DMA beif

WZYXHT_V1.12507260002.X/WZYXHT_V1.12507260002.X/Makefile

@@ -1,113 +0,0 @@
-#
-#  There exist several targets which are by default empty and which can be 
-#  used for execution of your targets. These targets are usually executed 
-#  before and after some main targets. They are: 
-#
-#     .build-pre:              called before 'build' target
-#     .build-post:             called after 'build' target
-#     .clean-pre:              called before 'clean' target
-#     .clean-post:             called after 'clean' target
-#     .clobber-pre:            called before 'clobber' target
-#     .clobber-post:           called after 'clobber' target
-#     .all-pre:                called before 'all' target
-#     .all-post:               called after 'all' target
-#     .help-pre:               called before 'help' target
-#     .help-post:              called after 'help' target
-#
-#  Targets beginning with '.' are not intended to be called on their own.
-#
-#  Main targets can be executed directly, and they are:
-#  
-#     build                    build a specific configuration
-#     clean                    remove built files from a configuration
-#     clobber                  remove all built files
-#     all                      build all configurations
-#     help                     print help mesage
-#  
-#  Targets .build-impl, .clean-impl, .clobber-impl, .all-impl, and
-#  .help-impl are implemented in nbproject/makefile-impl.mk.
-#
-#  Available make variables:
-#
-#     CND_BASEDIR                base directory for relative paths
-#     CND_DISTDIR                default top distribution directory (build artifacts)
-#     CND_BUILDDIR               default top build directory (object files, ...)
-#     CONF                       name of current configuration
-#     CND_ARTIFACT_DIR_${CONF}   directory of build artifact (current configuration)
-#     CND_ARTIFACT_NAME_${CONF}  name of build artifact (current configuration)
-#     CND_ARTIFACT_PATH_${CONF}  path to build artifact (current configuration)
-#     CND_PACKAGE_DIR_${CONF}    directory of package (current configuration)
-#     CND_PACKAGE_NAME_${CONF}   name of package (current configuration)
-#     CND_PACKAGE_PATH_${CONF}   path to package (current configuration)
-#
-# NOCDDL
-
-
-# Environment 
-MKDIR=mkdir
-CP=cp
-CCADMIN=CCadmin
-RANLIB=ranlib
-
-
-# build
-build: .build-post
-
-.build-pre:
-# Add your pre 'build' code here...
-
-.build-post: .build-impl
-# Add your post 'build' code here...
-
-
-# clean
-clean: .clean-post
-
-.clean-pre:
-# Add your pre 'clean' code here...
-# WARNING: the IDE does not call this target since it takes a long time to
-# simply run make. Instead, the IDE removes the configuration directories
-# under build and dist directly without calling make.
-# This target is left here so people can do a clean when running a clean
-# outside the IDE.
-
-.clean-post: .clean-impl
-# Add your post 'clean' code here...
-
-
-# clobber
-clobber: .clobber-post
-
-.clobber-pre:
-# Add your pre 'clobber' code here...
-
-.clobber-post: .clobber-impl
-# Add your post 'clobber' code here...
-
-
-# all
-all: .all-post
-
-.all-pre:
-# Add your pre 'all' code here...
-
-.all-post: .all-impl
-# Add your post 'all' code here...
-
-
-# help
-help: .help-post
-
-.help-pre:
-# Add your pre 'help' code here...
-
-.help-post: .help-impl
-# Add your post 'help' code here...
-
-
-
-# include project implementation makefile
-include nbproject/Makefile-impl.mk
-
-# include project make variables
-include nbproject/Makefile-variables.mk

WZYXHT_V1.12507260002.X/WZYXHT_V1.12507260002.X/nbproject/Makefile-default.mk

@@ -1,309 +0,0 @@
-#
-# Generated Makefile - do not edit!
-#
-# Edit the Makefile in the project folder instead (../Makefile). Each target
-# has a -pre and a -post target defined where you can add customized code.
-#
-# This makefile implements configuration specific macros and targets.
-
-
-# Include project Makefile
-ifeq "${IGNORE_LOCAL}" "TRUE"
-# do not include local makefile. User is passing all local related variables already
-else
-include Makefile
-# Include makefile containing local settings
-ifeq "$(wildcard nbproject/Makefile-local-default.mk)" "nbproject/Makefile-local-default.mk"
-include nbproject/Makefile-local-default.mk
-endif
-endif
-
-# Environment
-MKDIR=gnumkdir -p
-RM=rm -f 
-MV=mv 
-CP=cp 
-
-# Macros
-CND_CONF=default
-ifeq ($(TYPE_IMAGE), DEBUG_RUN)
-IMAGE_TYPE=debug
-OUTPUT_SUFFIX=elf
-DEBUGGABLE_SUFFIX=elf
-FINAL_IMAGE=${DISTDIR}/WZYXHT_V1.12507260002.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}
-else
-IMAGE_TYPE=production
-OUTPUT_SUFFIX=hex
-DEBUGGABLE_SUFFIX=elf
-FINAL_IMAGE=${DISTDIR}/WZYXHT_V1.12507260002.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}
-endif
-
-ifeq ($(COMPARE_BUILD), true)
-COMPARISON_BUILD=-mafrlcsj
-else
-COMPARISON_BUILD=
-endif
-
-# Object Directory
-OBJECTDIR=build/${CND_CONF}/${IMAGE_TYPE}
-
-# Distribution Directory
-DISTDIR=dist/${CND_CONF}/${IMAGE_TYPE}
-
-# Source Files Quoted if spaced
-SOURCEFILES_QUOTED_IF_SPACED=main.c ADC.c command.c Delay.c EEPROM.c Instrument_EEPROM_Param.c Interrupt.c IO.c Motor.c PWM.c system.c Temperature_Control.c Timer.c Uart.c
-
-# Object Files Quoted if spaced
-OBJECTFILES_QUOTED_IF_SPACED=${OBJECTDIR}/main.o ${OBJECTDIR}/ADC.o ${OBJECTDIR}/command.o ${OBJECTDIR}/Delay.o ${OBJECTDIR}/EEPROM.o ${OBJECTDIR}/Instrument_EEPROM_Param.o ${OBJECTDIR}/Interrupt.o ${OBJECTDIR}/IO.o ${OBJECTDIR}/Motor.o ${OBJECTDIR}/PWM.o ${OBJECTDIR}/system.o ${OBJECTDIR}/Temperature_Control.o ${OBJECTDIR}/Timer.o ${OBJECTDIR}/Uart.o
-POSSIBLE_DEPFILES=${OBJECTDIR}/main.o.d ${OBJECTDIR}/ADC.o.d ${OBJECTDIR}/command.o.d ${OBJECTDIR}/Delay.o.d ${OBJECTDIR}/EEPROM.o.d ${OBJECTDIR}/Instrument_EEPROM_Param.o.d ${OBJECTDIR}/Interrupt.o.d ${OBJECTDIR}/IO.o.d ${OBJECTDIR}/Motor.o.d ${OBJECTDIR}/PWM.o.d ${OBJECTDIR}/system.o.d ${OBJECTDIR}/Temperature_Control.o.d ${OBJECTDIR}/Timer.o.d ${OBJECTDIR}/Uart.o.d
-
-# Object Files
-OBJECTFILES=${OBJECTDIR}/main.o ${OBJECTDIR}/ADC.o ${OBJECTDIR}/command.o ${OBJECTDIR}/Delay.o ${OBJECTDIR}/EEPROM.o ${OBJECTDIR}/Instrument_EEPROM_Param.o ${OBJECTDIR}/Interrupt.o ${OBJECTDIR}/IO.o ${OBJECTDIR}/Motor.o ${OBJECTDIR}/PWM.o ${OBJECTDIR}/system.o ${OBJECTDIR}/Temperature_Control.o ${OBJECTDIR}/Timer.o ${OBJECTDIR}/Uart.o
-
-# Source Files
-SOURCEFILES=main.c ADC.c command.c Delay.c EEPROM.c Instrument_EEPROM_Param.c Interrupt.c IO.c Motor.c PWM.c system.c Temperature_Control.c Timer.c Uart.c
-
-
-
-CFLAGS=
-ASFLAGS=
-LDLIBSOPTIONS=
-
-############# Tool locations ##########################################
-# If you copy a project from one host to another, the path where the  #
-# compiler is installed may be different.                             #
-# If you open this project with MPLAB X in the new host, this         #
-# makefile will be regenerated and the paths will be corrected.       #
-#######################################################################
-# fixDeps replaces a bunch of sed/cat/printf statements that slow down the build
-FIXDEPS=fixDeps
-
-.build-conf:  ${BUILD_SUBPROJECTS}
-ifneq ($(INFORMATION_MESSAGE), )
-	@echo $(INFORMATION_MESSAGE)
-endif
-	${MAKE}  -f nbproject/Makefile-default.mk ${DISTDIR}/WZYXHT_V1.12507260002.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}
-
-MP_PROCESSOR_OPTION=33FJ64MC204
-MP_LINKER_FILE_OPTION=,--script=p33FJ64MC204.gld
-# ------------------------------------------------------------------------------------
-# Rules for buildStep: compile
-ifeq ($(TYPE_IMAGE), DEBUG_RUN)
-${OBJECTDIR}/main.o: main.c  .generated_files/flags/default/36435cc9f9630a870ef9d02e9b4a5b612d88c342 .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}" 
-	@${RM} ${OBJECTDIR}/main.o.d 
-	@${RM} ${OBJECTDIR}/main.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  main.c  -o ${OBJECTDIR}/main.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/main.o.d"      -g -D__DEBUG -D__MPLAB_DEBUGGER_PK3=1    -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-${OBJECTDIR}/ADC.o: ADC.c  .generated_files/flags/default/22d00054b0e941c887aa706505fc21e2f8358e9a .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}" 
-	@${RM} ${OBJECTDIR}/ADC.o.d 
-	@${RM} ${OBJECTDIR}/ADC.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  ADC.c  -o ${OBJECTDIR}/ADC.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/ADC.o.d"      -g -D__DEBUG -D__MPLAB_DEBUGGER_PK3=1    -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-${OBJECTDIR}/command.o: command.c  .generated_files/flags/default/9d65c18a712065d6e7eb31356ef3928904bacaeb .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}" 
-	@${RM} ${OBJECTDIR}/command.o.d 
-	@${RM} ${OBJECTDIR}/command.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  command.c  -o ${OBJECTDIR}/command.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/command.o.d"      -g -D__DEBUG -D__MPLAB_DEBUGGER_PK3=1    -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-${OBJECTDIR}/Delay.o: Delay.c  .generated_files/flags/default/9bf06658ffae01b8a83ac850380fcf75dae5a59 .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}" 
-	@${RM} ${OBJECTDIR}/Delay.o.d 
-	@${RM} ${OBJECTDIR}/Delay.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  Delay.c  -o ${OBJECTDIR}/Delay.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/Delay.o.d"      -g -D__DEBUG -D__MPLAB_DEBUGGER_PK3=1    -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-${OBJECTDIR}/EEPROM.o: EEPROM.c  .generated_files/flags/default/73a946b07caafdbb7abc1625e5d155818648ea91 .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}" 
-	@${RM} ${OBJECTDIR}/EEPROM.o.d 
-	@${RM} ${OBJECTDIR}/EEPROM.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  EEPROM.c  -o ${OBJECTDIR}/EEPROM.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/EEPROM.o.d"      -g -D__DEBUG -D__MPLAB_DEBUGGER_PK3=1    -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-${OBJECTDIR}/Instrument_EEPROM_Param.o: Instrument_EEPROM_Param.c  .generated_files/flags/default/a9edb79f62df5c7e54b3ab05e43bbfbc45afbed6 .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}" 
-	@${RM} ${OBJECTDIR}/Instrument_EEPROM_Param.o.d 
-	@${RM} ${OBJECTDIR}/Instrument_EEPROM_Param.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  Instrument_EEPROM_Param.c  -o ${OBJECTDIR}/Instrument_EEPROM_Param.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/Instrument_EEPROM_Param.o.d"      -g -D__DEBUG -D__MPLAB_DEBUGGER_PK3=1    -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-${OBJECTDIR}/Interrupt.o: Interrupt.c  .generated_files/flags/default/2ac247f6c2b7e8212e0e9c8d90847d7b5f00a84 .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}" 
-	@${RM} ${OBJECTDIR}/Interrupt.o.d 
-	@${RM} ${OBJECTDIR}/Interrupt.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  Interrupt.c  -o ${OBJECTDIR}/Interrupt.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/Interrupt.o.d"      -g -D__DEBUG -D__MPLAB_DEBUGGER_PK3=1    -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-${OBJECTDIR}/IO.o: IO.c  .generated_files/flags/default/5bb5800628d3f70de6b47074d7d662bfeb62c82d .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}" 
-	@${RM} ${OBJECTDIR}/IO.o.d 
-	@${RM} ${OBJECTDIR}/IO.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  IO.c  -o ${OBJECTDIR}/IO.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/IO.o.d"      -g -D__DEBUG -D__MPLAB_DEBUGGER_PK3=1    -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-${OBJECTDIR}/Motor.o: Motor.c  .generated_files/flags/default/26b43c698350744390d08f373f8bd8560f5d2c2c .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}" 
-	@${RM} ${OBJECTDIR}/Motor.o.d 
-	@${RM} ${OBJECTDIR}/Motor.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  Motor.c  -o ${OBJECTDIR}/Motor.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/Motor.o.d"      -g -D__DEBUG -D__MPLAB_DEBUGGER_PK3=1    -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-${OBJECTDIR}/PWM.o: PWM.c  .generated_files/flags/default/3eccf8c9b89f90967344a715df18517fafc3a9f5 .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}" 
-	@${RM} ${OBJECTDIR}/PWM.o.d 
-	@${RM} ${OBJECTDIR}/PWM.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  PWM.c  -o ${OBJECTDIR}/PWM.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/PWM.o.d"      -g -D__DEBUG -D__MPLAB_DEBUGGER_PK3=1    -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-${OBJECTDIR}/system.o: system.c  .generated_files/flags/default/8e00794b88ca9ae2f8df32ff793ae67e41ae479f .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}" 
-	@${RM} ${OBJECTDIR}/system.o.d 
-	@${RM} ${OBJECTDIR}/system.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  system.c  -o ${OBJECTDIR}/system.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/system.o.d"      -g -D__DEBUG -D__MPLAB_DEBUGGER_PK3=1    -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-${OBJECTDIR}/Temperature_Control.o: Temperature_Control.c  .generated_files/flags/default/703f2599d0aa79431a7ffbff53a487e82ee0facc .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}" 
-	@${RM} ${OBJECTDIR}/Temperature_Control.o.d 
-	@${RM} ${OBJECTDIR}/Temperature_Control.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  Temperature_Control.c  -o ${OBJECTDIR}/Temperature_Control.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/Temperature_Control.o.d"      -g -D__DEBUG -D__MPLAB_DEBUGGER_PK3=1    -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-${OBJECTDIR}/Timer.o: Timer.c  .generated_files/flags/default/e93a069211a91c72bbb11822c5fea95864d05b91 .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}" 
-	@${RM} ${OBJECTDIR}/Timer.o.d 
-	@${RM} ${OBJECTDIR}/Timer.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  Timer.c  -o ${OBJECTDIR}/Timer.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/Timer.o.d"      -g -D__DEBUG -D__MPLAB_DEBUGGER_PK3=1    -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-${OBJECTDIR}/Uart.o: Uart.c  .generated_files/flags/default/3da18ce1c015015655f4b202ddc887539ec500fd .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}" 
-	@${RM} ${OBJECTDIR}/Uart.o.d 
-	@${RM} ${OBJECTDIR}/Uart.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  Uart.c  -o ${OBJECTDIR}/Uart.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/Uart.o.d"      -g -D__DEBUG -D__MPLAB_DEBUGGER_PK3=1    -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-else
-${OBJECTDIR}/main.o: main.c  .generated_files/flags/default/d4f6048a3d3c12c469a46c5f7b35c8ec49d1fe30 .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}" 
-	@${RM} ${OBJECTDIR}/main.o.d 
-	@${RM} ${OBJECTDIR}/main.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  main.c  -o ${OBJECTDIR}/main.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/main.o.d"        -g -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-${OBJECTDIR}/ADC.o: ADC.c  .generated_files/flags/default/22057ccff77115b2fc5505041dac5b287868351f .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}" 
-	@${RM} ${OBJECTDIR}/ADC.o.d 
-	@${RM} ${OBJECTDIR}/ADC.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  ADC.c  -o ${OBJECTDIR}/ADC.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/ADC.o.d"        -g -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-${OBJECTDIR}/command.o: command.c  .generated_files/flags/default/2ff6886b41b0cf2b6f4cbc37f9179f909d242751 .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}" 
-	@${RM} ${OBJECTDIR}/command.o.d 
-	@${RM} ${OBJECTDIR}/command.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  command.c  -o ${OBJECTDIR}/command.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/command.o.d"        -g -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-${OBJECTDIR}/Delay.o: Delay.c  .generated_files/flags/default/6ec39116cc1113dd71c95f8b6bf26e16c59ca840 .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}" 
-	@${RM} ${OBJECTDIR}/Delay.o.d 
-	@${RM} ${OBJECTDIR}/Delay.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  Delay.c  -o ${OBJECTDIR}/Delay.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/Delay.o.d"        -g -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-${OBJECTDIR}/EEPROM.o: EEPROM.c  .generated_files/flags/default/684d8c696179608ad9ac6f7387076f4c030f263a .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}" 
-	@${RM} ${OBJECTDIR}/EEPROM.o.d 
-	@${RM} ${OBJECTDIR}/EEPROM.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  EEPROM.c  -o ${OBJECTDIR}/EEPROM.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/EEPROM.o.d"        -g -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-${OBJECTDIR}/Instrument_EEPROM_Param.o: Instrument_EEPROM_Param.c  .generated_files/flags/default/fb1b7c3f1471b3b8c9f5175f6816073dbe0d51a8 .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}" 
-	@${RM} ${OBJECTDIR}/Instrument_EEPROM_Param.o.d 
-	@${RM} ${OBJECTDIR}/Instrument_EEPROM_Param.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  Instrument_EEPROM_Param.c  -o ${OBJECTDIR}/Instrument_EEPROM_Param.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/Instrument_EEPROM_Param.o.d"        -g -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-${OBJECTDIR}/Interrupt.o: Interrupt.c  .generated_files/flags/default/5305913b7ffbb4f685f85debc78b08c93c406b98 .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}" 
-	@${RM} ${OBJECTDIR}/Interrupt.o.d 
-	@${RM} ${OBJECTDIR}/Interrupt.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  Interrupt.c  -o ${OBJECTDIR}/Interrupt.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/Interrupt.o.d"        -g -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-${OBJECTDIR}/IO.o: IO.c  .generated_files/flags/default/9594b61679c8ad47424ba5853e3abf6fa25ce0a5 .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}" 
-	@${RM} ${OBJECTDIR}/IO.o.d 
-	@${RM} ${OBJECTDIR}/IO.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  IO.c  -o ${OBJECTDIR}/IO.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/IO.o.d"        -g -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-${OBJECTDIR}/Motor.o: Motor.c  .generated_files/flags/default/39bf790a3435af6cb375ddbcf8a6bbf56ef1a908 .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}" 
-	@${RM} ${OBJECTDIR}/Motor.o.d 
-	@${RM} ${OBJECTDIR}/Motor.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  Motor.c  -o ${OBJECTDIR}/Motor.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/Motor.o.d"        -g -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-${OBJECTDIR}/PWM.o: PWM.c  .generated_files/flags/default/1bcf8f21bcf5e0b91160032ab346138a6d9b643c .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}" 
-	@${RM} ${OBJECTDIR}/PWM.o.d 
-	@${RM} ${OBJECTDIR}/PWM.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  PWM.c  -o ${OBJECTDIR}/PWM.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/PWM.o.d"        -g -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-${OBJECTDIR}/system.o: system.c  .generated_files/flags/default/43f505c4f709a5410e1542b227d5eb01da64915a .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}" 
-	@${RM} ${OBJECTDIR}/system.o.d 
-	@${RM} ${OBJECTDIR}/system.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  system.c  -o ${OBJECTDIR}/system.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/system.o.d"        -g -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-${OBJECTDIR}/Temperature_Control.o: Temperature_Control.c  .generated_files/flags/default/df611787dae058846d64f0502ec6b3012090ca5e .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}" 
-	@${RM} ${OBJECTDIR}/Temperature_Control.o.d 
-	@${RM} ${OBJECTDIR}/Temperature_Control.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  Temperature_Control.c  -o ${OBJECTDIR}/Temperature_Control.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/Temperature_Control.o.d"        -g -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-${OBJECTDIR}/Timer.o: Timer.c  .generated_files/flags/default/82c4ed328f5dee4945937f8f219f08ea2a69d3d4 .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}" 
-	@${RM} ${OBJECTDIR}/Timer.o.d 
-	@${RM} ${OBJECTDIR}/Timer.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  Timer.c  -o ${OBJECTDIR}/Timer.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/Timer.o.d"        -g -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-${OBJECTDIR}/Uart.o: Uart.c  .generated_files/flags/default/189f6e9b856da5593a56c84ed4aa2027669df70c .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}" 
-	@${RM} ${OBJECTDIR}/Uart.o.d 
-	@${RM} ${OBJECTDIR}/Uart.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  Uart.c  -o ${OBJECTDIR}/Uart.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/Uart.o.d"        -g -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-endif
-
-# ------------------------------------------------------------------------------------
-# Rules for buildStep: assemble
-ifeq ($(TYPE_IMAGE), DEBUG_RUN)
-else
-endif
-
-# ------------------------------------------------------------------------------------
-# Rules for buildStep: assemblePreproc
-ifeq ($(TYPE_IMAGE), DEBUG_RUN)
-else
-endif
-
-# ------------------------------------------------------------------------------------
-# Rules for buildStep: link
-ifeq ($(TYPE_IMAGE), DEBUG_RUN)
-${DISTDIR}/WZYXHT_V1.12507260002.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}: ${OBJECTFILES}  nbproject/Makefile-${CND_CONF}.mk    
-	@${MKDIR} ${DISTDIR} 
-	${MP_CC} $(MP_EXTRA_LD_PRE)  -o ${DISTDIR}/WZYXHT_V1.12507260002.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}  ${OBJECTFILES_QUOTED_IF_SPACED}      -mcpu=$(MP_PROCESSOR_OPTION)        -D__DEBUG=__DEBUG -D__MPLAB_DEBUGGER_PK3=1  -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)   -mreserve=data@0x800:0x81F -mreserve=data@0x820:0x821 -mreserve=data@0x822:0x823 -mreserve=data@0x824:0x825 -mreserve=data@0x826:0x84F   -Wl,,,--defsym=__MPLAB_BUILD=1,--defsym=__MPLAB_DEBUG=1,--defsym=__DEBUG=1,-D__DEBUG=__DEBUG,--defsym=__MPLAB_DEBUGGER_PK3=1,$(MP_LINKER_FILE_OPTION),--stack=16,--check-sections,--data-init,--pack-data,--handles,--isr,--no-gc-sections,--fill-upper=0,--stackguard=16,--no-force-link,--smart-io,-Map="${DISTDIR}/${PROJECTNAME}.${IMAGE_TYPE}.map",--report-mem,--memorysummary,${DISTDIR}/memoryfile.xml$(MP_EXTRA_LD_POST)  
-	
-else
-${DISTDIR}/WZYXHT_V1.12507260002.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}: ${OBJECTFILES}  nbproject/Makefile-${CND_CONF}.mk   
-	@${MKDIR} ${DISTDIR} 
-	${MP_CC} $(MP_EXTRA_LD_PRE)  -o ${DISTDIR}/WZYXHT_V1.12507260002.X.${IMAGE_TYPE}.${DEBUGGABLE_SUFFIX}  ${OBJECTFILES_QUOTED_IF_SPACED}      -mcpu=$(MP_PROCESSOR_OPTION)        -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -Wl,,,--defsym=__MPLAB_BUILD=1,$(MP_LINKER_FILE_OPTION),--stack=16,--check-sections,--data-init,--pack-data,--handles,--isr,--no-gc-sections,--fill-upper=0,--stackguard=16,--no-force-link,--smart-io,-Map="${DISTDIR}/${PROJECTNAME}.${IMAGE_TYPE}.map",--report-mem,--memorysummary,${DISTDIR}/memoryfile.xml$(MP_EXTRA_LD_POST)  
-	${MP_CC_DIR}\\xc16-bin2hex ${DISTDIR}/WZYXHT_V1.12507260002.X.${IMAGE_TYPE}.${DEBUGGABLE_SUFFIX} -a  -omf=elf   
-	
-endif
-
-
-# Subprojects
-.build-subprojects:
-
-
-# Subprojects
-.clean-subprojects:
-
-# Clean Targets
-.clean-conf: ${CLEAN_SUBPROJECTS}
-	${RM} -r ${OBJECTDIR}
-	${RM} -r ${DISTDIR}
-
-# Enable dependency checking
-.dep.inc: .depcheck-impl
-
-DEPFILES=$(wildcard ${POSSIBLE_DEPFILES})
-ifneq (${DEPFILES},)
-include ${DEPFILES}
-endif

