBRATED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0241_ADC_FRACTIONAL_NOT_ALLOWED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0242_ADC_BG_INT_BEFORE_PWR"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0243_ADC_INVALID_TAD" value="report"/>
+        <property key="warningmessagebreakoptions.W0244_ADC_CONVERSION_ABORTED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0245_ADC_BUFREGEN_NOT_ALLOWED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0246_ADC_ACCUMULATION_BAD_RESSEL"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0247_ADC_CONVERSION_BAD_RESSEL"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0300_NVM_WR_BEFORE_KEY_SEQ"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0400_PWM_PWM_FASTER_THAN_FOSC"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0600_WDT_2ND_WDT_MR_WRITE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0601_WDT_EXPIRED" value="report"/>
+        <property key="warningmessagebreakoptions.W0601_WDT_RESET_OUTSIDE_WINDOW"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0700_CLC_GENERAL_WARNING"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0701_CLC_CLCOUT_AS_INPUT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0702_CLC_CIRCULAR_LOOP"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0800_ACC_INPUT_INVALID_CONFIG"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0801_ACC_INPUT_NOT_SUPPORTED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0802_ACC_INVERTED_WINDOW_LIMITS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0803_ACC_MISMATCHED_POS_INPUTS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0804_ACC_WINDOW_COMP_DISABLED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0805_ACC_WINDOW_COMPS_MODES"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0806_ACC_FEATURE_NOT_SUPPORTED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W10001_RESERVED_IRQ_HANDLER_INVOKED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W10002_UNSUPPORTED_CLK_SOURCE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W10101_UNSUPPORTED_CHANNEL_MODE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W10102_UNSUPPORTED_CLK_SOURCE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W10103_UNSUPPORTED_RECEIVER_FILTER"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W10301_NO_PORT_PINS_FOUND"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W10500_UNSUPPORTED_SOURCE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W1201_DATAFLASH_MEM_OUTSIDE_RANGE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W1202_DATAFLASH_ERASE_WHILE_LOCKED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W1203_DATAFLASH_WRITE_WHILE_LOCKED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W1401_DMA_PERIPH_NOT_AVAIL"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W1402_DMA_INVALID_IRQ" value="report"/>
+        <property key="warningmessagebreakoptions.W1403_DMA_INVALID_SFR" value="report"/>
+        <property key="warningmessagebreakoptions.W1404_DMA_INVALID_DMA_ADDR"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W1405_DMA_IRQ_DIR_MISMATCH"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W1600_PPS_INVALID_MAP" value="report"/>
+        <property key="warningmessagebreakoptions.W1601_PPS_INVALID_PIN_DESCRIPTION"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W1800_PWM_TIMER_SELECTION_NOT_AVIALABLE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W1801_PWM_TIMER_SELECTION_BAD_CLOCK_INPUT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W1802_PWM_TIMER_MISSING_PERSCALER_INFO"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W2001_INPUTCAPTURE_TMR3_UNAVAILABLE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W2002_INPUTCAPTURE_CAPTURE_EMPTY"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W2003_INPUTCAPTURE_SYNCSEL_NOT_AVIALABLE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W2004_INPUTCAPTURE_BAD_SYNC_SOURCE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W2501_OUTPUTCOMPARE_SYNCSEL_NOT_AVIALABLE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W2502_OUTPUTCOMPARE_BAD_SYNC_SOURCE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W2503_OUTPUTCOMPARE_BAD_TRIGGER_SOURCE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W2700_MPU_ILLEGAL_DREGION"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W2701_MPU_INVALID_REGION"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W3000_LPM_READ_PROTECTION_SECTION"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W3010_SPM_WRITE_PROTECTION_SECTION"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W6001_RTT_FORBIDDEN_RTPRES"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W6002_RTT_BAD_WRITING_ALMV"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W6003_RTT_BAD_WRITING_RTPRES"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