WZYXHT_V1.12507260002.X/WZYXHT_V1.12507260002.X/nbproject/Makefile-genesis.properties

@@ -1,13 +0,0 @@
-#
-#Mon Aug 04 13:25:12 CST 2025
-default.languagetoolchain.version=2.10
-default.Pack.dfplocation=
-conf.ids=default
-default.languagetoolchain.dir=C\:\\Program Files\\Microchip\\xc16\\v2.10\\bin
-host.id=1lj1-c7wd-qs
-configurations-xml=ed15cc36d40c270060cb3e593bb16a1c
-default.com-microchip-mplab-mdbcore-PICKit3Tool-PICkit3DbgToolManager.md5=50072f33d27b72924000ca2dca4b7622
-com-microchip-mplab-nbide-embedded-makeproject-MakeProject.md5=e62346c0c0ecee2637e613b49cb7b7fa
-proj.dir=F\:\\library\\source\\WZYXHT_V1.12507260002.X\\WZYXHT_V1.12507260002.X
-host.platform=windows
-default.com-microchip-mplab-nbide-toolchain-xc16-XC16LanguageToolchain.md5=07f7da95e66d00aa4668de5175f752c5

WZYXHT_V1.12507260002.X/WZYXHT_V1.12507260002.X/nbproject/Makefile-impl.mk

@@ -1,69 +0,0 @@
-#
-# Generated Makefile - do not edit!
-#
-# Edit the Makefile in the project folder instead (../Makefile). Each target
-# has a pre- and a post- target defined where you can add customization code.
-#
-# This makefile implements macros and targets common to all configurations.
-#
-# NOCDDL
-
-
-# Building and Cleaning subprojects are done by default, but can be controlled with the SUB
-# macro. If SUB=no, subprojects will not be built or cleaned. The following macro
-# statements set BUILD_SUB-CONF and CLEAN_SUB-CONF to .build-reqprojects-conf
-# and .clean-reqprojects-conf unless SUB has the value 'no'
-SUB_no=NO
-SUBPROJECTS=${SUB_${SUB}}
-BUILD_SUBPROJECTS_=.build-subprojects
-BUILD_SUBPROJECTS_NO=
-BUILD_SUBPROJECTS=${BUILD_SUBPROJECTS_${SUBPROJECTS}}
-CLEAN_SUBPROJECTS_=.clean-subprojects
-CLEAN_SUBPROJECTS_NO=
-CLEAN_SUBPROJECTS=${CLEAN_SUBPROJECTS_${SUBPROJECTS}}
-
-
-# Project Name
-PROJECTNAME=WZYXHT_V1.12507260002.X
-
-# Active Configuration
-DEFAULTCONF=default
-CONF=${DEFAULTCONF}
-
-# All Configurations
-ALLCONFS=default 
-
-
-# build
-.build-impl: .build-pre
-	${MAKE} -f nbproject/Makefile-${CONF}.mk SUBPROJECTS=${SUBPROJECTS} .build-conf
-
-
-# clean
-.clean-impl: .clean-pre
-	${MAKE} -f nbproject/Makefile-${CONF}.mk SUBPROJECTS=${SUBPROJECTS} .clean-conf
-
-# clobber
-.clobber-impl: .clobber-pre .depcheck-impl
-	    ${MAKE} SUBPROJECTS=${SUBPROJECTS} CONF=default clean
-
-
-
-# all
-.all-impl: .all-pre .depcheck-impl
-	    ${MAKE} SUBPROJECTS=${SUBPROJECTS} CONF=default build
-
-
-
-# dependency checking support
-.depcheck-impl:
-#	@echo "# This code depends on make tool being used" >.dep.inc
-#	@if [ -n "${MAKE_VERSION}" ]; then \
-#	    echo "DEPFILES=\$$(wildcard \$$(addsuffix .d, \$${OBJECTFILES}))" >>.dep.inc; \
-#	    echo "ifneq (\$${DEPFILES},)" >>.dep.inc; \
-#	    echo "include \$${DEPFILES}" >>.dep.inc; \
-#	    echo "endif" >>.dep.inc; \
-#	else \
-#	    echo ".KEEP_STATE:" >>.dep.inc; \
-#	    echo ".KEEP_STATE_FILE:.make.state.\$${CONF}" >>.dep.inc; \
-#	fi

WZYXHT_V1.12507260002.X/WZYXHT_V1.12507260002.X/nbproject/Makefile-local-default.mk

@@ -1,36 +0,0 @@
-#
-# Generated Makefile - do not edit!
-#
-#
-# This file contains information about the location of compilers and other tools.
-# If you commmit this file into your revision control server, you will be able to 
-# to checkout the project and build it from the command line with make. However,
-# if more than one person works on the same project, then this file might show
-# conflicts since different users are bound to have compilers in different places.
-# In that case you might choose to not commit this file and let MPLAB X recreate this file
-# for each user. The disadvantage of not commiting this file is that you must run MPLAB X at
-# least once so the file gets created and the project can be built. Finally, you can also
-# avoid using this file at all if you are only building from the command line with make.
-# You can invoke make with the values of the macros:
-# $ makeMP_CC="/opt/microchip/mplabc30/v3.30c/bin/pic30-gcc" ...  
-#
-SHELL=cmd.exe
-PATH_TO_IDE_BIN=C:/Program Files/Microchip/MPLABX/v6.15/mplab_platform/platform/../mplab_ide/modules/../../bin/
-# Adding MPLAB X bin directory to path.
-PATH:=C:/Program Files/Microchip/MPLABX/v6.15/mplab_platform/platform/../mplab_ide/modules/../../bin/:$(PATH)
-# Path to java used to run MPLAB X when this makefile was created
-MP_JAVA_PATH="C:\Program Files\Microchip\MPLABX\v6.15\sys\java\zulu8.64.0.19-ca-fx-jre8.0.345-win_x64/bin/"
-OS_CURRENT="$(shell uname -s)"
-MP_CC="C:\Program Files\Microchip\xc16\v2.10\bin\xc16-gcc.exe"
-# MP_CPPC is not defined
-# MP_BC is not defined
-MP_AS="C:\Program Files\Microchip\xc16\v2.10\bin\xc16-as.exe"
-MP_LD="C:\Program Files\Microchip\xc16\v2.10\bin\xc16-ld.exe"
-MP_AR="C:\Program Files\Microchip\xc16\v2.10\bin\xc16-ar.exe"
-DEP_GEN=${MP_JAVA_PATH}java -jar "C:/Program Files/Microchip/MPLABX/v6.15/mplab_platform/platform/../mplab_ide/modules/../../bin/extractobjectdependencies.jar"
-MP_CC_DIR="C:\Program Files\Microchip\xc16\v2.10\bin"
-# MP_CPPC_DIR is not defined
-# MP_BC_DIR is not defined
-MP_AS_DIR="C:\Program Files\Microchip\xc16\v2.10\bin"
-MP_LD_DIR="C:\Program Files\Microchip\xc16\v2.10\bin"
-MP_AR_DIR="C:\Program Files\Microchip\xc16\v2.10\bin"

WZYXHT_V1.12507260002.X/WZYXHT_V1.12507260002.X/nbproject/Makefile-variables.mk

@@ -1,10 +0,0 @@
-#
-# Generated - do not edit!
-#
-# NOCDDL
-#
-CND_BASEDIR=`pwd`
-# default configuration
-CND_ARTIFACT_DIR_default=dist/default/production
-CND_ARTIFACT_NAME_default=WZYXHT_V1.12507260002.X.production.hex
-CND_ARTIFACT_PATH_default=dist/default/production/WZYXHT_V1.12507260002.X.production.hex

WZYXHT_V1.12507260002.X/WZYXHT_V1.12507260002.X/nbproject/Package-default.bash

@@ -1,73 +0,0 @@
-#!/bin/bash -x
-
-#
-# Generated - do not edit!
-#
-
-# Macros
-TOP=`pwd`
-CND_CONF=default
-CND_DISTDIR=dist
-TMPDIR=build/${CND_CONF}/${IMAGE_TYPE}/tmp-packaging
-TMPDIRNAME=tmp-packaging
-OUTPUT_PATH=dist/${CND_CONF}/${IMAGE_TYPE}/WZYXHT_V1.02412310001.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}
-OUTPUT_BASENAME=WZYXHT_V1.02412310001.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}
-PACKAGE_TOP_DIR=wzyxhtv1.02412310001.x/
-
-# Functions
-function checkReturnCode
-{
-    rc=$?
-    if [ $rc != 0 ]
-    then
-        exit $rc
-    fi
-}
-function makeDirectory
-# $1 directory path
-# $2 permission (optional)
-{
-    mkdir -p "$1"
-    checkReturnCode
-    if [ "$2" != "" ]
-    then
-      chmod $2 "$1"
-      checkReturnCode
-    fi
-}
-function copyFileToTmpDir
-# $1 from-file path
-# $2 to-file path
-# $3 permission
-{
-    cp "$1" "$2"
-    checkReturnCode
-    if [ "$3" != "" ]
-    then
-        chmod $3 "$2"
-        checkReturnCode
-    fi
-}
-
-# Setup
-cd "${TOP}"
-mkdir -p ${CND_DISTDIR}/${CND_CONF}/package
-rm -rf ${TMPDIR}
-mkdir -p ${TMPDIR}
-
-# Copy files and create directories and links
-cd "${TOP}"
-makeDirectory ${TMPDIR}/wzyxhtv1.02412310001.x/bin
-copyFileToTmpDir "${OUTPUT_PATH}" "${TMPDIR}/${PACKAGE_TOP_DIR}bin/${OUTPUT_BASENAME}" 0755
-
-
-# Generate tar file
-cd "${TOP}"
-rm -f ${CND_DISTDIR}/${CND_CONF}/package/wzyxhtv1.02412310001.x.tar
-cd ${TMPDIR}
-tar -vcf ../../../../${CND_DISTDIR}/${CND_CONF}/package/wzyxhtv1.02412310001.x.tar *
-checkReturnCode
-
-# Cleanup
-cd "${TOP}"
-rm -rf ${TMPDIR}

WZYXHT_V1.12507260002.X/WZYXHT_V1.12507260002.X/nbproject/configurations.xml

@@ -1,361 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<configurationDescriptor version="65">
-  <logicalFolder name="root" displayName="root" projectFiles="true">
-    <logicalFolder name="HeaderFiles"
-                   displayName="Header Files"
-                   projectFiles="true">
-      <itemPath>ADC.h</itemPath>
-      <itemPath>command.h</itemPath>
-      <itemPath>Delay.h</itemPath>
-      <itemPath>EEPROM.h</itemPath>
-      <itemPath>Instrument_EEPROM_Param.h</itemPath>
-      <itemPath>Interrupt.h</itemPath>
-      <itemPath>IO.h</itemPath>
-      <itemPath>main.h</itemPath>
-      <itemPath>Motor.h</itemPath>
-      <itemPath>PWM.h</itemPath>
-      <itemPath>system.h</itemPath>
-      <itemPath>Temperature_Control.h</itemPath>
-      <itemPath>Timer.h</itemPath>
-      <itemPath>Uart.h</itemPath>
-    </logicalFolder>
-    <logicalFolder name="LinkerScript"
-                   displayName="Linker Files"
-                   projectFiles="true">
-    </logicalFolder>
-    <logicalFolder name="SourceFiles"
-                   displayName="Source Files"
-                   projectFiles="true">
-      <itemPath>main.c</itemPath>
-      <itemPath>ADC.c</itemPath>
-      <itemPath>command.c</itemPath>
-      <itemPath>Delay.c</itemPath>
-      <itemPath>EEPROM.c</itemPath>
-      <itemPath>Instrument_EEPROM_Param.c</itemPath>
-      <itemPath>Interrupt.c</itemPath>
-      <itemPath>IO.c</itemPath>
-      <itemPath>Motor.c</itemPath>
-      <itemPath>PWM.c</itemPath>
-      <itemPath>system.c</itemPath>
-      <itemPath>Temperature_Control.c</itemPath>
-      <itemPath>Timer.c</itemPath>
-      <itemPath>Uart.c</itemPath>
-      <itemPath>readme.txt</itemPath>
-    </logicalFolder>
-    <logicalFolder name="ExternalFiles"
-                   displayName="Important Files"
-                   projectFiles="false">
-      <itemPath>Makefile</itemPath>
-    </logicalFolder>
-  </logicalFolder>
-  <sourceRootList>
-    <Elem>.</Elem>
-  </sourceRootList>
-  <projectmakefile>Makefile</projectmakefile>
-  <confs>
-    <conf name="default" type="2">
-      <toolsSet>
-        <developmentServer>localhost</developmentServer>
-        <targetDevice>dsPIC33FJ64MC204</targetDevice>
-        <targetHeader></targetHeader>
-        <targetPluginBoard></targetPluginBoard>
-        <platformTool>PICkit3PlatformTool</platformTool>
-        <languageToolchain>XC16</languageToolchain>
-        <languageToolchainVersion>2.10</languageToolchainVersion>
-        <platform>3</platform>
-      </toolsSet>
-      <packs>
-        <pack name="dsPIC33F-GP-MC_DFP" vendor="Microchip" version="1.0.6"/>
-      </packs>
-      <ScriptingSettings>
-      </ScriptingSettings>
-      <compileType>
-        <linkerTool>
-          <linkerLibItems>
-          </linkerLibItems>
-        </linkerTool>
-        <archiverTool>
-        </archiverTool>
-        <loading>
-          <useAlternateLoadableFile>false</useAlternateLoadableFile>
-          <parseOnProdLoad>false</parseOnProdLoad>
-          <alternateLoadableFile></alternateLoadableFile>
-        </loading>
-        <subordinates>
-        </subordinates>
-      </compileType>
-      <makeCustomizationType>
-        <makeCustomizationPreStepEnabled>false</makeCustomizationPreStepEnabled>
-        <makeUseCleanTarget>false</makeUseCleanTarget>
-        <makeCustomizationPreStep></makeCustomizationPreStep>
-        <makeCustomizationPostStepEnabled>false</makeCustomizationPostStepEnabled>
-        <makeCustomizationPostStep></makeCustomizationPostStep>
-        <makeCustomizationPutChecksumInUserID>false</makeCustomizationPutChecksumInUserID>
-        <makeCustomizationEnableLongLines>false</makeCustomizationEnableLongLines>
-        <makeCustomizationNormalizeHexFile>false</makeCustomizationNormalizeHexFile>
-      </makeCustomizationType>
-      <C30>
-        <property key="code-model" value="default"/>
-        <property key="const-model" value="default"/>
-        <property key="data-model" value="default"/>
-        <property key="disable-instruction-scheduling" value="false"/>
-        <property key="enable-all-warnings" value="true"/>
-        <property key="enable-ansi-std" value="false"/>
-        <property key="enable-ansi-warnings" value="false"/>
-        <property key="enable-fatal-warnings" value="false"/>
-        <property key="enable-large-arrays" value="false"/>
-        <property key="enable-omit-frame-pointer" value="false"/>
-        <property key="enable-procedural-abstraction" value="false"/>
-        <property key="enable-short-double" value="false"/>
-        <property key="enable-symbols" value="true"/>
-        <property key="enable-unroll-loops" value="false"/>
-        <property key="extra-include-directories" value=""/>
-        <property key="isolate-each-function" value="false"/>
-        <property key="keep-inline" value="false"/>
-        <property key="oXC16gcc-align-arr" value="false"/>
-        <property key="oXC16gcc-cnsts-mauxflash" value="false"/>
-        <property key="oXC16gcc-data-sects" value="false"/>
-        <property key="oXC16gcc-errata" value=""/>
-        <property key="oXC16gcc-fillupper" value=""/>
-        <property key="oXC16gcc-large-aggregate" value="false"/>
-        <property key="oXC16gcc-mauxflash" value="false"/>
-        <property key="oXC16gcc-mpa-lvl" value=""/>
-        <property key="oXC16gcc-name-text-sec" value=""/>
-        <property key="oXC16gcc-near-chars" value="false"/>
-        <property key="oXC16gcc-no-isr-warn" value="false"/>
-        <property key="oXC16gcc-sfr-warn" value="false"/>
-        <property key="oXC16gcc-smar-io-lvl" value="1"/>
-        <property key="oXC16gcc-smart-io-fmt" value=""/>
-        <property key="optimization-level" value="0"/>
-        <property key="post-instruction-scheduling" value="default"/>
-        <property key="pre-instruction-scheduling" value="default"/>
-        <property key="preprocessor-macros" value=""/>
-        <property key="scalar-model" value="default"/>
-        <property key="use-cci" value="false"/>
-        <property key="use-iar" value="false"/>
-      </C30>
-      <C30-AR>
-        <property key="additional-options-chop-files" value="false"/>
-      </C30-AR>
-      <C30-AS>
-        <property key="assembler-symbols" value=""/>
-        <property key="expand-macros" value="false"/>
-        <property key="extra-include-directories-for-assembler" value=""/>
-        <property key="extra-include-directories-for-preprocessor" value=""/>
-        <property key="false-conditionals" value="false"/>
-        <property key="keep-locals" value="false"/>
-        <property key="list-assembly" value="false"/>
-        <property key="list-section-info" value="false"/>
-        <property key="list-source" value="false"/>
-        <property key="list-symbols" value="false"/>
-        <property key="oXC16asm-extra-opts" value=""/>
-        <property key="oXC16asm-list-to-file" value="false"/>
-        <property key="omit-debug-dirs" value="false"/>
-        <property key="omit-forms" value="false"/>
-        <property key="preprocessor-macros" value=""/>
-        <property key="relax" value="false"/>
-        <property key="warning-level" value="emit-warnings"/>
-      </C30-AS>
-      <C30-CO>
-        <property key="coverage-enable" value=""/>
-        <property key="stack-guidance" value="false"/>
-      </C30-CO>
-      <C30-LD>
-        <property key="additional-options-use-response-files" value="false"/>
-        <property key="boot-eeprom" value="no_eeprom"/>
-        <property key="boot-flash" value="no_flash"/>
-        <property key="boot-ram" value="no_ram"/>
-        <property key="boot-write-protect" value="no_write_protect"/>
-        <property key="enable-check-sections" value="false"/>
-        <property key="enable-data-init" value="true"/>
-        <property key="enable-default-isr" value="true"/>
-        <property key="enable-handles" value="true"/>
-        <property key="enable-pack-data" value="true"/>
-        <property key="extra-lib-directories" value=""/>
-        <property key="fill-flash-options-addr" value=""/>
-        <property key="fill-flash-options-const" value=""/>
-        <property key="fill-flash-options-how" value="0"/>
-        <property key="fill-flash-options-inc-const" value="1"/>
-        <property key="fill-flash-options-increment" value=""/>
-        <property key="fill-flash-options-seq" value=""/>
-        <property key="fill-flash-options-what" value="0"/>
-        <property key="general-code-protect" value="no_code_protect"/>
-        <property key="general-write-protect" value="no_write_protect"/>
-        <property key="generate-cross-reference-file" value="false"/>
-        <property key="heap-size" value=""/>
-        <property key="input-libraries" value=""/>
-        <property key="linker-stack" value="true"/>
-        <property key="linker-symbols" value=""/>
-        <property key="map-file" value="${DISTDIR}/${PROJECTNAME}.${IMAGE_TYPE}.map"/>
-        <property key="no-ivt" value="false"/>
-        <property key="oXC16ld-extra-opts" value=""/>
-        <property key="oXC16ld-fill-upper" value="0"/>
-        <property key="oXC16ld-force-link" value="false"/>
-        <property key="oXC16ld-no-smart-io" value="false"/>
-        <property key="oXC16ld-nostdlib" value="false"/>
-        <property key="oXC16ld-stackguard" value="16"/>
-        <property key="preprocessor-macros" value=""/>
-        <property key="remove-unused-sections" value="false"/>
-        <property key="report-memory-usage" value="true"/>
-        <property key="secure-eeprom" value="no_eeprom"/>
-        <property key="secure-flash" value="no_flash"/>
-        <property key="secure-ram" value="no_ram"/>
-        <property key="secure-write-protect" value="no_write_protect"/>
-        <property key="stack-size" value="16"/>
-        <property key="symbol-stripping" value=""/>
-        <property key="trace-symbols" value=""/>
-        <property key="warn-section-align" value="false"/>
-      </C30-LD>
-      <C30Global>
-        <property key="common-include-directories" value=""/>
-        <property key="dual-boot-partition" value="0"/>
-        <property key="fast-math" value="false"/>
-        <property key="generic-16-bit" value="false"/>
-        <property key="legacy-libc" value="true"/>
-        <property key="mpreserve-all" value="false"/>
-        <property key="oXC16glb-macros" value=""/>
-        <property key="output-file-format" value="elf"/>
-        <property key="preserve-all" value="false"/>
-        <property key="preserve-file" value=""/>
-        <property key="relaxed-math" value="false"/>
-        <property key="save-temps" value="false"/>
-      </C30Global>
-      <PICkit3PlatformTool>
-        <property key="ADC 1" value="true"/>
-        <property key="AutoSelectMemRanges" value="auto"/>
-        <property key="CRC" value="true"/>
-        <property key="DUAL COMPARATOR" value="true"/>
-        <property key="I2C1" value="true"/>
-        <property key="INPUT CAPTURE 1" value="true"/>
-        <property key="INPUT CAPTURE 2" value="true"/>
-        <property key="INPUT CAPTURE 7" value="true"/>
-        <property key="INPUT CAPTURE 8" value="true"/>
-        <property key="OUTPUT COMPARE 1" value="true"/>
-        <property key="OUTPUT COMPARE 2" value="true"/>
-        <property key="OUTPUT COMPARE 3" value="true"/>
-        <property key="OUTPUT COMPARE 8" value="true"/>
-        <property key="PARALLEL MASTER/SLAVE PORT" value="true"/>
-        <property key="PWM 1" value="true"/>
-        <property key="PWM 2" value="true"/>
-        <property key="REAL TIME CLOCK AND CALENDAR" value="true"/>
-        <property key="SPI 1" value="true"/>
-        <property key="SPI 2" value="true"/>
-        <property key="TIMER1" value="true"/>
-        <property key="TIMER2" value="true"/>
-        <property key="TIMER3" value="true"/>
-        <property key="TIMER4" value="true"/>
-        <property key="TIMER5" value="true"/>
-        <property key="ToolFirmwareFilePath"
-                  value="Press to browse for a specific firmware version"/>
-        <property key="ToolFirmwareOption.UseLatestFirmware" value="true"/>
-        <property key="UART 1" value="true"/>
-        <property key="UART 2" value="true"/>
-        <property key="debugoptions.useswbreakpoints" value="false"/>
-        <property key="firmware.download.all" value="false"/>
-        <property key="hwtoolclock.frcindebug" value="false"/>
-        <property key="memories.aux" value="false"/>
-        <property key="memories.bootflash" value="true"/>
-        <property key="memories.configurationmemory" value="true"/>
-        <property key="memories.configurationmemory2" value="true"/>
-        <property key="memories.dataflash" value="true"/>
-        <property key="memories.eeprom" value="true"/>
-        <property key="memories.flashdata" value="true"/>
-        <property key="memories.id" value="true"/>
-        <property key="memories.instruction.ram" value="true"/>
-        <property key="memories.instruction.ram.ranges"
-                  value="${memories.instruction.ram.ranges}"/>
-        <property key="memories.programmemory" value="true"/>
-        <property key="memories.programmemory.ranges" value="0-7fffff"/>
-        <property key="poweroptions.powerenable" value="false"/>
-        <property key="programmertogo.imagename" value=""/>
-        <property key="programoptions.donoteraseauxmem" value="false"/>
-        <property key="programoptions.eraseb4program" value="true"/>
-        <property key="programoptions.pgmspeed" value="2"/>
-        <property key="programoptions.preservedataflash" value="false"/>
-        <property key="programoptions.preservedataflash.ranges"
-                  value="${programoptions.preservedataflash.ranges}"/>
-        <property key="programoptions.preserveeeprom" value="false"/>
-        <property key="programoptions.preserveeeprom.ranges" value=""/>
-        <property key="programoptions.preserveprogram.ranges" value=""/>
-        <property key="programoptions.preserveprogramrange" value="false"/>
-        <property key="programoptions.preserveuserid" value="false"/>
-        <property key="programoptions.programcalmem" value="false"/>
-        <property key="programoptions.programuserotp" value="false"/>
-        <property key="programoptions.testmodeentrymethod" value="VDDFirst"/>
-        <property key="programoptions.usehighvoltageonmclr" value="false"/>
-        <property key="programoptions.uselvpprogramming" value="false"/>
-        <property key="voltagevalue" value="3.25"/>
-        <property key="冻结所有其他外设" value="true"/>
-        <property key="安全段。分部编程" value="SegmentProgrammingAll"/>
-      </PICkit3PlatformTool>
-      <Tool>
-        <property key="ADC 1" value="true"/>
-        <property key="AutoSelectMemRanges" value="auto"/>
-        <property key="CRC" value="true"/>
-        <property key="DUAL COMPARATOR" value="true"/>
-        <property key="I2C1" value="true"/>
-        <property key="INPUT CAPTURE 1" value="true"/>
-        <property key="INPUT CAPTURE 2" value="true"/>
-        <property key="INPUT CAPTURE 7" value="true"/>
-        <property key="INPUT CAPTURE 8" value="true"/>
-        <property key="OUTPUT COMPARE 1" value="true"/>
-        <property key="OUTPUT COMPARE 2" value="true"/>
-        <property key="OUTPUT COMPARE 3" value="true"/>
-        <property key="OUTPUT COMPARE 8" value="true"/>
-        <property key="PARALLEL MASTER/SLAVE PORT" value="true"/>
-        <property key="PWM 1" value="true"/>
-        <property key="PWM 2" value="true"/>
-        <property key="REAL TIME CLOCK AND CALENDAR" value="true"/>
-        <property key="SPI 1" value="true"/>
-        <property key="SPI 2" value="true"/>
-        <property key="TIMER1" value="true"/>
-        <property key="TIMER2" value="true"/>
-        <property key="TIMER3" value="true"/>
-        <property key="TIMER4" value="true"/>
-        <property key="TIMER5" value="true"/>
-        <property key="ToolFirmwareFilePath"
-                  value="Press to browse for a specific firmware version"/>
-        <property key="ToolFirmwareOption.UseLatestFirmware" value="true"/>
-        <property key="UART 1" value="true"/>
-        <property key="UART 2" value="true"/>
-        <property key="debugoptions.useswbreakpoints" value="false"/>
-        <property key="firmware.download.all" value="false"/>
-        <property key="hwtoolclock.frcindebug" value="false"/>
-        <property key="memories.aux" value="false"/>
-        <property key="memories.bootflash" value="true"/>
-        <property key="memories.configurationmemory" value="true"/>
-        <property key="memories.configurationmemory2" value="true"/>
-        <property key="memories.dataflash" value="true"/>
-        <property key="memories.eeprom" value="true"/>
-        <property key="memories.flashdata" value="true"/>
-        <property key="memories.id" value="true"/>
-        <property key="memories.instruction.ram" value="true"/>
-        <property key="memories.instruction.ram.ranges"
-                  value="${memories.instruction.ram.ranges}"/>
-        <property key="memories.programmemory" value="true"/>
-        <property key="memories.programmemory.ranges" value="0-7fffff"/>
-        <property key="poweroptions.powerenable" value="false"/>
-        <property key="programmertogo.imagename" value=""/>
-        <property key="programoptions.donoteraseauxmem" value="false"/>
-        <property key="programoptions.eraseb4program" value="true"/>
-        <property key="programoptions.pgmspeed" value="2"/>
-        <property key="programoptions.preservedataflash" value="false"/>
-        <property key="programoptions.preservedataflash.ranges"
-                  value="${programoptions.preservedataflash.ranges}"/>
-        <property key="programoptions.preserveeeprom" value="false"/>
-        <property key="programoptions.preserveeeprom.ranges" value=""/>
-        <property key="programoptions.preserveprogram.ranges" value=""/>
-        <property key="programoptions.preserveprogramrange" value="false"/>
-        <property key="programoptions.preserveuserid" value="false"/>
-        <property key="programoptions.programcalmem" value="false"/>
-        <property key="programoptions.programuserotp" value="false"/>
-        <property key="programoptions.testmodeentrymethod" value="VDDFirst"/>
-        <property key="programoptions.usehighvoltageonmclr" value="false"/>
-        <property key="programoptions.uselvpprogramming" value="false"/>
-        <property key="voltagevalue" value="3.25"/>
-        <property key="冻结所有其他外设" value="true"/>
-        <property key="安全段。分部编程" value="SegmentProgrammingAll"/>
-      </Tool>
-    </conf>
-  </confs>
-</configurationDescriptor>

WZYXHT_V1.12507260002.X/WZYXHT_V1.12507260002.X/nbproject/private/SuppressibleMessageMemo.properties

@@ -1,3 +0,0 @@
-#
-#Mon Jun 16 17:46:27 CST 2025
-mdbDebugger/LAST_HW_BP_RESOURCE_WARN=true

WZYXHT_V1.12507260002.X/WZYXHT_V1.12507260002.X/nbproject/private/configurations.xml