W7001_SMT_CLK_SELECTION_NOT_SUPPORT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W7002_SMT_SIG_SELECTION_NOT_SUPPORT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W7003_SMT_WIN_SELECTION_NOT_SUPPORT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W8001_OSC_INVALID_CLOCK_SOURCE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W8002_OSC_RESERVED_FEXTOSC"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9001_TMR_GATE_AND_EXTCLOCK_ENABLED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9002_TMR_NO_PIN_AVAILABLE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9003_TMR_INVALID_CLOCK_SOURCE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9201_UART_TX_OVERFLOW"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9202_UART_TX_CAPTUREFILE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9203_UART_TX_INVALIDINTERRUPTMODE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9204_UART_RX_EMPTY_QUEUE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9205_UART_TX_BADFILE" value="report"/>
+        <property key="warningmessagebreakoptions.W9206_UART_RESERVED_MODE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9207_UART_UNABLETOCLOSE_FILE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9401_CVREF_INVALIDSOURCESELECTION"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9402_CVREF_INPUT_OUTPUTPINCONFLICT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9601_COMP_FVR_SOURCE_UNAVAILABLE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9602_COMP_DAC_SOURCE_UNAVAILABLE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9603_COMP_CVREF_SOURCE_UNAVAILABLE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9604_COMP_SLOPE_SOURCE_UNAVAILABLE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9605_COMP_PRG_SOURCE_UNAVAILABLE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9607_COMP_DGTL_FLTR_OPTION_UNAVAILABLE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9609_COMP_DGTL_FLTR_CLK_UNAVAILABLE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9801_FVR_INVALID_MODE_SELECTION"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9801_SCL_BAD_SUBTYPE_INDICATION"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9802_SCL_FILE_NOT_FOUND"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9803_SCL_FAILED_TO_READ_FILE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9804_SCL_UNRECOGNIZED_LABEL"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9805_SCL_UNRECOGNIZED_VAR"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9901_RTSP_INVALID_OPERATION_SELECTION"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9902_RTSP_FLASH_PROGRAM_WRITE_PROTECTED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.displaywarningmessagesoption"
+                  value=""/>
+        <property key="warningmessagebreakoptions.warningmessages" value="holdstate"/>
+      </Simulator>
+      <Tool>
+        <property key="ADC 1" value="true"/>
+        <property key="AutoSelectMemRanges" value="auto"/>
+        <property key="CLC 1" value="true"/>
+        <property key="CLC 2" value="true"/>
+        <property key="CLC 3" value="true"/>
+        <property key="CLC 4" value="true"/>
+        <property key="COMPARATOR" value="true"/>
+        <property key="CRC" value="true"/>
+        <property key="DMA" value="true"/>
+        <property key="Freeze All Other Peripherals" value="true"/>
+        <property key="I2C 1" value="true"/>
+        <property key="I2C 2" value="true"/>
+        <property key="I2C 3" value="true"/>
+        <property key="IOC" value="true"/>
+        <property key="LCD" value="true"/>
+        <property key="LVD" value="true"/>
+        <property key="MCCP/SCCP 1" value="true"/>
+        <property key="MCCP/SCCP 2" value="true"/>
+        <property key="MCCP/SCCP 3" value="true"/>
+        <property key="MCCP/SCCP 4" value="true"/>
+        <property key="MCCP/SCCP 5" value="true"/>
+        <property key="MCCP/SCCP 6" value="true"/>
+        <property key="MCCP/SCCP 7" value="true"/>
+        <property key="MCCP/SCCP 8" value="true"/>
+        <property key="OSC" value="true"/>
+        <property key="REFO" value="true"/>
+        <property key="RTCC" value="true"/>
+        <property key="SPI 1" value="true"/>
+        <property key="SPI 2" value="true"/>
+        <property key="SPI 3" value="true"/>
+        <property key="SPI 4" value="true"/>
+        <property key="SecureSegment.SegmentProgramming" value="FullChipProgramming"/>
+        <property key="TIMER 1" value="true"/>
+        <property key="TIMER 2" value="true"/>
+        <property key="TIMER 3" value="true"/>
+        <property key="TIMER 4" value="true"/>
+        <property key="TIMER 5" value="true"/>
+        <property key="ToolFirmwareFilePath"