@@ -1,25 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<configurationDescriptor version="65">
-  <projectmakefile>Makefile</projectmakefile>
-  <defaultConf>0</defaultConf>
-  <confs>
-    <conf name="default" type="2">
-      <platformToolSN>:=MPLABComm-USB-Microchip:=&lt;vid>04D8:=&lt;pid>900A:=&lt;rev>0002:=&lt;man>Microchip Technology Inc.:=&lt;prod>PICkit 3:=&lt;sn>BUR182473687:=&lt;drv>x:=&lt;xpt>h:=end</platformToolSN>
-      <languageToolchainDir>C:\Program Files\Microchip\xc16\v2.10\bin</languageToolchainDir>
-      <mdbdebugger version="1">
-        <placeholder1>place holder 1</placeholder1>
-        <placeholder2>place holder 2</placeholder2>
-      </mdbdebugger>
-      <runprofile version="6">
-        <args></args>
-        <rundir></rundir>
-        <buildfirst>true</buildfirst>
-        <console-type>0</console-type>
-        <terminal-type>0</terminal-type>
-        <remove-instrumentation>0</remove-instrumentation>
-        <environment>
-        </environment>
-      </runprofile>
-    </conf>
-  </confs>
-</configurationDescriptor>

WZYXHT_V1.12507260002.X/WZYXHT_V1.12507260002.X/nbproject/private/private.xml

@@ -1,86 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<project-private xmlns="http://www.netbeans.org/ns/project-private/1">
-    <editor-bookmarks xmlns="http://www.netbeans.org/ns/editor-bookmarks/2" lastBookmarkId="17">
-        <file>
-            <url>Instrument_EEPROM_Param.c</url>
-            <bookmark id="4">
-                <name/>
-                <line>10</line>
-                <key/>
-            </bookmark>
-        </file>
-        <file>
-            <url>main.c</url>
-            <bookmark id="14">
-                <name/>
-                <line>102</line>
-                <key/>
-            </bookmark>
-            <bookmark id="15">
-                <name/>
-                <line>244</line>
-                <key/>
-            </bookmark>
-            <bookmark id="16">
-                <name/>
-                <line>295</line>
-                <key/>
-            </bookmark>
-            <bookmark id="17">
-                <name/>
-                <line>348</line>
-                <key/>
-            </bookmark>
-        </file>
-        <file>
-            <url>command.c</url>
-            <bookmark id="5">
-                <name/>
-                <line>37</line>
-                <key/>
-            </bookmark>
-            <bookmark id="2">
-                <name/>
-                <line>261</line>
-                <key/>
-            </bookmark>
-            <bookmark id="3">
-                <name/>
-                <line>638</line>
-                <key/>
-            </bookmark>
-            <bookmark id="12">
-                <name/>
-                <line>667</line>
-                <key/>
-            </bookmark>
-            <bookmark id="13">
-                <name/>
-                <line>986</line>
-                <key/>
-            </bookmark>
-            <bookmark id="9">
-                <name/>
-                <line>1166</line>
-                <key/>
-            </bookmark>
-            <bookmark id="10">
-                <name/>
-                <line>1633</line>
-                <key/>
-            </bookmark>
-            <bookmark id="7">
-                <name/>
-                <line>1860</line>
-                <key/>
-            </bookmark>
-        </file>
-    </editor-bookmarks>
-    <open-files xmlns="http://www.netbeans.org/ns/projectui-open-files/2">
-        <group>
-            <file>file:/E:/30.%20BTD24018-WZYXPOCT/01.Code/current/WZYXHT_V1.02412310001.X/command.c</file>
-            <file>file:/E:/30.%20BTD24018-WZYXPOCT/01.Code/current/WZYXHT_V1.02412310001.X/Instrument_EEPROM_Param.c</file>
-        </group>
-        <group name="source"/>
-    </open-files>
-</project-private>

WZYXHT_V1.12507260002.X/WZYXHT_V1.12507260002.X/nbproject/project.xml

@@ -1,29 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<project xmlns="http://www.netbeans.org/ns/project/1">
-    <type>com.microchip.mplab.nbide.embedded.makeproject</type>
-    <configuration>
-        <data xmlns="http://www.netbeans.org/ns/make-project/1">
-            <name>WZYXHT_V1.12507260002</name>
-            <creation-uuid>cfa35fdd-fc0b-4a09-b831-3737d0617bcb</creation-uuid>
-            <make-project-type>0</make-project-type>
-            <c-extensions>c</c-extensions>
-            <cpp-extensions/>
-            <header-extensions>h</header-extensions>
-            <asminc-extensions/>
-            <sourceEncoding>GB2312</sourceEncoding>
-            <make-dep-projects/>
-            <sourceRootList>
-                <sourceRootElem>.</sourceRootElem>
-            </sourceRootList>
-            <confList>
-                <confElem>
-                    <name>default</name>
-                    <type>2</type>
-                </confElem>
-            </confList>
-            <formatting>
-                <project-formatting-style>false</project-formatting-style>
-            </formatting>
-        </data>
-    </configuration>
-</project>

WZYXPCR_NO1.20250726.X/WZYXPCR_NO1.20250726.X/Makefile

@@ -1,113 +0,0 @@
-#
-#  There exist several targets which are by default empty and which can be 
-#  used for execution of your targets. These targets are usually executed 
-#  before and after some main targets. They are: 
-#
-#     .build-pre:              called before 'build' target
-#     .build-post:             called after 'build' target
-#     .clean-pre:              called before 'clean' target
-#     .clean-post:             called after 'clean' target
-#     .clobber-pre:            called before 'clobber' target
-#     .clobber-post:           called after 'clobber' target
-#     .all-pre:                called before 'all' target
-#     .all-post:               called after 'all' target
-#     .help-pre:               called before 'help' target
-#     .help-post:              called after 'help' target
-#
-#  Targets beginning with '.' are not intended to be called on their own.
-#
-#  Main targets can be executed directly, and they are:
-#  
-#     build                    build a specific configuration
-#     clean                    remove built files from a configuration
-#     clobber                  remove all built files
-#     all                      build all configurations
-#     help                     print help mesage
-#  
-#  Targets .build-impl, .clean-impl, .clobber-impl, .all-impl, and
-#  .help-impl are implemented in nbproject/makefile-impl.mk.
-#
-#  Available make variables:
-#
-#     CND_BASEDIR                base directory for relative paths
-#     CND_DISTDIR                default top distribution directory (build artifacts)
-#     CND_BUILDDIR               default top build directory (object files, ...)
-#     CONF                       name of current configuration
-#     CND_ARTIFACT_DIR_${CONF}   directory of build artifact (current configuration)
-#     CND_ARTIFACT_NAME_${CONF}  name of build artifact (current configuration)
-#     CND_ARTIFACT_PATH_${CONF}  path to build artifact (current configuration)
-#     CND_PACKAGE_DIR_${CONF}    directory of package (current configuration)
-#     CND_PACKAGE_NAME_${CONF}   name of package (current configuration)
-#     CND_PACKAGE_PATH_${CONF}   path to package (current configuration)
-#
-# NOCDDL
-
-
-# Environment 
-MKDIR=mkdir
-CP=cp
-CCADMIN=CCadmin
-RANLIB=ranlib
-
-
-# build
-build: .build-post
-
-.build-pre:
-# Add your pre 'build' code here...
-
-.build-post: .build-impl
-# Add your post 'build' code here...
-
-
-# clean
-clean: .clean-post
-
-.clean-pre:
-# Add your pre 'clean' code here...
-# WARNING: the IDE does not call this target since it takes a long time to
-# simply run make. Instead, the IDE removes the configuration directories
-# under build and dist directly without calling make.
-# This target is left here so people can do a clean when running a clean
-# outside the IDE.
-
-.clean-post: .clean-impl
-# Add your post 'clean' code here...
-
-
-# clobber
-clobber: .clobber-post
-
-.clobber-pre:
-# Add your pre 'clobber' code here...
-
-.clobber-post: .clobber-impl
-# Add your post 'clobber' code here...
-
-
-# all
-all: .all-post
-
-.all-pre:
-# Add your pre 'all' code here...
-
-.all-post: .all-impl
-# Add your post 'all' code here...
-
-
-# help
-help: .help-post
-
-.help-pre:
-# Add your pre 'help' code here...
-
-.help-post: .help-impl
-# Add your post 'help' code here...
-
-
-
-# include project implementation makefile
-include nbproject/Makefile-impl.mk
-
-# include project make variables
-include nbproject/Makefile-variables.mk

WZYXPCR_NO1.20250726.X/WZYXPCR_NO1.20250726.X/file/DMA.c

@@ -33,6 +33,19 @@ void InitDMA(void)
     DMA1CONbits.CHEN= 0;//Æô¶¯
     IFS0bits.DMA1IF = 1;
 
+
+	DMA2CON=0X6001;                           
+    DMA2CNT=SHORT_DATA;                      
+    DMA2REQ=0x53;                              
+    DMA2PAD=(volatile unsigned int)&U3TXREG;   
+    DMA2STAH=__builtin_dmapage(g_ucU3TX_Data);
+    DMA2STAL=__builtin_dmaoffset(g_ucU3TX_Data);
+    IFS1bits.DMA2IF = 0;                      
+    IEC1bits.DMA2IE = 0;                       
+    DMA2CONbits.CHEN= 0;                     
+    IPC6bits. DMA2IP= 1;
+    IFS1bits.DMA2IF = 1;
+
 }
 ///*******************************************************************************
 // * º¯ÊýÃû³Æ£ºInitDma0

WZYXPCR_NO1.20250726.X/WZYXPCR_NO1.20250726.X/file/EEPROM.c

@@ -328,16 +328,30 @@ void Read_Sys_EE_05(void){
     EE_StrRead(0x1FE,(unsigned char*)&i,2);
     if(i==100){
 /*****************************************/
-        EE_StrRead(0x574, (unsigned char*) &g_tEE.CutUart, 2);       
+        EE_StrRead(0x574, (unsigned char*) &g_tEE.CutUart, 2);     
         if(g_tEE.CutUart == 0){
          _RP97R  = 0x01;
          _U1RXR  = 0x60; 
         }
         else if(g_tEE.CutUart == 1){
-         _RP97R  = 0x01; 
+         _RP97R  = 0x1b; 
          _U1RXR  = 0x70; 
          }   
 
+
+//        if(g_tEE.CutUart == 1){
+//         _RP65R  = 0x01; 
+//         _U1RXR  = 0x70; 	
+//		 _RP97R	= 0x1b;
+//    	 _U3RXR  = 0x60; 
+//         }   
+//        else {
+//         _RP97R  = 0x01;
+//         _U1RXR  = 0x60; 	
+//		 _RP65R	= 0x1b;
+//    	 _U3RXR  = 0x70; 
+//        }
+
         EE_StrRead(0x500, (unsigned char*) &CAPTk[0], 4);                  
         EE_StrRead(0x504, (unsigned char*) &CAPTb[0], 4);                    
         EE_StrRead(0x508, (unsigned char*) &CAPTTk[0],4);                   

WZYXPCR_NO1.20250726.X/WZYXPCR_NO1.20250726.X/file/Interrupt.c

@@ -3,6 +3,8 @@
 unsigned char g_ucENABLE = 1;
 unsigned int uiData_num = 0,uiData_buffer = 0;
 
+unsigned int timecongter=0; 
+unsigned int printtempFlag=0; 
 
 /*******************************************************************************
  * 函数名称：Init_T3
@@ -203,8 +205,9 @@ void __attribute__((interrupt,auto_psv)) _T6Interrupt (void)
     Timer++;
     if(Timer == 20){
         Timer = 0;
-        STU1 = !STU1;        
+        STU1 = !STU1;   
     }
+//	msflag++;
         
 //    待测试标定对应顺序 测试OK 
         MCUAdcBuff[0][SampleNo]  = AD_Get(0x05);     //BLOCK1
@@ -220,6 +223,7 @@ void __attribute__((interrupt,auto_psv)) _T6Interrupt (void)
     if(SampleNo > 2) {     //100ms
         SampleNo=0;
         T4CONbits.TON=1;    //off the T4  for 1ms
+		printtempFlag = 1;	   
     }
 
     

WZYXPCR_NO1.20250726.X/WZYXPCR_NO1.20250726.X/file/PIN.c

@@ -26,13 +26,16 @@ void PIN_Initialize(void){
     _TRISA4 = 0;   
     _TRISA5 = 0;  
     
-
-    _TRISF1 = 0;    
-    _TRISF0 = 1;   
-    _TRISG0 = 1;   
+    _TRISD1 = 0;         
+    _TRISF1 = 0;
+    _TRISF0 = 1;
+    _TRISG0 = 1;  
+	
     _RP97R  = 0x01; 
-    _U1RXR  = 0x60; 
-//    _U1RXR  = 0x70; 
+    _U1RXR  = 0x60;  
+	
+	_RP65R	= 0x1b;
+    _U3RXR  = 0x70; 
     
 
     _TRISK11 = 0;     //SCL

WZYXPCR_NO1.20250726.X/WZYXPCR_NO1.20250726.X/file/Uart.c

@@ -1,6 +1,48 @@
 #define  __UART_DEF
 #include "ABIS_User.h"
 
+
+#include <stdarg.h>
+#include <stdio.h>
+#include <string.h>
+	
+unsigned int  gloublePrintLevel = VAN_LOG_NOTICE;
+
+
+/****************************************************************
+* 函数名:    Van_Device_Printf
+* 创建时间:  2021/04/22
+* 创建人:    范义东
+* 函数说明：调试打印接口函数
+* 输入参数:   dev  传 NULL 采用本地定义
+						devNum   数码
+* 输出参数:   *name
+* 返回值 :   void
+****************************************************************/
+void Van_Device_Printf(unsigned int printLevel, const char *cmd, ...)
+{
+	char buf[128] = {};
+	int	 buflen			 = 0;
+
+	if (gloublePrintLevel >= printLevel)
+	{
+		va_list args; //定义一个va_list类型的变量，用来储存单个参数
+		va_start(args, cmd);	  //使args指向可变参数的第一个参数
+		vsprintf(buf, cmd, args); //必须用vprintf等带V的
+		va_end(args);			  //结束可变参数的获取
+		buflen = strlen((const char *)buf);
+		for(unsigned int i=0; i<buflen; i++){
+			g_ucU3TX_Data[i] = buf[i];
+		} 
+	    if(buflen==0)return;
+		while(DMA2CONbits.CHEN);		
+		DMA2CNT=(buflen-1);
+		DMA2CONbits.CHEN  = 1;		
+		DMA2REQbits.FORCE = 1;		
+	}
+	return;
+}
+
 /*******************************************************************************
  * 函数名称：InitUart1
  *******************************************************************************/
@@ -66,7 +108,7 @@ void InitUart3(void) {
     U3MODEbits.LPBACK = 0;  
 
     //    U1BRG = 31;       
-    U3BRG = 389;            
+    U3BRG = 31;            
 
     U3STAbits.UTXISEL0 = 1;
     U3STAbits.UTXISEL1 = 0;
@@ -270,6 +312,12 @@ void Uart1_Ack(void)
             g_ucU1TX_Data[3] = g_uiFrmLth & 0xff;                          
             g_ucU1TX_Data[4] = Flag_STATUS;                            
             g_ucU1TX_Data[5] = (unsigned char)Check(g_ucU1TX_Data,g_uiFrmLth-1);    
+//			my_printf("ans %d \n\r",g_ucU1TX_Data[3]);
+//			for(unsigned int i =0;i<g_ucU1TX_Data[3];i++){
+//				unsigned int temp = g_ucU1TX_Data[i];
+//				my_printf("%d ",temp);
+//			}		
+//			my_printf("\n\r");
             while(DMA3CONbits.CHEN);        
             DMA3CNT=(g_uiFrmLth-1);
             DMA3CONbits.CHEN  = 1;		
@@ -1636,4 +1684,4 @@ void Uart1_Ack(void)
     g_ucHeaderFlag1 = 0;
     memset(g_ucU1RX_Data,0,g_uiLth1*sizeof(unsigned char));
     g_BUSY1 = 0;
-}
+}

WZYXPCR_NO1.20250726.X/WZYXPCR_NO1.20250726.X/file/Uart.h

@@ -75,6 +75,18 @@
 #define     ZLENTH1                  134
 #define     ZLENTH2                  198
 
+
+typedef enum {
+	VAN_LOG_CRITICAL = 0,
+	VAN_LOG_ERROR = 1,
+	VAN_LOG_WARN = 2,
+	VAN_LOG_INFO = 3,
+	VAN_LOG_NOTICE = 4,
+	VAN_LOG_DEBUG = 5,
+}VAN_LOG_LEVEL_DEF;
+
+
+
 //оƬ¼ì²â
 typedef union {
 	unsigned char ChipNum;
@@ -159,6 +171,7 @@ EXTERN_UART unsigned int Alldata_Max[2000];
 
 EXTERN_UART unsigned char g_ucU1TX_Data[500] __attribute__((eds));
 EXTERN_UART unsigned int ucBuffer_Data[7000] __attribute__((eds));
+EXTERN_UART unsigned char g_ucU3TX_Data[500] __attribute__((eds));
 
 EXTERN_UART unsigned long int uiEE_address;
 EXTERN_UART unsigned char GlobalTmp,GlobalNum1;

WZYXPCR_NO1.20250726.X/WZYXPCR_NO1.20250726.X/file/main.c

@@ -42,10 +42,12 @@
 #include "ABIS_User.h"
  unsigned char VersionNumber[16]="N01.20230823";//¹Ì¼þ°æ±¾ºÅ
  unsigned char HardwareVersionNumber[16]="10062308022300802";//Ó²¼þ°æ±¾ºÅ
- 
+ extern unsigned int printtempFlag;
+ extern int my_printf(const char* str, ...);
 int main(void) {   
     unsigned int i;
     unsigned int K;
+    unsigned int timer =0;
 