+                  value="Press to browse for a specific firmware version"/>
+        <property key="ToolFirmwareOption.UseLatestFirmware" value="true"/>
+        <property key="UART 1" value="true"/>
+        <property key="UART 2" value="true"/>
+        <property key="UART 3" value="true"/>
+        <property key="UART 4" value="true"/>
+        <property key="UART 5" value="true"/>
+        <property key="UART 6" value="true"/>
+        <property key="USB" value="true"/>
+        <property key="codecoverage.enabled" value="Disable"/>
+        <property key="codecoverage.enableoutputtofile" value="false"/>
+        <property key="codecoverage.outputfile" value=""/>
+        <property key="debugoptions.debug-startup" value="Use system settings"/>
+        <property key="debugoptions.reset-behaviour" value="Use system settings"/>
+        <property key="debugoptions.useswbreakpoints" value="false"/>
+        <property key="event.recorder.enabled" value="false"/>
+        <property key="event.recorder.scvd.files" value=""/>
+        <property key="firmware.download.all" value="false"/>
+        <property key="hwtoolclock.frcindebug" value="false"/>
+        <property key="lastid" value=""/>
+        <property key="memories.aux" value="false"/>
+        <property key="memories.bootflash" value="true"/>
+        <property key="memories.configurationmemory" value="true"/>
+        <property key="memories.configurationmemory2" value="true"/>
+        <property key="memories.dataflash" value="true"/>
+        <property key="memories.eeprom" value="true"/>
+        <property key="memories.flashdata" value="true"/>
+        <property key="memories.id" value="true"/>
+        <property key="memories.instruction.ram" value="true"/>
+        <property key="memories.instruction.ram.ranges"
+                  value="${memories.instruction.ram.ranges}"/>
+        <property key="memories.programmemory" value="true"/>
+        <property key="memories.programmemory.ranges" value="0-55eff"/>
+        <property key="oscillator.auxfrequency" value="120"/>
+        <property key="oscillator.auxfrequencyunit" value="Mega"/>
+        <property key="oscillator.frequency" value="1"/>
+        <property key="oscillator.frequencyunit" value="Mega"/>
+        <property key="oscillator.rcfrequency" value="250"/>
+        <property key="oscillator.rcfrequencyunit" value="Kilo"/>
+        <property key="periphADC1.altscl" value="false"/>
+        <property key="periphADC1.minTacq" value=""/>
+        <property key="periphADC1.tacqunits" value="microseconds"/>
+        <property key="periphADC2.altscl" value="false"/>
+        <property key="periphADC2.minTacq" value=""/>
+        <property key="periphADC2.tacqunits" value="microseconds"/>
+        <property key="periphComp1.gte" value="gt"/>
+        <property key="periphComp2.gte" value="gt"/>
+        <property key="periphComp3.gte" value="gt"/>
+        <property key="periphComp4.gte" value="gt"/>
+        <property key="periphComp5.gte" value="gt"/>
+        <property key="periphComp6.gte" value="gt"/>
+        <property key="poweroptions.powerenable" value="false"/>
+        <property key="programmertogo.imagename" value=""/>
+        <property key="programoptions.donoteraseauxmem" value="false"/>
+        <property key="programoptions.eraseb4program" value="true"/>
+        <property key="programoptions.pgmspeed" value="2"/>
+        <property key="programoptions.preservedataflash" value="false"/>
+        <property key="programoptions.preservedataflash.ranges"
+                  value="${programoptions.preservedataflash.ranges}"/>
+        <property key="programoptions.preserveeeprom" value="false"/>
+        <property key="programoptions.preserveeeprom.ranges" value=""/>
+        <property key="programoptions.preserveprogram.ranges" value=""/>
+        <property key="programoptions.preserveprogramrange" value="false"/>
+        <property key="programoptions.preserveuserid" value="false"/>
+        <property key="programoptions.programcalmem" value="false"/>
+        <property key="programoptions.programuserotp" value="false"/>
+        <property key="programoptions.testmodeentrymethod" value="VDDFirst"/>
+        <property key="programoptions.usehighvoltageonmclr" value="false"/>
+        <property key="programoptions.uselvpprogramming" value="false"/>
+        <property key="reset.scl" value="false"/>
+        <property key="reset.type" value="MCLR"/>
+        <property key="toolpack.updateoptions"
+                  value="toolpack.updateoptions.uselatestoolpack"/>
+        <property key="toolpack.updateoptions.packversion"
+                  value="Press to select which tool pack to use"/>
+        <property key="tracecontrol.include.timestamp" value="summarydataenabled"/>
+        <property key="tracecontrol.select" value="0"/>
+        <property key="tracecontrol.stallontracebufferfull" value="false"/>
+        <property key="tracecontrol.timestamp" value="0"/>
+        <property key="tracecontrol.tracebufmax" value="546000"/>
+        <property key="tracecontrol.tracefile" value="defmplabxtrace.log"/>
+        <property key="tracecontrol.traceresetonrun" value="false"/>
+        <property key="uart0io.output" value="window"/>
+        <property key="uart0io.outputfile" value=""/>
+        <property key="uart0io.uartioenabled" value="false"/>
+        <property key="uart1io.output" value="window"/>
+        <property key="uart1io.outputfile" value=""/>
+        <property key="uart1io.uartioenabled" value="false"/>
+        <property key="uart2io.output" value="window"/>
+        <property key="uart2io.outputfile" value=""/>
+        <property key="uart2io.uartioenabled" value="false"/>
+        <property key="uart3io.output" value="window"/>
+        <property key="uart3io.outputfile" value=""/>
+        <property key="uart3io.uartioenabled" value="false"/>
+        <property key="uart4io.output" value="window"/>
+        <property key="uart4io.outputfile" value=""/>
+        <property key="uart4io.uartioenabled" value="false"/>
+        <property key="uart5io.output" value="window"/>
+        <property key="uart5io.outputfile" value=""/>
+        <property key="uart5io.uartioenabled" value="false"/>
+        <property key="uart6io.output" value="window"/>
+        <property key="uart6io.outputfile" value=""/>
+        <property key="uart6io.uartioenabled" value="false"/>
+        <property key="usart0io.output" value="window"/>
+        <property key="usart0io.outputfile" value=""/>
+        <property key="usart0io.uartioenabled" value="false"/>
+        <property key="usart1io.output" value="window"/>
+        <property key="usart1io.outputfile" value=""/>
+        <property key="usart1io.uartioenabled" value="false"/>
+        <property key="usart2io.output" value="window"/>
+        <property key="usart2io.outputfile" value=""/>
+        <property key="usart2io.uartioenabled" value="false"/>
+        <property key="usart3io.output" value="window"/>
+        <property key="usart3io.outputfile" value=""/>
+        <property key="usart3io.uartioenabled" value="false"/>
+        <property key="usart4io.output" value="window"/>
+        <property key="usart4io.outputfile" value=""/>
+        <property key="usart4io.uartioenabled" value="false"/>
+        <property key="usartc0io.output" value="window"/>
+        <property key="usartc0io.outputfile" value=""/>
+        <property key="usartc0io.uartioenabled" value="false"/>
+        <property key="usartc1io.output" value="window"/>
+        <property key="usartc1io.outputfile" value=""/>
+        <property key="usartc1io.uartioenabled" value="false"/>
+        <property key="usartd0io.output" value="window"/>
+        <property key="usartd0io.outputfile" value=""/>
+        <property key="usartd0io.uartioenabled" value="false"/>
+        <property key="usartd1io.output" value="window"/>
+        <property key="usartd1io.outputfile" value=""/>
+        <property key="usartd1io.uartioenabled" value="false"/>
+        <property key="usarte0io.output" value="window"/>
+        <property key="usarte0io.outputfile" value=""/>
+        <property key="usarte0io.uartioenabled" value="false"/>
+        <property key="usarte1io.output" value="window"/>
+        <property key="usarte1io.outputfile" value=""/>
+        <property key="usarte1io.uartioenabled" value="false"/>
+        <property key="usarte2io.output" value="window"/>
+        <property key="usarte2io.outputfile" value=""/>
+        <property key="usarte2io.uartioenabled" value="false"/>
+        <property key="usartf0io.output" value="window"/>
+        <property key="usartf0io.outputfile" value=""/>
+        <property key="usartf0io.uartioenabled" value="false"/>
+        <property key="usartf1io.output" value="window"/>
+        <property key="usartf1io.outputfile" value=""/>
+        <property key="usartf1io.uartioenabled" value="false"/>
+        <property key="voltagevalue" value="3.25"/>
+        <property key="warningmessagebreakoptions.W0001_CORE_BITREV_MODULO_EN"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0002_CORE_SECURE_MEMORYACCESS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0003_CORE_SW_RESET" value="report"/>
+        <property key="warningmessagebreakoptions.W0004_CORE_WDT_RESET" value="report"/>