     System_Init();
     POWER_STU1 = 0;                   
@@ -79,21 +81,16 @@ int main(void) {
         Delay_ms(200);
     }
     POWER_STU1 = 1;                    
-  
- 
-//     while(1){
-//        K = PIC_IN2;
-//        if(K == 0){
-//            POWER_STU1 = ~POWER_STU1;
-//        } else{
-//            break;
-//        }
-//        Delay_ms(50);
-//        if(g_ucUART1_flag == 1){  
-//            Uart1_Ack();                       
-//        }
-//    }
-    
+
+
+  my_printf("\n**********************************************************************\n\r");
+  my_printf("*                         build %s %s                        *\n\r",__DATE__,__TIME__);
+  my_printf("*                         ALPS - 004                                   *\n\r");
+  my_printf("**********************************************************************\n\r");
+
+
+
+
     Init_T6();             
     CalculateSModeLineX(g_uiMotorXPeriod, g_tEE.uiXPulseAcc, MOTORX_FREQMAX, MOTORX_FREQMIN, MOTORX_XFLEXIBLE);   
     MotorXHome(g_tEE.uiXPulseHome,g_tEE.uiXSpeedHome,g_tEE.uiXSpeedLeave);
@@ -121,7 +118,23 @@ int main(void) {
     BTvar.ucScanNum = 0;
     while(1){
         if(g_ucUART1_flag == 1){  
+			my_printf("rec %d \n\r",g_ucU1RX_Data[3]);
+			for(unsigned int i =0;i<g_ucU1RX_Data[3];i++){
+				unsigned int temp = g_ucU1RX_Data[i];
+				my_printf("%d ",temp);
+			}		
+			my_printf("\n\r");	
             Uart1_Ack();                       
         }
+
+		
+//        if(printtempFlag == 1){  
+//            printtempFlag = 0;   
+//			my_printf("temp %f, %f, %f, %f, %f, %f\n\r",
+//			TempChn[0].fCurrentTemperature,TempChn[1].fCurrentTemperature,
+//			TempChn[2].fCurrentTemperature,TempChn[3].fCurrentTemperature,
+//			TempChn[4].fCurrentTemperature,TempChn[5].fCurrentTemperature);
+//        }
+		
     }  
 }

WZYXPCR_NO1.20250726.X/WZYXPCR_NO1.20250726.X/nbproject/Makefile-default.mk

@@ -1,345 +0,0 @@
-#
-# Generated Makefile - do not edit!
-#
-# Edit the Makefile in the project folder instead (../Makefile). Each target
-# has a -pre and a -post target defined where you can add customized code.
-#
-# This makefile implements configuration specific macros and targets.
-
-
-# Include project Makefile
-ifeq "${IGNORE_LOCAL}" "TRUE"
-# do not include local makefile. User is passing all local related variables already
-else
-include Makefile
-# Include makefile containing local settings
-ifeq "$(wildcard nbproject/Makefile-local-default.mk)" "nbproject/Makefile-local-default.mk"
-include nbproject/Makefile-local-default.mk
-endif
-endif
-
-# Environment
-MKDIR=gnumkdir -p
-RM=rm -f 
-MV=mv 
-CP=cp 
-
-# Macros
-CND_CONF=default
-ifeq ($(TYPE_IMAGE), DEBUG_RUN)
-IMAGE_TYPE=debug
-OUTPUT_SUFFIX=elf
-DEBUGGABLE_SUFFIX=elf
-FINAL_IMAGE=${DISTDIR}/WZYXPCR_NO1.20250726.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}
-else
-IMAGE_TYPE=production
-OUTPUT_SUFFIX=hex
-DEBUGGABLE_SUFFIX=elf
-FINAL_IMAGE=${DISTDIR}/WZYXPCR_NO1.20250726.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}
-endif
-
-ifeq ($(COMPARE_BUILD), true)
-COMPARISON_BUILD=-mafrlcsj
-else
-COMPARISON_BUILD=
-endif
-
-# Object Directory
-OBJECTDIR=build/${CND_CONF}/${IMAGE_TYPE}
-
-# Distribution Directory
-DISTDIR=dist/${CND_CONF}/${IMAGE_TYPE}
-
-# Source Files Quoted if spaced
-SOURCEFILES_QUOTED_IF_SPACED=file/ABIS_User.c file/Ad.c file/Da7512.c file/Delay.c file/DMA.c file/DS1802.c file/Interrupt.c file/EEPROM.c file/main.c file/Motor.c file/OC.c file/PIN.c file/PWM.c file/readme.c file/Timer.c file/Uart.c file/Dac5571.c
-
-# Object Files Quoted if spaced
-OBJECTFILES_QUOTED_IF_SPACED=${OBJECTDIR}/file/ABIS_User.o ${OBJECTDIR}/file/Ad.o ${OBJECTDIR}/file/Da7512.o ${OBJECTDIR}/file/Delay.o ${OBJECTDIR}/file/DMA.o ${OBJECTDIR}/file/DS1802.o ${OBJECTDIR}/file/Interrupt.o ${OBJECTDIR}/file/EEPROM.o ${OBJECTDIR}/file/main.o ${OBJECTDIR}/file/Motor.o ${OBJECTDIR}/file/OC.o ${OBJECTDIR}/file/PIN.o ${OBJECTDIR}/file/PWM.o ${OBJECTDIR}/file/readme.o ${OBJECTDIR}/file/Timer.o ${OBJECTDIR}/file/Uart.o ${OBJECTDIR}/file/Dac5571.o
-POSSIBLE_DEPFILES=${OBJECTDIR}/file/ABIS_User.o.d ${OBJECTDIR}/file/Ad.o.d ${OBJECTDIR}/file/Da7512.o.d ${OBJECTDIR}/file/Delay.o.d ${OBJECTDIR}/file/DMA.o.d ${OBJECTDIR}/file/DS1802.o.d ${OBJECTDIR}/file/Interrupt.o.d ${OBJECTDIR}/file/EEPROM.o.d ${OBJECTDIR}/file/main.o.d ${OBJECTDIR}/file/Motor.o.d ${OBJECTDIR}/file/OC.o.d ${OBJECTDIR}/file/PIN.o.d ${OBJECTDIR}/file/PWM.o.d ${OBJECTDIR}/file/readme.o.d ${OBJECTDIR}/file/Timer.o.d ${OBJECTDIR}/file/Uart.o.d ${OBJECTDIR}/file/Dac5571.o.d
-
-# Object Files
-OBJECTFILES=${OBJECTDIR}/file/ABIS_User.o ${OBJECTDIR}/file/Ad.o ${OBJECTDIR}/file/Da7512.o ${OBJECTDIR}/file/Delay.o ${OBJECTDIR}/file/DMA.o ${OBJECTDIR}/file/DS1802.o ${OBJECTDIR}/file/Interrupt.o ${OBJECTDIR}/file/EEPROM.o ${OBJECTDIR}/file/main.o ${OBJECTDIR}/file/Motor.o ${OBJECTDIR}/file/OC.o ${OBJECTDIR}/file/PIN.o ${OBJECTDIR}/file/PWM.o ${OBJECTDIR}/file/readme.o ${OBJECTDIR}/file/Timer.o ${OBJECTDIR}/file/Uart.o ${OBJECTDIR}/file/Dac5571.o
-
-# Source Files
-SOURCEFILES=file/ABIS_User.c file/Ad.c file/Da7512.c file/Delay.c file/DMA.c file/DS1802.c file/Interrupt.c file/EEPROM.c file/main.c file/Motor.c file/OC.c file/PIN.c file/PWM.c file/readme.c file/Timer.c file/Uart.c file/Dac5571.c
-
-
-
-CFLAGS=
-ASFLAGS=
-LDLIBSOPTIONS=
-
-############# Tool locations ##########################################
-# If you copy a project from one host to another, the path where the  #
-# compiler is installed may be different.                             #
-# If you open this project with MPLAB X in the new host, this         #
-# makefile will be regenerated and the paths will be corrected.       #
-#######################################################################
-# fixDeps replaces a bunch of sed/cat/printf statements that slow down the build
-FIXDEPS=fixDeps
-
-.build-conf:  ${BUILD_SUBPROJECTS}
-ifneq ($(INFORMATION_MESSAGE), )
-	@echo $(INFORMATION_MESSAGE)
-endif
-	${MAKE}  -f nbproject/Makefile-default.mk ${DISTDIR}/WZYXPCR_NO1.20250726.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}
-
-MP_PROCESSOR_OPTION=33EP512MU814
-MP_LINKER_FILE_OPTION=,--script=p33EP512MU814.gld
-# ------------------------------------------------------------------------------------
-# Rules for buildStep: compile
-ifeq ($(TYPE_IMAGE), DEBUG_RUN)
-${OBJECTDIR}/file/ABIS_User.o: file/ABIS_User.c  .generated_files/flags/default/38997a614196d1748f5c391915ccc9d1f6ec5397 .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}/file" 
-	@${RM} ${OBJECTDIR}/file/ABIS_User.o.d 
-	@${RM} ${OBJECTDIR}/file/ABIS_User.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  file/ABIS_User.c  -o ${OBJECTDIR}/file/ABIS_User.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/file/ABIS_User.o.d"      -g -D__DEBUG -D__MPLAB_DEBUGGER_PK3=1  -mno-eds-warn  -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-${OBJECTDIR}/file/Ad.o: file/Ad.c  .generated_files/flags/default/d0d6b856fe9d8a32d6f504ebeeedd2e8081b189e .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}/file" 
-	@${RM} ${OBJECTDIR}/file/Ad.o.d 
-	@${RM} ${OBJECTDIR}/file/Ad.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  file/Ad.c  -o ${OBJECTDIR}/file/Ad.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/file/Ad.o.d"      -g -D__DEBUG -D__MPLAB_DEBUGGER_PK3=1  -mno-eds-warn  -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-${OBJECTDIR}/file/Da7512.o: file/Da7512.c  .generated_files/flags/default/79e478bbf8140e67938328c3a3427be93b908361 .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}/file" 
-	@${RM} ${OBJECTDIR}/file/Da7512.o.d 
-	@${RM} ${OBJECTDIR}/file/Da7512.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  file/Da7512.c  -o ${OBJECTDIR}/file/Da7512.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/file/Da7512.o.d"      -g -D__DEBUG -D__MPLAB_DEBUGGER_PK3=1  -mno-eds-warn  -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-${OBJECTDIR}/file/Delay.o: file/Delay.c  .generated_files/flags/default/f92ac7c00527a44f41b1e9e96043cc4d1f03208c .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}/file" 
-	@${RM} ${OBJECTDIR}/file/Delay.o.d 
-	@${RM} ${OBJECTDIR}/file/Delay.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  file/Delay.c  -o ${OBJECTDIR}/file/Delay.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/file/Delay.o.d"      -g -D__DEBUG -D__MPLAB_DEBUGGER_PK3=1  -mno-eds-warn  -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-${OBJECTDIR}/file/DMA.o: file/DMA.c  .generated_files/flags/default/6d3722c2226ea29c1b494a535c56be1af1f3e89d .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}/file" 
-	@${RM} ${OBJECTDIR}/file/DMA.o.d 
-	@${RM} ${OBJECTDIR}/file/DMA.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  file/DMA.c  -o ${OBJECTDIR}/file/DMA.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/file/DMA.o.d"      -g -D__DEBUG -D__MPLAB_DEBUGGER_PK3=1  -mno-eds-warn  -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-${OBJECTDIR}/file/DS1802.o: file/DS1802.c  .generated_files/flags/default/9b59a03c0eea3bc335b0d69143855d93ba363115 .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}/file" 
-	@${RM} ${OBJECTDIR}/file/DS1802.o.d 
-	@${RM} ${OBJECTDIR}/file/DS1802.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  file/DS1802.c  -o ${OBJECTDIR}/file/DS1802.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/file/DS1802.o.d"      -g -D__DEBUG -D__MPLAB_DEBUGGER_PK3=1  -mno-eds-warn  -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-${OBJECTDIR}/file/Interrupt.o: file/Interrupt.c  .generated_files/flags/default/4ada79aa7672b899d817446415f76882fb6eea4d .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}/file" 
-	@${RM} ${OBJECTDIR}/file/Interrupt.o.d 
-	@${RM} ${OBJECTDIR}/file/Interrupt.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  file/Interrupt.c  -o ${OBJECTDIR}/file/Interrupt.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/file/Interrupt.o.d"      -g -D__DEBUG -D__MPLAB_DEBUGGER_PK3=1  -mno-eds-warn  -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-${OBJECTDIR}/file/EEPROM.o: file/EEPROM.c  .generated_files/flags/default/207287b9e5730930bbfeb87bebbc5f5ebcd6e710 .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}/file" 
-	@${RM} ${OBJECTDIR}/file/EEPROM.o.d 
-	@${RM} ${OBJECTDIR}/file/EEPROM.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  file/EEPROM.c  -o ${OBJECTDIR}/file/EEPROM.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/file/EEPROM.o.d"      -g -D__DEBUG -D__MPLAB_DEBUGGER_PK3=1  -mno-eds-warn  -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-${OBJECTDIR}/file/main.o: file/main.c  .generated_files/flags/default/6b34cf3627eb0a73c7c78ed25de61add604a3e11 .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}/file" 
-	@${RM} ${OBJECTDIR}/file/main.o.d 
-	@${RM} ${OBJECTDIR}/file/main.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  file/main.c  -o ${OBJECTDIR}/file/main.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/file/main.o.d"      -g -D__DEBUG -D__MPLAB_DEBUGGER_PK3=1  -mno-eds-warn  -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-${OBJECTDIR}/file/Motor.o: file/Motor.c  .generated_files/flags/default/7156ca7d1dca982417d2239e343a5ae5ce4e0d53 .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}/file" 
-	@${RM} ${OBJECTDIR}/file/Motor.o.d 
-	@${RM} ${OBJECTDIR}/file/Motor.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  file/Motor.c  -o ${OBJECTDIR}/file/Motor.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/file/Motor.o.d"      -g -D__DEBUG -D__MPLAB_DEBUGGER_PK3=1  -mno-eds-warn  -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-${OBJECTDIR}/file/OC.o: file/OC.c  .generated_files/flags/default/3aadb8e629e4fb4848d17a5dec85444e201f54aa .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}/file" 
-	@${RM} ${OBJECTDIR}/file/OC.o.d 
-	@${RM} ${OBJECTDIR}/file/OC.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  file/OC.c  -o ${OBJECTDIR}/file/OC.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/file/OC.o.d"      -g -D__DEBUG -D__MPLAB_DEBUGGER_PK3=1  -mno-eds-warn  -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-${OBJECTDIR}/file/PIN.o: file/PIN.c  .generated_files/flags/default/d4623b1b2d598d11ec1e1a9dd179da79b3233cdd .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}/file" 
-	@${RM} ${OBJECTDIR}/file/PIN.o.d 
-	@${RM} ${OBJECTDIR}/file/PIN.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  file/PIN.c  -o ${OBJECTDIR}/file/PIN.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/file/PIN.o.d"      -g -D__DEBUG -D__MPLAB_DEBUGGER_PK3=1  -mno-eds-warn  -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-${OBJECTDIR}/file/PWM.o: file/PWM.c  .generated_files/flags/default/6266f61cfcc7da1c0ee6d8d1ee8db66c870dbe18 .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}/file" 
-	@${RM} ${OBJECTDIR}/file/PWM.o.d 
-	@${RM} ${OBJECTDIR}/file/PWM.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  file/PWM.c  -o ${OBJECTDIR}/file/PWM.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/file/PWM.o.d"      -g -D__DEBUG -D__MPLAB_DEBUGGER_PK3=1  -mno-eds-warn  -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-${OBJECTDIR}/file/readme.o: file/readme.c  .generated_files/flags/default/44c1b7b7043e4715beec591e30cc25540b7352d8 .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}/file" 
-	@${RM} ${OBJECTDIR}/file/readme.o.d 
-	@${RM} ${OBJECTDIR}/file/readme.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  file/readme.c  -o ${OBJECTDIR}/file/readme.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/file/readme.o.d"      -g -D__DEBUG -D__MPLAB_DEBUGGER_PK3=1  -mno-eds-warn  -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-${OBJECTDIR}/file/Timer.o: file/Timer.c  .generated_files/flags/default/f15e8a602401fc9395f633d6dcdf54901df1b4b1 .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}/file" 
-	@${RM} ${OBJECTDIR}/file/Timer.o.d 
-	@${RM} ${OBJECTDIR}/file/Timer.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  file/Timer.c  -o ${OBJECTDIR}/file/Timer.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/file/Timer.o.d"      -g -D__DEBUG -D__MPLAB_DEBUGGER_PK3=1  -mno-eds-warn  -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-${OBJECTDIR}/file/Uart.o: file/Uart.c  .generated_files/flags/default/6851fd0e35795d4278561743343380236edce620 .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}/file" 
-	@${RM} ${OBJECTDIR}/file/Uart.o.d 
-	@${RM} ${OBJECTDIR}/file/Uart.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  file/Uart.c  -o ${OBJECTDIR}/file/Uart.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/file/Uart.o.d"      -g -D__DEBUG -D__MPLAB_DEBUGGER_PK3=1  -mno-eds-warn  -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-${OBJECTDIR}/file/Dac5571.o: file/Dac5571.c  .generated_files/flags/default/a6946065f9c049bc549f25c2af4b51dc24a0f2fa .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}/file" 
-	@${RM} ${OBJECTDIR}/file/Dac5571.o.d 
-	@${RM} ${OBJECTDIR}/file/Dac5571.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  file/Dac5571.c  -o ${OBJECTDIR}/file/Dac5571.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/file/Dac5571.o.d"      -g -D__DEBUG -D__MPLAB_DEBUGGER_PK3=1  -mno-eds-warn  -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-else
-${OBJECTDIR}/file/ABIS_User.o: file/ABIS_User.c  .generated_files/flags/default/de283369ec850fa455129d88340b7cd667cda0f2 .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}/file" 
-	@${RM} ${OBJECTDIR}/file/ABIS_User.o.d 
-	@${RM} ${OBJECTDIR}/file/ABIS_User.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  file/ABIS_User.c  -o ${OBJECTDIR}/file/ABIS_User.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/file/ABIS_User.o.d"      -mno-eds-warn  -g -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-${OBJECTDIR}/file/Ad.o: file/Ad.c  .generated_files/flags/default/8440332f09ae565981760b9ec7bff2170b731e10 .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}/file" 
-	@${RM} ${OBJECTDIR}/file/Ad.o.d 
-	@${RM} ${OBJECTDIR}/file/Ad.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  file/Ad.c  -o ${OBJECTDIR}/file/Ad.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/file/Ad.o.d"      -mno-eds-warn  -g -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-${OBJECTDIR}/file/Da7512.o: file/Da7512.c  .generated_files/flags/default/f8e6cc36252a4d518a56c6d4c3ef976282f90bb .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}/file" 
-	@${RM} ${OBJECTDIR}/file/Da7512.o.d 
-	@${RM} ${OBJECTDIR}/file/Da7512.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  file/Da7512.c  -o ${OBJECTDIR}/file/Da7512.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/file/Da7512.o.d"      -mno-eds-warn  -g -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-${OBJECTDIR}/file/Delay.o: file/Delay.c  .generated_files/flags/default/136ee1eef558a01311f805f0c7f4b83a9ce7e70c .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}/file" 
-	@${RM} ${OBJECTDIR}/file/Delay.o.d 
-	@${RM} ${OBJECTDIR}/file/Delay.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  file/Delay.c  -o ${OBJECTDIR}/file/Delay.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/file/Delay.o.d"      -mno-eds-warn  -g -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-${OBJECTDIR}/file/DMA.o: file/DMA.c  .generated_files/flags/default/9249682dbbde9cc7e0ed3a0a222af9dd8b4955c5 .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}/file" 
-	@${RM} ${OBJECTDIR}/file/DMA.o.d 
-	@${RM} ${OBJECTDIR}/file/DMA.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  file/DMA.c  -o ${OBJECTDIR}/file/DMA.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/file/DMA.o.d"      -mno-eds-warn  -g -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-${OBJECTDIR}/file/DS1802.o: file/DS1802.c  .generated_files/flags/default/e9c79fb67e11cc7ee0aa30ea77a2dc65c714eee8 .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}/file" 
-	@${RM} ${OBJECTDIR}/file/DS1802.o.d 
-	@${RM} ${OBJECTDIR}/file/DS1802.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  file/DS1802.c  -o ${OBJECTDIR}/file/DS1802.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/file/DS1802.o.d"      -mno-eds-warn  -g -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-${OBJECTDIR}/file/Interrupt.o: file/Interrupt.c  .generated_files/flags/default/eb1f547c1c8d1c2ec6a4c2132e8b509971aefa29 .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}/file" 
-	@${RM} ${OBJECTDIR}/file/Interrupt.o.d 
-	@${RM} ${OBJECTDIR}/file/Interrupt.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  file/Interrupt.c  -o ${OBJECTDIR}/file/Interrupt.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/file/Interrupt.o.d"      -mno-eds-warn  -g -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-${OBJECTDIR}/file/EEPROM.o: file/EEPROM.c  .generated_files/flags/default/f80ecf532c3d521f2b741c007dd1e0a0d3978633 .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}/file" 
-	@${RM} ${OBJECTDIR}/file/EEPROM.o.d 
-	@${RM} ${OBJECTDIR}/file/EEPROM.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  file/EEPROM.c  -o ${OBJECTDIR}/file/EEPROM.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/file/EEPROM.o.d"      -mno-eds-warn  -g -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-${OBJECTDIR}/file/main.o: file/main.c  .generated_files/flags/default/dad034eaba1b1dc3a81b58a4874fc690233bff7c .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}/file" 
-	@${RM} ${OBJECTDIR}/file/main.o.d 
-	@${RM} ${OBJECTDIR}/file/main.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  file/main.c  -o ${OBJECTDIR}/file/main.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/file/main.o.d"      -mno-eds-warn  -g -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-${OBJECTDIR}/file/Motor.o: file/Motor.c  .generated_files/flags/default/dbda6a38909aee4b49e51a54f7ca4e6d002ce778 .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}/file" 
-	@${RM} ${OBJECTDIR}/file/Motor.o.d 
-	@${RM} ${OBJECTDIR}/file/Motor.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  file/Motor.c  -o ${OBJECTDIR}/file/Motor.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/file/Motor.o.d"      -mno-eds-warn  -g -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-${OBJECTDIR}/file/OC.o: file/OC.c  .generated_files/flags/default/ba79e4a1bfdc33cd6b8d413dfea0f2657f2cfdd4 .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}/file" 
-	@${RM} ${OBJECTDIR}/file/OC.o.d 
-	@${RM} ${OBJECTDIR}/file/OC.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  file/OC.c  -o ${OBJECTDIR}/file/OC.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/file/OC.o.d"      -mno-eds-warn  -g -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-${OBJECTDIR}/file/PIN.o: file/PIN.c  .generated_files/flags/default/1feb9751342fd015787114834b8b2360501cdb04 .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}/file" 
-	@${RM} ${OBJECTDIR}/file/PIN.o.d 
-	@${RM} ${OBJECTDIR}/file/PIN.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  file/PIN.c  -o ${OBJECTDIR}/file/PIN.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/file/PIN.o.d"      -mno-eds-warn  -g -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-${OBJECTDIR}/file/PWM.o: file/PWM.c  .generated_files/flags/default/84463cba55a227f2b8100f63f71e8e98013bbf10 .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}/file" 
-	@${RM} ${OBJECTDIR}/file/PWM.o.d 
-	@${RM} ${OBJECTDIR}/file/PWM.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  file/PWM.c  -o ${OBJECTDIR}/file/PWM.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/file/PWM.o.d"      -mno-eds-warn  -g -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-${OBJECTDIR}/file/readme.o: file/readme.c  .generated_files/flags/default/44945495eb73611ae11a1d33ccc304023ec1d825 .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}/file" 
-	@${RM} ${OBJECTDIR}/file/readme.o.d 
-	@${RM} ${OBJECTDIR}/file/readme.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  file/readme.c  -o ${OBJECTDIR}/file/readme.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/file/readme.o.d"      -mno-eds-warn  -g -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-${OBJECTDIR}/file/Timer.o: file/Timer.c  .generated_files/flags/default/7872e5b5588c64e339edaf8c69d569570ebb0d10 .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}/file" 
-	@${RM} ${OBJECTDIR}/file/Timer.o.d 
-	@${RM} ${OBJECTDIR}/file/Timer.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  file/Timer.c  -o ${OBJECTDIR}/file/Timer.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/file/Timer.o.d"      -mno-eds-warn  -g -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-${OBJECTDIR}/file/Uart.o: file/Uart.c  .generated_files/flags/default/51aa97b7b49f5cfd98b42401bfed1c06a807fc0f .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}/file" 
-	@${RM} ${OBJECTDIR}/file/Uart.o.d 
-	@${RM} ${OBJECTDIR}/file/Uart.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  file/Uart.c  -o ${OBJECTDIR}/file/Uart.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/file/Uart.o.d"      -mno-eds-warn  -g -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-${OBJECTDIR}/file/Dac5571.o: file/Dac5571.c  .generated_files/flags/default/96ffea408976690f7ee7b09d0bc2a9250d24bff8 .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}/file" 
-	@${RM} ${OBJECTDIR}/file/Dac5571.o.d 
-	@${RM} ${OBJECTDIR}/file/Dac5571.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  file/Dac5571.c  -o ${OBJECTDIR}/file/Dac5571.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/file/Dac5571.o.d"      -mno-eds-warn  -g -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off   
-	
-endif
-
-# ------------------------------------------------------------------------------------
-# Rules for buildStep: assemble
-ifeq ($(TYPE_IMAGE), DEBUG_RUN)
-else
-endif
-
-# ------------------------------------------------------------------------------------
-# Rules for buildStep: assemblePreproc
-ifeq ($(TYPE_IMAGE), DEBUG_RUN)
-else
-endif
-
-# ------------------------------------------------------------------------------------
-# Rules for buildStep: link
-ifeq ($(TYPE_IMAGE), DEBUG_RUN)
-${DISTDIR}/WZYXPCR_NO1.20250726.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}: ${OBJECTFILES}  nbproject/Makefile-${CND_CONF}.mk    
-	@${MKDIR} ${DISTDIR} 
-	${MP_CC} $(MP_EXTRA_LD_PRE)  -o ${DISTDIR}/WZYXPCR_NO1.20250726.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}  ${OBJECTFILES_QUOTED_IF_SPACED}      -mcpu=$(MP_PROCESSOR_OPTION)        -D__DEBUG=__DEBUG -D__MPLAB_DEBUGGER_PK3=1  -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)   -mreserve=data@0x1000:0x101B -mreserve=data@0x101C:0x101D -mreserve=data@0x101E:0x101F -mreserve=data@0x1020:0x1021 -mreserve=data@0x1022:0x1023 -mreserve=data@0x1024:0x1027 -mreserve=data@0x1028:0x104F   -Wl,--local-stack,,--defsym=__MPLAB_BUILD=1,--defsym=__MPLAB_DEBUG=1,--defsym=__DEBUG=1,-D__DEBUG=__DEBUG,--defsym=__MPLAB_DEBUGGER_PK3=1,$(MP_LINKER_FILE_OPTION),--stack=16,--check-sections,--data-init,--pack-data,--handles,--isr,--no-gc-sections,--fill-upper=0,--stackguard=16,--no-force-link,--smart-io,-Map="${DISTDIR}/${PROJECTNAME}.${IMAGE_TYPE}.map",--report-mem,--memorysummary,${DISTDIR}/memoryfile.xml$(MP_EXTRA_LD_POST)  
-	
-else
-${DISTDIR}/WZYXPCR_NO1.20250726.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}: ${OBJECTFILES}  nbproject/Makefile-${CND_CONF}.mk   
-	@${MKDIR} ${DISTDIR} 
-	${MP_CC} $(MP_EXTRA_LD_PRE)  -o ${DISTDIR}/WZYXPCR_NO1.20250726.X.${IMAGE_TYPE}.${DEBUGGABLE_SUFFIX}  ${OBJECTFILES_QUOTED_IF_SPACED}      -mcpu=$(MP_PROCESSOR_OPTION)        -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -Wl,--local-stack,,--defsym=__MPLAB_BUILD=1,$(MP_LINKER_FILE_OPTION),--stack=16,--check-sections,--data-init,--pack-data,--handles,--isr,--no-gc-sections,--fill-upper=0,--stackguard=16,--no-force-link,--smart-io,-Map="${DISTDIR}/${PROJECTNAME}.${IMAGE_TYPE}.map",--report-mem,--memorysummary,${DISTDIR}/memoryfile.xml$(MP_EXTRA_LD_POST)  
-	${MP_CC_DIR}\\xc16-bin2hex ${DISTDIR}/WZYXPCR_NO1.20250726.X.${IMAGE_TYPE}.${DEBUGGABLE_SUFFIX} -a  -omf=elf   
-	
-endif
-
-
-# Subprojects
-.build-subprojects:
-
-
-# Subprojects
-.clean-subprojects:
-
-# Clean Targets
-.clean-conf: ${CLEAN_SUBPROJECTS}
-	${RM} -r ${OBJECTDIR}
-	${RM} -r ${DISTDIR}
-
-# Enable dependency checking
-.dep.inc: .depcheck-impl
-
-DEPFILES=$(wildcard ${POSSIBLE_DEPFILES})
-ifneq (${DEPFILES},)
-include ${DEPFILES}
-endif