+        <property key="warningmessagebreakoptions.W0005_CORE_IOPUW_RESET"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0006_CORE_CODE_GUARD_PFC_RESET"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0007_CORE_DO_LOOP_STACK_UNDERFLOW"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0008_CORE_DO_LOOP_STACK_OVERFLOW"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0009_CORE_NESTED_DO_LOOP_RANGE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0010_CORE_SIM32_ODD_WORDACCESS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0011_CORE_SIM32_UNIMPLEMENTED_RAMACCESS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0012_CORE_STACK_OVERFLOW_RESET"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0013_CORE_STACK_UNDERFLOW_RESET"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0014_CORE_INVALID_OPCODE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0015_CORE_INVALID_ALT_WREG_SET"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0016_CORE_STACK_ERROR"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0017_CORE_ODD_RAMWORDACCESS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0018_CORE_UNIMPLEMENTED_RAMACCESS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0019_CORE_UNIMPLEMENTED_PROMACCESS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0020_CORE_ACCESS_NOTIN_X_SPACE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0021_CORE_ACCESS_NOTIN_Y_SPACE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0022_CORE_XMODEND_LESS_XMODSRT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0023_CORE_YMODEND_LESS_YMODSRT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0024_CORE_BITREV_MOD_IS_ZERO"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0025_CORE_HARD_TRAP" value="report"/>
+        <property key="warningmessagebreakoptions.W0026_CORE_UNIMPLEMENTED_MEMORYACCESS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0027_CORE_UNIMPLEMENTED_EDSACCESS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0028_TBLRD_WORM_CONFIG_MEMORY"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0029_TBLRD_DEVICE_ID" value="report"/>
+        <property key="warningmessagebreakoptions.W0030_CORE_UNIMPLEMENTED_MEMORY_ACCESS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0031_BSLIM_INSUFFICIENT_BOOT_SEGMENT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0032_BSLIM_LIMITS_EXCEEDS_PROG_MEMORY"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0033_CORE_UNPREDICTABLE_OPCODE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0034_CORE_UNALIGNED_MEMORY_ACCESS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0035_CORE_UNIMPLEMENTED_RAMACCESS_NOTRAP"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0036_UNIMPLEMENTED_INSTRUCTION"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0040_FPU_DIFF_CP10_CP11"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0041_FPU_ACCESS_DENIED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0042_FPU_PRIVILEGED_ACCESS_ONLY"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0043_FPU_CP_RESERVED_VALUE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0044_FPU_OUT_OF_RANGE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0051_INSTRUCTION_DIV_NOT_ENOUGH_REPEAT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0052_INSTRUCTION_DIV_TOO_MANY_REPEAT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0053_INVALID_INTCON_VS_FIELD_VALUE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0101_SIM_UPDATE_FAILED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0102_SIM_PERIPH_MISSING"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0103_SIM_PERIPH_FAILED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0104_SIM_FAILED_TO_INIT_TOOL"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0105_SIM_INVALID_FIELD"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0106_SIM_PERIPH_PARTIAL_SUPPORT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0107_SIM_NOT_SUPPORTED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0108_SIM_RESERVED_SETTING"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0109_SIM_PERIPHERAL_IN_DEVELOPMENT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0110_SIM_UNEXPECTED_EVENT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0111_SIM_UNSUPPORTED_SELECTION"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0112_SIM_INVALID_OPERATION"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0113_SIM_WRITE_TO_PROTECTED_SFR"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0114_SIM_INVALID_KEY" value="report"/>
+        <property key="warningmessagebreakoptions.W0115_SIM_FAILED_TO_PARSE_DEVICE_FILE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0116_SIM_STACK_OVERFLOW"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0117_SIM_STACK_UNDERFLOW"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0118_SIM_INVALID_FIELD_VALUE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0119_SIM_SAMPLING_RATE_VIOLATION"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0201_ADC_NO_STIMULUS_FILE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0202_ADC_GO_DONE_BIT" value="report"/>
+        <property key="warningmessagebreakoptions.W0203_ADC_MINIMUM_2_TAD"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0204_ADC_TAD_TOO_SMALL"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0205_ADC_UNEXPECTED_TRANSITION"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0206_ADC_SAMP_TIME_TOO_SHORT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0207_ADC_NO_PINS_SCANNED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0208_ADC_UNSUPPORTED_CLOCK_SOURCE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0209_ADC_ANALOG_CHANNEL_DIGITAL"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0210_ADC_ANALOG_CHANNEL_OUTPUT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0211_ADC_PIN_INVALID_CHANNEL"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0212_ADC_BAND_GAP_NOT_SUPPORTED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0213_ADC_RESERVED_SSRC"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0214_ADC_POSITIVE_INPUT_DIGITAL"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0215_ADC_POSITIVE_INPUT_OUTPUT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0216_ADC_NEGATIVE_INPUT_DIGITAL"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0217_ADC_NEGATIVE_INPUT_OUTPUT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0218_ADC_REFERENCE_HIGH_DIGITAL"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0219_ADC_REFERENCE_HIGH_OUTPUT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0220_ADC_REFERENCE_LOW_DIGITAL"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0221_ADC_REFERENCE_LOW_OUTPUT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0222_ADC_OVERFLOW" value="report"/>
+        <property key="warningmessagebreakoptions.W0223_ADC_UNDERFLOW" value="report"/>
+        <property key="warningmessagebreakoptions.W0224_ADC_CTMU_NOT_SUPPORTED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0225_ADC_INVALID_CH0S"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0226_ADC_VBAT_NOT_SUPPORTED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0227_ADC_INVALID_ADCS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0228_ADC_INVALID_ADCS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0229_ADC_INVALID_ADCS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0230_ADC_TRIGSEL_NOT_SUPPORTED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0231_ADC_NOT_WARMED" value="report"/>
+        <property key="warningmessagebreakoptions.W0232_ADC_CALIBRATION_ABORTED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0233_ADC_CORE_POWERED_EARLY"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0234_ADC_ALREADY_CALIBRATING"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0235_ADC_CAL_TYPE_CHANGED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0236_ADC_CAL_INVALIDATED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0237_ADC_UNKNOWN_DATASHEET"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0238_ADC_INVALID_SFR_FIELD_VALUE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0239_ADC_UNSUPPORTED_INPUT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0240_ADC_NOT_CALIBRATED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0241_ADC_FRACTIONAL_NOT_ALLOWED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0242_ADC_BG_INT_BEFORE_PWR"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0243_ADC_INVALID_TAD" value="report"/>
+        <property key="warningmessagebreakoptions.W0244_ADC_CONVERSION_ABORTED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0245_ADC_BUFREGEN_NOT_ALLOWED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0246_ADC_ACCUMULATION_BAD_RESSEL"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0247_ADC_CONVERSION_BAD_RESSEL"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0300_NVM_WR_BEFORE_KEY_SEQ"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0400_PWM_PWM_FASTER_THAN_FOSC"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0600_WDT_2ND_WDT_MR_WRITE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0601_WDT_EXPIRED" value="report"/>
+        <property