WZYXPCR_NO1.20250726.X/WZYXPCR_NO1.20250726.X/nbproject/Makefile-genesis.properties

@@ -1,13 +0,0 @@
-#
-#Tue Aug 05 18:39:51 CST 2025
-default.languagetoolchain.version=2.10
-default.Pack.dfplocation=C\:\\Users\\onechip\\.mchp_packs\\Microchip\\dsPIC33E-GM-GP-MC-GU-MU_DFP\\1.0.23
-conf.ids=default
-default.languagetoolchain.dir=C\:\\Program Files\\Microchip\\xc16\\v2.10\\bin
-host.id=1lj1-c7wd-qs
-configurations-xml=04f6ad8908cb296473dfdf6bc72baa34
-default.com-microchip-mplab-mdbcore-PICKit3Tool-PICkit3DbgToolManager.md5=50072f33d27b72924000ca2dca4b7622
-com-microchip-mplab-nbide-embedded-makeproject-MakeProject.md5=e62346c0c0ecee2637e613b49cb7b7fa
-proj.dir=F\:\\library\\source\\WZYXPCR_NO1.20250726.X\\WZYXPCR_NO1.20250726.X
-host.platform=windows
-default.com-microchip-mplab-nbide-toolchain-xc16-XC16LanguageToolchain.md5=07f7da95e66d00aa4668de5175f752c5

WZYXPCR_NO1.20250726.X/WZYXPCR_NO1.20250726.X/nbproject/Makefile-impl.mk

@@ -1,69 +0,0 @@
-#
-# Generated Makefile - do not edit!
-#
-# Edit the Makefile in the project folder instead (../Makefile). Each target
-# has a pre- and a post- target defined where you can add customization code.
-#
-# This makefile implements macros and targets common to all configurations.
-#
-# NOCDDL
-
-
-# Building and Cleaning subprojects are done by default, but can be controlled with the SUB
-# macro. If SUB=no, subprojects will not be built or cleaned. The following macro
-# statements set BUILD_SUB-CONF and CLEAN_SUB-CONF to .build-reqprojects-conf
-# and .clean-reqprojects-conf unless SUB has the value 'no'
-SUB_no=NO
-SUBPROJECTS=${SUB_${SUB}}
-BUILD_SUBPROJECTS_=.build-subprojects
-BUILD_SUBPROJECTS_NO=
-BUILD_SUBPROJECTS=${BUILD_SUBPROJECTS_${SUBPROJECTS}}
-CLEAN_SUBPROJECTS_=.clean-subprojects
-CLEAN_SUBPROJECTS_NO=
-CLEAN_SUBPROJECTS=${CLEAN_SUBPROJECTS_${SUBPROJECTS}}
-
-
-# Project Name
-PROJECTNAME=WZYXPCR_NO1.20250726.X
-
-# Active Configuration
-DEFAULTCONF=default
-CONF=${DEFAULTCONF}
-
-# All Configurations
-ALLCONFS=default 
-
-
-# build
-.build-impl: .build-pre
-	${MAKE} -f nbproject/Makefile-${CONF}.mk SUBPROJECTS=${SUBPROJECTS} .build-conf
-
-
-# clean
-.clean-impl: .clean-pre
-	${MAKE} -f nbproject/Makefile-${CONF}.mk SUBPROJECTS=${SUBPROJECTS} .clean-conf
-
-# clobber
-.clobber-impl: .clobber-pre .depcheck-impl
-	    ${MAKE} SUBPROJECTS=${SUBPROJECTS} CONF=default clean
-
-
-
-# all
-.all-impl: .all-pre .depcheck-impl
-	    ${MAKE} SUBPROJECTS=${SUBPROJECTS} CONF=default build
-
-
-
-# dependency checking support
-.depcheck-impl:
-#	@echo "# This code depends on make tool being used" >.dep.inc
-#	@if [ -n "${MAKE_VERSION}" ]; then \
-#	    echo "DEPFILES=\$$(wildcard \$$(addsuffix .d, \$${OBJECTFILES}))" >>.dep.inc; \
-#	    echo "ifneq (\$${DEPFILES},)" >>.dep.inc; \
-#	    echo "include \$${DEPFILES}" >>.dep.inc; \
-#	    echo "endif" >>.dep.inc; \
-#	else \
-#	    echo ".KEEP_STATE:" >>.dep.inc; \
-#	    echo ".KEEP_STATE_FILE:.make.state.\$${CONF}" >>.dep.inc; \
-#	fi

WZYXPCR_NO1.20250726.X/WZYXPCR_NO1.20250726.X/nbproject/Makefile-local-default.mk

@@ -1,37 +0,0 @@
-#
-# Generated Makefile - do not edit!
-#
-#
-# This file contains information about the location of compilers and other tools.
-# If you commmit this file into your revision control server, you will be able to 
-# to checkout the project and build it from the command line with make. However,
-# if more than one person works on the same project, then this file might show
-# conflicts since different users are bound to have compilers in different places.
-# In that case you might choose to not commit this file and let MPLAB X recreate this file
-# for each user. The disadvantage of not commiting this file is that you must run MPLAB X at
-# least once so the file gets created and the project can be built. Finally, you can also
-# avoid using this file at all if you are only building from the command line with make.
-# You can invoke make with the values of the macros:
-# $ makeMP_CC="/opt/microchip/mplabc30/v3.30c/bin/pic30-gcc" ...  
-#
-SHELL=cmd.exe
-PATH_TO_IDE_BIN=C:/Program Files/Microchip/MPLABX/v6.15/mplab_platform/platform/../mplab_ide/modules/../../bin/
-# Adding MPLAB X bin directory to path.
-PATH:=C:/Program Files/Microchip/MPLABX/v6.15/mplab_platform/platform/../mplab_ide/modules/../../bin/:$(PATH)
-# Path to java used to run MPLAB X when this makefile was created
-MP_JAVA_PATH="C:\Program Files\Microchip\MPLABX\v6.15\sys\java\zulu8.64.0.19-ca-fx-jre8.0.345-win_x64/bin/"
-OS_CURRENT="$(shell uname -s)"
-MP_CC="C:\Program Files\Microchip\xc16\v2.10\bin\xc16-gcc.exe"
-# MP_CPPC is not defined
-# MP_BC is not defined
-MP_AS="C:\Program Files\Microchip\xc16\v2.10\bin\xc16-as.exe"
-MP_LD="C:\Program Files\Microchip\xc16\v2.10\bin\xc16-ld.exe"
-MP_AR="C:\Program Files\Microchip\xc16\v2.10\bin\xc16-ar.exe"
-DEP_GEN=${MP_JAVA_PATH}java -jar "C:/Program Files/Microchip/MPLABX/v6.15/mplab_platform/platform/../mplab_ide/modules/../../bin/extractobjectdependencies.jar"
-MP_CC_DIR="C:\Program Files\Microchip\xc16\v2.10\bin"
-# MP_CPPC_DIR is not defined
-# MP_BC_DIR is not defined
-MP_AS_DIR="C:\Program Files\Microchip\xc16\v2.10\bin"
-MP_LD_DIR="C:\Program Files\Microchip\xc16\v2.10\bin"
-MP_AR_DIR="C:\Program Files\Microchip\xc16\v2.10\bin"
-DFP_DIR=C:/Users/onechip/.mchp_packs/Microchip/dsPIC33E-GM-GP-MC-GU-MU_DFP/1.0.23

WZYXPCR_NO1.20250726.X/WZYXPCR_NO1.20250726.X/nbproject/Makefile-variables.mk

@@ -1,10 +0,0 @@
-#
-# Generated - do not edit!
-#
-# NOCDDL
-#
-CND_BASEDIR=`pwd`
-# default configuration
-CND_ARTIFACT_DIR_default=dist/default/production
-CND_ARTIFACT_NAME_default=WZYXPCR_NO1.20250726.X.production.hex
-CND_ARTIFACT_PATH_default=dist/default/production/WZYXPCR_NO1.20250726.X.production.hex