key="warningmessagebreakoptions.W0601_WDT_RESET_OUTSIDE_WINDOW"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0700_CLC_GENERAL_WARNING"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0701_CLC_CLCOUT_AS_INPUT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0702_CLC_CIRCULAR_LOOP"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0800_ACC_INPUT_INVALID_CONFIG"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0801_ACC_INPUT_NOT_SUPPORTED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0802_ACC_INVERTED_WINDOW_LIMITS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0803_ACC_MISMATCHED_POS_INPUTS"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0804_ACC_WINDOW_COMP_DISABLED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0805_ACC_WINDOW_COMPS_MODES"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W0806_ACC_FEATURE_NOT_SUPPORTED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W10001_RESERVED_IRQ_HANDLER_INVOKED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W10002_UNSUPPORTED_CLK_SOURCE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W10101_UNSUPPORTED_CHANNEL_MODE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W10102_UNSUPPORTED_CLK_SOURCE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W10103_UNSUPPORTED_RECEIVER_FILTER"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W10301_NO_PORT_PINS_FOUND"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W10500_UNSUPPORTED_SOURCE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W1201_DATAFLASH_MEM_OUTSIDE_RANGE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W1202_DATAFLASH_ERASE_WHILE_LOCKED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W1203_DATAFLASH_WRITE_WHILE_LOCKED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W1401_DMA_PERIPH_NOT_AVAIL"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W1402_DMA_INVALID_IRQ" value="report"/>
+        <property key="warningmessagebreakoptions.W1403_DMA_INVALID_SFR" value="report"/>
+        <property key="warningmessagebreakoptions.W1404_DMA_INVALID_DMA_ADDR"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W1405_DMA_IRQ_DIR_MISMATCH"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W1600_PPS_INVALID_MAP" value="report"/>
+        <property key="warningmessagebreakoptions.W1601_PPS_INVALID_PIN_DESCRIPTION"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W1800_PWM_TIMER_SELECTION_NOT_AVIALABLE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W1801_PWM_TIMER_SELECTION_BAD_CLOCK_INPUT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W1802_PWM_TIMER_MISSING_PERSCALER_INFO"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W2001_INPUTCAPTURE_TMR3_UNAVAILABLE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W2002_INPUTCAPTURE_CAPTURE_EMPTY"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W2003_INPUTCAPTURE_SYNCSEL_NOT_AVIALABLE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W2004_INPUTCAPTURE_BAD_SYNC_SOURCE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W2501_OUTPUTCOMPARE_SYNCSEL_NOT_AVIALABLE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W2502_OUTPUTCOMPARE_BAD_SYNC_SOURCE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W2503_OUTPUTCOMPARE_BAD_TRIGGER_SOURCE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W2700_MPU_ILLEGAL_DREGION"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W2701_MPU_INVALID_REGION"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W3000_LPM_READ_PROTECTION_SECTION"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W3010_SPM_WRITE_PROTECTION_SECTION"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W6001_RTT_FORBIDDEN_RTPRES"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W6002_RTT_BAD_WRITING_ALMV"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W6003_RTT_BAD_WRITING_RTPRES"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W7001_SMT_CLK_SELECTION_NOT_SUPPORT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W7002_SMT_SIG_SELECTION_NOT_SUPPORT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W7003_SMT_WIN_SELECTION_NOT_SUPPORT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W8001_OSC_INVALID_CLOCK_SOURCE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W8002_OSC_RESERVED_FEXTOSC"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9001_TMR_GATE_AND_EXTCLOCK_ENABLED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9002_TMR_NO_PIN_AVAILABLE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9003_TMR_INVALID_CLOCK_SOURCE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9201_UART_TX_OVERFLOW"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9202_UART_TX_CAPTUREFILE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9203_UART_TX_INVALIDINTERRUPTMODE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9204_UART_RX_EMPTY_QUEUE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9205_UART_TX_BADFILE" value="report"/>