WZYXPCR_NO1.20250726.X/WZYXPCR_NO1.20250726.X/nbproject/Package-default.bash

@@ -1,73 +0,0 @@
-#!/bin/bash -x
-
-#
-# Generated - do not edit!
-#
-
-# Macros
-TOP=`pwd`
-CND_CONF=default
-CND_DISTDIR=dist
-TMPDIR=build/${CND_CONF}/${IMAGE_TYPE}/tmp-packaging
-TMPDIRNAME=tmp-packaging
-OUTPUT_PATH=dist/${CND_CONF}/${IMAGE_TYPE}/WZYXPCR_NO1.20250726.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}
-OUTPUT_BASENAME=WZYXPCR_NO1.20250726.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}
-PACKAGE_TOP_DIR=wzyxpcrno1.20250726.x/
-
-# Functions
-function checkReturnCode
-{
-    rc=$?
-    if [ $rc != 0 ]
-    then
-        exit $rc
-    fi
-}
-function makeDirectory
-# $1 directory path
-# $2 permission (optional)
-{
-    mkdir -p "$1"
-    checkReturnCode
-    if [ "$2" != "" ]
-    then
-      chmod $2 "$1"
-      checkReturnCode
-    fi
-}
-function copyFileToTmpDir
-# $1 from-file path
-# $2 to-file path
-# $3 permission
-{
-    cp "$1" "$2"
-    checkReturnCode
-    if [ "$3" != "" ]
-    then
-        chmod $3 "$2"
-        checkReturnCode
-    fi
-}
-
-# Setup
-cd "${TOP}"
-mkdir -p ${CND_DISTDIR}/${CND_CONF}/package
-rm -rf ${TMPDIR}
-mkdir -p ${TMPDIR}
-
-# Copy files and create directories and links
-cd "${TOP}"
-makeDirectory ${TMPDIR}/wzyxpcrno1.20250726.x/bin
-copyFileToTmpDir "${OUTPUT_PATH}" "${TMPDIR}/${PACKAGE_TOP_DIR}bin/${OUTPUT_BASENAME}" 0755
-
-
-# Generate tar file
-cd "${TOP}"
-rm -f ${CND_DISTDIR}/${CND_CONF}/package/wzyxpcrno1.20250726.x.tar
-cd ${TMPDIR}
-tar -vcf ../../../../${CND_DISTDIR}/${CND_CONF}/package/wzyxpcrno1.20250726.x.tar *
-checkReturnCode
-
-# Cleanup
-cd "${TOP}"
-rm -rf ${TMPDIR}

WZYXPCR_NO1.20250726.X/WZYXPCR_NO1.20250726.X/nbproject/configurations.xml

@@ -1,433 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<configurationDescriptor version="65">
-  <logicalFolder name="root" displayName="root" projectFiles="true">
-    <logicalFolder name="HeaderFiles" displayName="头文件" projectFiles="true">
-      <itemPath>file/ABIS_User.h</itemPath>
-      <itemPath>file/Ad.h</itemPath>
-      <itemPath>file/DA7512.h</itemPath>
-      <itemPath>file/Delay.h</itemPath>
-      <itemPath>file/DMA.h</itemPath>
-      <itemPath>file/DS1802.h</itemPath>
-      <itemPath>file/EEPROM.h</itemPath>
-      <itemPath>file/Interrupt.h</itemPath>
-      <itemPath>file/Motor.h</itemPath>
-      <itemPath>file/OC.h</itemPath>
-      <itemPath>file/PIN.h</itemPath>
-      <itemPath>file/PWM.h</itemPath>
-      <itemPath>file/Timer.h</itemPath>
-      <itemPath>file/Uart.h</itemPath>
-      <itemPath>file/Dac5571.h</itemPath>
-    </logicalFolder>
-    <logicalFolder name="SourceFiles" displayName="源文件" projectFiles="true">
-      <itemPath>file/ABIS_User.c</itemPath>
-      <itemPath>file/Ad.c</itemPath>
-      <itemPath>file/Da7512.c</itemPath>
-      <itemPath>file/Delay.c</itemPath>
-      <itemPath>file/DMA.c</itemPath>
-      <itemPath>file/DS1802.c</itemPath>
-      <itemPath>file/Interrupt.c</itemPath>
-      <itemPath>file/EEPROM.c</itemPath>
-      <itemPath>file/main.c</itemPath>
-      <itemPath>file/Motor.c</itemPath>
-      <itemPath>file/OC.c</itemPath>
-      <itemPath>file/PIN.c</itemPath>
-      <itemPath>file/PWM.c</itemPath>
-      <itemPath>file/readme.c</itemPath>
-      <itemPath>file/Timer.c</itemPath>
-      <itemPath>file/Uart.c</itemPath>
-      <itemPath>file/Dac5571.c</itemPath>
-    </logicalFolder>
-    <logicalFolder name="LinkerScript" displayName="链接器文件" projectFiles="true">
-    </logicalFolder>
-    <logicalFolder name="ExternalFiles" displayName="重要文件" projectFiles="false">
-      <itemPath>Makefile</itemPath>
-    </logicalFolder>
-  </logicalFolder>
-  <sourceRootList>
-    <Elem>file</Elem>
-  </sourceRootList>
-  <projectmakefile>Makefile</projectmakefile>
-  <confs>
-    <conf name="default" type="2">
-      <toolsSet>
-        <developmentServer>localhost</developmentServer>
-        <targetDevice>dsPIC33EP512MU814</targetDevice>
-        <targetHeader></targetHeader>
-        <targetPluginBoard></targetPluginBoard>
-        <platformTool>PICkit3PlatformTool</platformTool>
-        <languageToolchain>XC16</languageToolchain>
-        <languageToolchainVersion>2.10</languageToolchainVersion>
-        <platform>3</platform>
-      </toolsSet>
-      <packs>
-        <pack name="dsPIC33E-GM-GP-MC-GU-MU_DFP" vendor="Microchip" version="1.0.23"/>
-      </packs>
-      <ScriptingSettings>
-      </ScriptingSettings>
-      <compileType>
-        <linkerTool>
-          <linkerLibItems>
-          </linkerLibItems>
-        </linkerTool>
-        <archiverTool>
-        </archiverTool>
-        <loading>
-          <useAlternateLoadableFile>false</useAlternateLoadableFile>
-          <parseOnProdLoad>false</parseOnProdLoad>
-          <alternateLoadableFile></alternateLoadableFile>
-        </loading>
-        <subordinates>
-        </subordinates>
-      </compileType>
-      <makeCustomizationType>
-        <makeCustomizationPreStepEnabled>false</makeCustomizationPreStepEnabled>
-        <makeUseCleanTarget>false</makeUseCleanTarget>
-        <makeCustomizationPreStep></makeCustomizationPreStep>
-        <makeCustomizationPostStepEnabled>false</makeCustomizationPostStepEnabled>
-        <makeCustomizationPostStep></makeCustomizationPostStep>
-        <makeCustomizationPutChecksumInUserID>false</makeCustomizationPutChecksumInUserID>
-        <makeCustomizationEnableLongLines>false</makeCustomizationEnableLongLines>
-        <makeCustomizationNormalizeHexFile>false</makeCustomizationNormalizeHexFile>
-      </makeCustomizationType>
-      <C30>
-        <property key="cast-align" value="false"/>
-        <property key="code-model" value="default"/>
-        <property key="const-model" value="default"/>
-        <property key="data-model" value="default"/>
-        <property key="disable-instruction-scheduling" value="false"/>
-        <property key="enable-all-warnings" value="true"/>
-        <property key="enable-ansi-std" value="false"/>
-        <property key="enable-ansi-warnings" value="false"/>
-        <property key="enable-fatal-warnings" value="false"/>
-        <property key="enable-large-arrays" value="false"/>
-        <property key="enable-omit-frame-pointer" value="false"/>
-        <property key="enable-procedural-abstraction" value="false"/>
-        <property key="enable-short-double" value="false"/>
-        <property key="enable-symbols" value="true"/>
-        <property key="enable-unroll-loops" value="false"/>
-        <property key="expand-pragma-config" value="false"/>
-        <property key="extra-include-directories" value=""/>
-        <property key="isolate-each-function" value="false"/>
-        <property key="keep-inline" value="false"/>
-        <property key="oXC16gcc-align-arr" value="false"/>
-        <property key="oXC16gcc-cnsts-mauxflash" value="false"/>
-        <property key="oXC16gcc-data-sects" value="false"/>
-        <property key="oXC16gcc-errata" value=""/>
-        <property key="oXC16gcc-fillupper" value=""/>
-        <property key="oXC16gcc-large-aggregate" value="false"/>
-        <property key="oXC16gcc-mauxflash" value="false"/>
-        <property key="oXC16gcc-mpa-lvl" value=""/>
-        <property key="oXC16gcc-name-text-sec" value=""/>
-        <property key="oXC16gcc-near-chars" value="false"/>
-        <property key="oXC16gcc-no-isr-warn" value="false"/>
-        <property key="oXC16gcc-sfr-warn" value="false"/>
-        <property key="oXC16gcc-smar-io-lvl" value="1"/>
-        <property key="oXC16gcc-smart-io-fmt" value=""/>
-        <property key="optimization-level" value="0"/>
-        <property key="post-instruction-scheduling" value="default"/>
-        <property key="pre-instruction-scheduling" value="default"/>
-        <property key="preprocessor-macros" value=""/>
-        <property key="scalar-model" value="default"/>
-        <property key="use-cci" value="false"/>
-        <property key="use-iar" value="false"/>
-      </C30>
-      <C30-AR>
-        <property key="additional-options-chop-files" value="false"/>
-      </C30-AR>
-      <C30-AS>
-        <property key="assembler-symbols" value=""/>
-        <property key="expand-macros" value="false"/>
-        <property key="extra-include-directories-for-assembler" value=""/>
-        <property key="extra-include-directories-for-preprocessor" value=""/>
-        <property key="false-conditionals" value="false"/>
-        <property key="keep-locals" value="false"/>
-        <property key="list-assembly" value="false"/>
-        <property key="list-section-info" value="false"/>
-        <property key="list-source" value="false"/>
-        <property key="list-symbols" value="false"/>
-        <property key="oXC16asm-extra-opts" value=""/>
-        <property key="oXC16asm-list-to-file" value="false"/>
-        <property key="omit-debug-dirs" value="false"/>
-        <property key="omit-forms" value="false"/>
-        <property key="preprocessor-macros" value=""/>
-        <property key="relax" value="false"/>
-        <property key="warning-level" value="emit-warnings"/>
-      </C30-AS>
-      <C30-CO>
-        <property key="coverage-enable" value=""/>
-        <property key="stack-guidance" value="false"/>
-      </C30-CO>
-      <C30-LD>
-        <property key="additional-options-use-response-files" value="false"/>
-        <property key="boot-eeprom" value="no_eeprom"/>
-        <property key="boot-flash" value="no_flash"/>
-        <property key="boot-ram" value="no_ram"/>
-        <property key="boot-write-protect" value="no_write_protect"/>
-        <property key="enable-check-sections" value="false"/>
-        <property key="enable-data-init" value="true"/>
-        <property key="enable-default-isr" value="true"/>
-        <property key="enable-handles" value="true"/>
-        <property key="enable-pack-data" value="true"/>
-        <property key="extra-lib-directories" value=""/>
-        <property key="fill-flash-options-addr" value=""/>
-        <property key="fill-flash-options-const" value=""/>
-        <property key="fill-flash-options-how" value="0"/>
-        <property key="fill-flash-options-inc-const" value="1"/>
-        <property key="fill-flash-options-increment" value=""/>
-        <property key="fill-flash-options-seq" value=""/>
-        <property key="fill-flash-options-what" value="0"/>
-        <property key="general-code-protect" value="no_code_protect"/>
-        <property key="general-write-protect" value="no_write_protect"/>
-        <property key="generate-cross-reference-file" value="false"/>
-        <property key="heap-size" value=""/>
-        <property key="input-libraries" value=""/>
-        <property key="linker-stack" value="true"/>
-        <property key="linker-symbols" value=""/>
-        <property key="map-file" value="${DISTDIR}/${PROJECTNAME}.${IMAGE_TYPE}.map"/>
-        <property key="no-ivt" value="false"/>
-        <property key="oXC16ld-extra-opts" value=""/>
-        <property key="oXC16ld-fill-upper" value="0"/>
-        <property key="oXC16ld-force-link" value="false"/>
-        <property key="oXC16ld-no-smart-io" value="false"/>
-        <property key="oXC16ld-nostdlib" value="false"/>
-        <property key="oXC16ld-stackguard" value="16"/>
-        <property key="preprocessor-macros" value=""/>
-        <property key="remove-unused-sections" value="false"/>
-        <property key="report-memory-usage" value="true"/>
-        <property key="secure-eeprom" value="no_eeprom"/>
-        <property key="secure-flash" value="no_flash"/>
-        <property key="secure-ram" value="no_ram"/>
-        <property key="secure-write-protect" value="no_write_protect"/>
-        <property key="stack-size" value="16"/>
-        <property key="symbol-stripping" value=""/>
-        <property key="trace-symbols" value=""/>
-        <property key="warn-section-align" value="false"/>
-      </C30-LD>
-      <C30Global>
-        <property key="combine-sourcefiles" value="false"/>
-        <property key="common-include-directories" value=""/>
-        <property key="dual-boot-partition" value="0"/>
-        <property key="fast-math" value="false"/>
-        <property key="generic-16-bit" value="false"/>
-        <property key="legacy-libc" value="true"/>
-        <property key="mpreserve-all" value="false"/>
-        <property key="oXC16glb-macros" value=""/>
-        <property key="omit-pack-options" value="1"/>
-        <property key="output-file-format" value="elf"/>
-        <property key="preserve-all" value="false"/>
-        <property key="preserve-file" value=""/>
-        <property key="relaxed-math" value="false"/>
-        <property key="save-temps" value="false"/>
-      </C30Global>
-      <PICkit3PlatformTool>
-        <property key="ADC 1" value="true"/>
-        <property key="ADC 2" value="true"/>
-        <property key="AutoSelectMemRanges" value="auto"/>
-        <property key="COMPARATOR" value="true"/>
-        <property key="CRC" value="true"/>
-        <property key="DCI" value="true"/>
-        <property key="Freeze All Other Peripherals" value="true"/>
-        <property key="I2C1" value="true"/>
-        <property key="I2C2" value="true"/>
-        <property key="INPUT CAPTURE 1" value="true"/>
-        <property key="INPUT CAPTURE 10" value="true"/>
-        <property key="INPUT CAPTURE 11" value="true"/>
-        <property key="INPUT CAPTURE 12" value="true"/>
-        <property key="INPUT CAPTURE 13" value="true"/>
-        <property key="INPUT CAPTURE 14" value="true"/>
-        <property key="INPUT CAPTURE 15" value="true"/>
-        <property key="INPUT CAPTURE 16" value="true"/>
-        <property key="INPUT CAPTURE 2" value="true"/>
-        <property key="INPUT CAPTURE 3" value="true"/>
-        <property key="INPUT CAPTURE 4" value="true"/>
-        <property key="INPUT CAPTURE 5" value="true"/>
-        <property key="INPUT CAPTURE 6" value="true"/>
-        <property key="INPUT CAPTURE 7" value="true"/>
-        <property key="INPUT CAPTURE 8" value="true"/>
-        <property key="INPUT CAPTURE 9" value="true"/>
-        <property key="OUTPUT COMPARE 1" value="true"/>
-        <property key="OUTPUT COMPARE 10" value="true"/>
-        <property key="OUTPUT COMPARE 11" value="true"/>
-        <property key="OUTPUT COMPARE 12" value="true"/>
-        <property key="OUTPUT COMPARE 13" value="true"/>
-        <property key="OUTPUT COMPARE 14" value="true"/>
-        <property key="OUTPUT COMPARE 15" value="true"/>
-        <property key="OUTPUT COMPARE 16" value="true"/>
-        <property key="OUTPUT COMPARE 2" value="true"/>
-        <property key="OUTPUT COMPARE 3" value="true"/>
-        <property key="OUTPUT COMPARE 4" value="true"/>
-        <property key="OUTPUT COMPARE 5" value="true"/>
-        <property key="OUTPUT COMPARE 6" value="true"/>
-        <property key="OUTPUT COMPARE 7" value="true"/>
-        <property key="OUTPUT COMPARE 8" value="true"/>
-        <property key="OUTPUT COMPARE 9" value="true"/>
-        <property key="PARALLEL MASTER/SLAVE PORT" value="true"/>
-        <property key="PWM" value="true"/>
-        <property key="REAL TIME CLOCK AND CALENDAR" value="true"/>
-        <property key="SPI 1" value="true"/>
-        <property key="SPI 2" value="true"/>
-        <property key="SPI 3" value="true"/>
-        <property key="SPI 4" value="true"/>
-        <property key="SecureSegment.SegmentProgramming" value="FullChipProgramming"/>
-        <property key="TIMER1" value="true"/>
-        <property key="TIMER2" value="true"/>
-        <property key="TIMER3" value="true"/>
-        <property key="TIMER4" value="true"/>
-        <property key="TIMER5" value="true"/>
-        <property key="TIMER6" value="true"/>
-        <property key="TIMER7" value="true"/>
-        <property key="TIMER8" value="true"/>
-        <property key="TIMER9" value="true"/>
-        <property key="ToolFirmwareFilePath"
-                  value="Press to browse for a specific firmware version"/>
-        <property key="ToolFirmwareOption.UseLatestFirmware" value="true"/>
-        <property key="UART 1" value="true"/>
-        <property key="UART 2" value="true"/>
-        <property key="UART 3" value="true"/>
-        <property key="UART 4" value="true"/>
-        <property key="USB" value="true"/>
-        <property key="debugoptions.debug-startup" value="Use system settings"/>
-        <property key="debugoptions.reset-behaviour" value="Use system settings"/>
-        <property key="debugoptions.useswbreakpoints" value="false"/>
-        <property key="event.recorder.enabled" value="false"/>
-        <property key="event.recorder.scvd.files" value=""/>
-        <property key="hwtoolclock.frcindebug" value="false"/>
-        <property key="lastid" value=""/>
-        <property key="memories.aux" value="false"/>
-        <property key="memories.bootflash" value="true"/>
-        <property key="memories.configurationmemory" value="true"/>
-        <property key="memories.configurationmemory2" value="true"/>
-        <property key="memories.dataflash" value="true"/>
-        <property key="memories.eeprom" value="true"/>
-        <property key="memories.flashdata" value="true"/>
-        <property key="memories.id" value="true"/>
-        <property key="memories.instruction.ram" value="true"/>
-        <property key="memories.instruction.ram.ranges"
-                  value="${memories.instruction.ram.ranges}"/>
-        <property key="memories.programmemory" value="true"/>
-        <property key="memories.programmemory.ranges" value="0-7fffff"/>
-        <property key="poweroptions.powerenable" value="true"/>
-        <property key="programmertogo.imagename" value=""/>
-        <property key="programoptions.donoteraseauxmem" value="false"/>
-        <property key="programoptions.eraseb4program" value="true"/>
-        <property key="programoptions.pgmspeed" value="2"/>
-        <property key="programoptions.preservedataflash" value="false"/>
-        <property key="programoptions.preservedataflash.ranges"
-                  value="${programoptions.preservedataflash.ranges}"/>
-        <property key="programoptions.preserveeeprom" value="false"/>
-        <property key="programoptions.preserveeeprom.ranges" value=""/>
-        <property key="programoptions.preserveprogram.ranges" value=""/>
-        <property key="programoptions.preserveprogramrange" value="false"/>
-        <property key="programoptions.preserveuserid" value="false"/>
-        <property key="programoptions.programcalmem" value="false"/>
-        <property key="programoptions.programuserotp" value="false"/>
-        <property key="programoptions.testmodeentrymethod" value="VDDFirst"/>
-        <property key="programoptions.usehighvoltageonmclr" value="false"/>
-        <property key="programoptions.uselvpprogramming" value="false"/>
-        <property key="voltagevalue" value="3.25"/>
-      </PICkit3PlatformTool>
-      <Tool>
-        <property key="ADC 1" value="true"/>
-        <property key="ADC 2" value="true"/>
-        <property key="AutoSelectMemRanges" value="auto"/>
-        <property key="COMPARATOR" value="true"/>
-        <property key="CRC" value="true"/>
-        <property key="DCI" value="true"/>
-        <property key="I2C1" value="true"/>
-        <property key="I2C2" value="true"/>
-        <property key="INPUT CAPTURE 1" value="true"/>
-        <property key="INPUT CAPTURE 10" value="true"/>
-        <property key="INPUT CAPTURE 11" value="true"/>
-        <property key="INPUT CAPTURE 12" value="true"/>
-        <property key="INPUT CAPTURE 13" value="true"/>
-        <property key="INPUT CAPTURE 14" value="true"/>
-        <property key="INPUT CAPTURE 15" value="true"/>
-        <property key="INPUT CAPTURE 16" value="true"/>
-        <property key="INPUT CAPTURE 2" value="true"/>
-        <property key="INPUT CAPTURE 3" value="true"/>
-        <property key="INPUT CAPTURE 4" value="true"/>
-        <property key="INPUT CAPTURE 5" value="true"/>
-        <property key="INPUT CAPTURE 6" value="true"/>
-        <property key="INPUT CAPTURE 7" value="true"/>
-        <property key="INPUT CAPTURE 8" value="true"/>
-        <property key="INPUT CAPTURE 9" value="true"/>
-        <property key="OUTPUT COMPARE 1" value="true"/>
-        <property key="OUTPUT COMPARE 10" value="true"/>
-        <property key="OUTPUT COMPARE 11" value="true"/>
-        <property key="OUTPUT COMPARE 12" value="true"/>
-        <property key="OUTPUT COMPARE 13" value="true"/>
-        <property key="OUTPUT COMPARE 14" value="true"/>
-        <property key="OUTPUT COMPARE 15" value="true"/>
-        <property key="OUTPUT COMPARE 16" value="true"/>
-        <property key="OUTPUT COMPARE 2" value="true"/>
-        <property key="OUTPUT COMPARE 3" value="true"/>
-        <property key="OUTPUT COMPARE 4" value="true"/>
-        <property key="OUTPUT COMPARE 5" value="true"/>
-        <property key="OUTPUT COMPARE 6" value="true"/>
-        <property key="OUTPUT COMPARE 7" value="true"/>
-        <property key="OUTPUT COMPARE 8" value="true"/>
-        <property key="OUTPUT COMPARE 9" value="true"/>
-        <property key="PARALLEL MASTER/SLAVE PORT" value="true"/>
-        <property key="PWM" value="true"/>
-        <property key="REAL TIME CLOCK AND CALENDAR" value="true"/>
-        <property key="SPI 1" value="true"/>
-        <property key="SPI 2" value="true"/>
-        <property key="SPI 3" value="true"/>
-        <property key="SPI 4" value="true"/>
-        <property key="TIMER1" value="true"/>
-        <property key="TIMER2" value="true"/>
-        <property key="TIMER3" value="true"/>
-        <property key="TIMER4" value="true"/>
-        <property key="TIMER5" value="true"/>
-        <property key="TIMER6" value="true"/>
-        <property key="TIMER7" value="true"/>
-        <property key="TIMER8" value="true"/>
-        <property key="TIMER9" value="true"/>
-        <property key="ToolFirmwareFilePath"
-                  value="Press to browse for a specific firmware version"/>
-        <property key="ToolFirmwareOption.UseLatestFirmware" value="true"/>
-        <property key="UART 1" value="true"/>
-        <property key="UART 2" value="true"/>
-        <property key="UART 3" value="true"/>
-        <property key="UART 4" value="true"/>
-        <property key="USB" value="true"/>
-        <property key="debugoptions.useswbreakpoints" value="false"/>
-        <property key="hwtoolclock.frcindebug" value="false"/>
-        <property key="memories.aux" value="false"/>
-        <property key="memories.bootflash" value="true"/>
-        <property key="memories.configurationmemory" value="true"/>
-        <property key="memories.configurationmemory2" value="true"/>
-        <property key="memories.dataflash" value="true"/>
-        <property key="memories.eeprom" value="true"/>
-        <property key="memories.flashdata" value="true"/>
-        <property key="memories.id" value="true"/>
-        <property key="memories.instruction.ram" value="true"/>
-        <property key="memories.instruction.ram.ranges"
-                  value="${memories.instruction.ram.ranges}"/>
-        <property key="memories.programmemory" value="true"/>
-        <property key="memories.programmemory.ranges" value="0-7fffff"/>
-        <property key="poweroptions.powerenable" value="true"/>
-        <property key="programmertogo.imagename" value=""/>
-        <property key="programoptions.donoteraseauxmem" value="false"/>
-        <property key="programoptions.eraseb4program" value="true"/>
-        <property key="programoptions.pgmspeed" value="2"/>
-        <property key="programoptions.preservedataflash" value="false"/>
-        <property key="programoptions.preservedataflash.ranges"
-                  value="${programoptions.preservedataflash.ranges}"/>
-        <property key="programoptions.preserveeeprom" value="false"/>
-        <property key="programoptions.preserveeeprom.ranges" value=""/>
-        <property key="programoptions.preserveprogram.ranges" value=""/>
-        <property key="programoptions.preserveprogramrange" value="false"/>
-        <property key="programoptions.preserveuserid" value="false"/>
-        <property key="programoptions.programcalmem" value="false"/>
-        <property key="programoptions.programuserotp" value="false"/>
-        <property key="programoptions.testmodeentrymethod" value="VDDFirst"/>
-        <property key="programoptions.usehighvoltageonmclr" value="false"/>
-        <property key="programoptions.uselvpprogramming" value="false"/>
-        <property key="voltagevalue" value="3.25"/>
-        <property key="冻结所有其他外设" value="true"/>
-        <property key="安全段。分部编程" value="FullChipProgramming"/>
-      </Tool>
-    </conf>
-  </confs>
-</configurationDescriptor>