+        <property key="warningmessagebreakoptions.W9206_UART_RESERVED_MODE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9207_UART_UNABLETOCLOSE_FILE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9401_CVREF_INVALIDSOURCESELECTION"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9402_CVREF_INPUT_OUTPUTPINCONFLICT"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9601_COMP_FVR_SOURCE_UNAVAILABLE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9602_COMP_DAC_SOURCE_UNAVAILABLE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9603_COMP_CVREF_SOURCE_UNAVAILABLE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9604_COMP_SLOPE_SOURCE_UNAVAILABLE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9605_COMP_PRG_SOURCE_UNAVAILABLE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9607_COMP_DGTL_FLTR_OPTION_UNAVAILABLE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9609_COMP_DGTL_FLTR_CLK_UNAVAILABLE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9801_FVR_INVALID_MODE_SELECTION"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9801_SCL_BAD_SUBTYPE_INDICATION"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9802_SCL_FILE_NOT_FOUND"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9803_SCL_FAILED_TO_READ_FILE"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9804_SCL_UNRECOGNIZED_LABEL"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9805_SCL_UNRECOGNIZED_VAR"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9901_RTSP_INVALID_OPERATION_SELECTION"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.W9902_RTSP_FLASH_PROGRAM_WRITE_PROTECTED"
+                  value="report"/>
+        <property key="warningmessagebreakoptions.displaywarningmessagesoption"
+                  value=""/>
+        <property key="warningmessagebreakoptions.warningmessages" value="holdstate"/>
+        <property key="冻结所有其他外设" value="true"/>
+        <property key="安全段。分部编程" value="FullChipProgramming"/>
+      </Tool>
+    </conf>
+  </confs>
+</configurationDescriptor>

WZYX_UART_V1.1250726.X/WZYX_UART_V1.1250726.X/nbproject/private/configurations.xml

@@ -0,0 +1,25 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<configurationDescriptor version="65">
+  <projectmakefile>Makefile</projectmakefile>
+  <defaultConf>0</defaultConf>
+  <confs>
+    <conf name="default" type="2">
+      <platformToolSN>:=MPLABComm-USB-Microchip:=&lt;vid>04D8:=&lt;pid>900A:=&lt;rev>0002:=&lt;man>Microchip Technology Inc.:=&lt;prod>PICkit 3:=&lt;sn>DEFAULT_PK3 :=&lt;drv>x:=&lt;xpt>h:=end</platformToolSN>
+      <languageToolchainDir>D:\Program Files\Microchip\xc16\v2.10\bin</languageToolchainDir>
+      <mdbdebugger version="1">
+        <placeholder1>place holder 1</placeholder1>
+        <placeholder2>place holder 2</placeholder2>
+      </mdbdebugger>
+      <runprofile version="6">
+        <args></args>
+        <rundir></rundir>
+        <buildfirst>true</buildfirst>
+        <console-type>0</console-type>
+        <terminal-type>0</terminal-type>
+        <remove-instrumentation>0</remove-instrumentation>
+        <environment>
+        </environment>
+      </runprofile>
+    </conf>
+  </confs>
+</configurationDescriptor>

WZYX_UART_V1.1250726.X/WZYX_UART_V1.1250726.X/nbproject/private/private.xml

@@ -0,0 +1,13 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<project-private xmlns="http://www.netbeans.org/ns/project-private/1">
+    <editor-bookmarks xmlns="http://www.netbeans.org/ns/editor-bookmarks/2" lastBookmarkId="0"/>
+    <open-files xmlns="http://www.netbeans.org/ns/projectui-open-files/2">
+        <group name="source">
+            <file>file:/F:/library/source/WZYX_UART_V1.1250726.X/WZYX_UART_V1.1250726.X/Pin.c</file>
+        </group>
+        <group>
+            <file>file:/F:/library/source/WZYX_UART_V1.1250726.X/WZYX_UART_V1.1250726.X/main.c</file>
+            <file>file:/F:/library/source/WZYX_UART_V1.1250726.X/WZYX_UART_V1.1250726.X/Uart.c</file>
+        </group>
+    </open-files>
+</project-private>

WZYX_UART_V1.1250726.X/WZYX_UART_V1.1250726.X/nbproject/project.xml

@@ -0,0 +1,30 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<project xmlns="http://www.netbeans.org/ns/project/1">
+    <type>com.microchip.mplab.nbide.embedded.makeproject</type>
+    <configuration>
+        <data xmlns="http://www.netbeans.org/ns/make-project/1">
+            <name>WZYX_UART_V1.1250726</name>
+            <creation-uuid>2d5cad0a-a674-4c9f-9916-b3f885c93731</creation-uuid>
+            <make-project-type>0</make-project-type>
+            <sourceEncoding>GB2312</sourceEncoding>
+            <c-extensions>c</c-extensions>
+            <cpp-extensions/>
+            <header-extensions>h</header-extensions>
+            <asminc-extensions/>
+            <make-dep-projects/>
+            <sourceRootList>
+                <sourceRootElem>.</sourceRootElem>
+                <sourceRootElem>../../../../../11. N8/01.Code/current/N8_PCR_N1.20230213/NQ8QPCR_NO2.20230823.X/file</sourceRootElem>
+            </sourceRootList>
+            <confList>
+                <confElem>
+                    <name>default</name>
+                    <type>2</type>
+                </confElem>
+            </confList>
+            <formatting>
+                <project-formatting-style>false</project-formatting-style>
+            </formatting>
+        </data>
+    </configuration>
+</project>