WZYXPCR_NO1.20250726.X/WZYXPCR_NO1.20250726.X/nbproject/private/SuppressibleMessageMemo.properties

@@ -1,3 +0,0 @@
-#
-#Mon Jun 26 09:11:29 CST 2023
-pk3/DEVID_MISMATCH=true

WZYXPCR_NO1.20250726.X/WZYXPCR_NO1.20250726.X/nbproject/private/configurations.xml

@@ -1,25 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<configurationDescriptor version="65">
-  <projectmakefile>Makefile</projectmakefile>
-  <defaultConf>0</defaultConf>
-  <confs>
-    <conf name="default" type="2">
-      <platformToolSN>:=MPLABComm-USB-Microchip:=&lt;vid>04D8:=&lt;pid>900A:=&lt;rev>0002:=&lt;man>Microchip Technology Inc.:=&lt;prod>PICkit 3:=&lt;sn>DEFAULT_PK3 :=&lt;drv>x:=&lt;xpt>h:=end</platformToolSN>
-      <languageToolchainDir>C:\Program Files\Microchip\xc16\v2.10\bin</languageToolchainDir>
-      <mdbdebugger version="1">
-        <placeholder1>place holder 1</placeholder1>
-        <placeholder2>place holder 2</placeholder2>
-      </mdbdebugger>
-      <runprofile version="6">
-        <args></args>
-        <rundir></rundir>
-        <buildfirst>true</buildfirst>
-        <console-type>0</console-type>
-        <terminal-type>0</terminal-type>
-        <remove-instrumentation>0</remove-instrumentation>
-        <environment>
-        </environment>
-      </runprofile>
-    </conf>
-  </confs>
-</configurationDescriptor>

WZYXPCR_NO1.20250726.X/WZYXPCR_NO1.20250726.X/nbproject/private/private.xml

@@ -1,15 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<project-private xmlns="http://www.netbeans.org/ns/project-private/1">
-    <editor-bookmarks xmlns="http://www.netbeans.org/ns/editor-bookmarks/2" lastBookmarkId="0"/>
-    <open-files xmlns="http://www.netbeans.org/ns/projectui-open-files/2">
-        <group/>
-        <group name="source">
-            <file>file:/F:/library/source/WZYXPCR_NO1.20250726.X/WZYXPCR_NO1.20250726.X/file/Uart.c</file>
-            <file>file:/F:/library/source/WZYXPCR_NO1.20250726.X/WZYXPCR_NO1.20250726.X/file/Delay.c</file>
-            <file>file:/F:/library/source/WZYXPCR_NO1.20250726.X/WZYXPCR_NO1.20250726.X/file/DS1802.c</file>
-            <file>file:/F:/library/source/WZYXPCR_NO1.20250726.X/WZYXPCR_NO1.20250726.X/file/Uart.h</file>
-            <file>file:/F:/library/source/WZYXPCR_NO1.20250726.X/WZYXPCR_NO1.20250726.X/file/main.c</file>
-            <file>file:/F:/library/source/WZYXPCR_NO1.20250726.X/WZYXPCR_NO1.20250726.X/file/EEPROM.c</file>
-        </group>
-    </open-files>
-</project-private>

WZYXPCR_NO1.20250726.X/WZYXPCR_NO1.20250726.X/nbproject/project.xml

@@ -1,29 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<project xmlns="http://www.netbeans.org/ns/project/1">
-    <type>com.microchip.mplab.nbide.embedded.makeproject</type>
-    <configuration>
-        <data xmlns="http://www.netbeans.org/ns/make-project/1">
-            <name>WZYXPCR_NO1.20250726</name>
-            <creation-uuid>52350a44-b23e-415c-bde5-da05c8ddbc92</creation-uuid>
-            <make-project-type>0</make-project-type>
-            <c-extensions>c</c-extensions>
-            <cpp-extensions/>
-            <header-extensions>h</header-extensions>
-            <asminc-extensions/>
-            <sourceEncoding>GB2312</sourceEncoding>
-            <make-dep-projects/>
-            <sourceRootList>
-                <sourceRootElem>file</sourceRootElem>
-            </sourceRootList>
-            <confList>
-                <confElem>
-                    <name>default</name>
-                    <type>2</type>
-                </confElem>
-            </confList>
-            <formatting>
-                <project-formatting-style>false</project-formatting-style>
-            </formatting>
-        </data>
-    </configuration>
-</project>

WZYX_UART_V1.1250726.X/WZYX_UART_V1.1250726.X/Makefile

@@ -1,113 +0,0 @@
-#
-#  There exist several targets which are by default empty and which can be 
-#  used for execution of your targets. These targets are usually executed 
-#  before and after some main targets. They are: 
-#
-#     .build-pre:              called before 'build' target
-#     .build-post:             called after 'build' target
-#     .clean-pre:              called before 'clean' target
-#     .clean-post:             called after 'clean' target
-#     .clobber-pre:            called before 'clobber' target
-#     .clobber-post:           called after 'clobber' target
-#     .all-pre:                called before 'all' target
-#     .all-post:               called after 'all' target
-#     .help-pre:               called before 'help' target
-#     .help-post:              called after 'help' target
-#
-#  Targets beginning with '.' are not intended to be called on their own.
-#
-#  Main targets can be executed directly, and they are:
-#  
-#     build                    build a specific configuration
-#     clean                    remove built files from a configuration
-#     clobber                  remove all built files
-#     all                      build all configurations
-#     help                     print help mesage
-#  
-#  Targets .build-impl, .clean-impl, .clobber-impl, .all-impl, and
-#  .help-impl are implemented in nbproject/makefile-impl.mk.
-#
-#  Available make variables:
-#
-#     CND_BASEDIR                base directory for relative paths
-#     CND_DISTDIR                default top distribution directory (build artifacts)
-#     CND_BUILDDIR               default top build directory (object files, ...)
-#     CONF                       name of current configuration
-#     CND_ARTIFACT_DIR_${CONF}   directory of build artifact (current configuration)
-#     CND_ARTIFACT_NAME_${CONF}  name of build artifact (current configuration)
-#     CND_ARTIFACT_PATH_${CONF}  path to build artifact (current configuration)
-#     CND_PACKAGE_DIR_${CONF}    directory of package (current configuration)
-#     CND_PACKAGE_NAME_${CONF}   name of package (current configuration)
-#     CND_PACKAGE_PATH_${CONF}   path to package (current configuration)
-#
-# NOCDDL
-
-
-# Environment 
-MKDIR=mkdir
-CP=cp
-CCADMIN=CCadmin
-RANLIB=ranlib
-
-
-# build
-build: .build-post
-
-.build-pre:
-# Add your pre 'build' code here...
-
-.build-post: .build-impl
-# Add your post 'build' code here...
-
-
-# clean
-clean: .clean-post
-
-.clean-pre:
-# Add your pre 'clean' code here...
-# WARNING: the IDE does not call this target since it takes a long time to
-# simply run make. Instead, the IDE removes the configuration directories
-# under build and dist directly without calling make.
-# This target is left here so people can do a clean when running a clean
-# outside the IDE.
-
-.clean-post: .clean-impl
-# Add your post 'clean' code here...
-
-
-# clobber
-clobber: .clobber-post
-
-.clobber-pre:
-# Add your pre 'clobber' code here...
-
-.clobber-post: .clobber-impl
-# Add your post 'clobber' code here...
-
-
-# all
-all: .all-post
-
-.all-pre:
-# Add your pre 'all' code here...
-
-.all-post: .all-impl
-# Add your post 'all' code here...
-
-
-# help
-help: .help-post
-
-.help-pre:
-# Add your pre 'help' code here...
-
-.help-post: .help-impl
-# Add your post 'help' code here...
-
-
-
-# include project implementation makefile
-include nbproject/Makefile-impl.mk
-
-# include project make variables
-include nbproject/Makefile-variables.mk

WZYX_UART_V1.1250726.X/WZYX_UART_V1.1250726.X/nbproject/Makefile-default.mk

@@ -1,189 +0,0 @@
-#
-# Generated Makefile - do not edit!
-#
-# Edit the Makefile in the project folder instead (../Makefile). Each target
-# has a -pre and a -post target defined where you can add customized code.
-#
-# This makefile implements configuration specific macros and targets.
-
-
-# Include project Makefile
-ifeq "${IGNORE_LOCAL}" "TRUE"
-# do not include local makefile. User is passing all local related variables already
-else
-include Makefile
-# Include makefile containing local settings
-ifeq "$(wildcard nbproject/Makefile-local-default.mk)" "nbproject/Makefile-local-default.mk"
-include nbproject/Makefile-local-default.mk
-endif
-endif
-
-# Environment
-MKDIR=gnumkdir -p
-RM=rm -f 
-MV=mv 
-CP=cp 
-
-# Macros
-CND_CONF=default
-ifeq ($(TYPE_IMAGE), DEBUG_RUN)
-IMAGE_TYPE=debug
-OUTPUT_SUFFIX=elf
-DEBUGGABLE_SUFFIX=elf
-FINAL_IMAGE=${DISTDIR}/WZYX_UART_V1.1250726.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}
-else
-IMAGE_TYPE=production
-OUTPUT_SUFFIX=hex
-DEBUGGABLE_SUFFIX=elf
-FINAL_IMAGE=${DISTDIR}/WZYX_UART_V1.1250726.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}
-endif
-
-ifeq ($(COMPARE_BUILD), true)
-COMPARISON_BUILD=-mafrlcsj
-else
-COMPARISON_BUILD=
-endif
-
-# Object Directory
-OBJECTDIR=build/${CND_CONF}/${IMAGE_TYPE}
-
-# Distribution Directory
-DISTDIR=dist/${CND_CONF}/${IMAGE_TYPE}
-
-# Source Files Quoted if spaced
-SOURCEFILES_QUOTED_IF_SPACED=main.c Delay.c Pin.c Uart.c
-
-# Object Files Quoted if spaced
-OBJECTFILES_QUOTED_IF_SPACED=${OBJECTDIR}/main.o ${OBJECTDIR}/Delay.o ${OBJECTDIR}/Pin.o ${OBJECTDIR}/Uart.o
-POSSIBLE_DEPFILES=${OBJECTDIR}/main.o.d ${OBJECTDIR}/Delay.o.d ${OBJECTDIR}/Pin.o.d ${OBJECTDIR}/Uart.o.d
-
-# Object Files
-OBJECTFILES=${OBJECTDIR}/main.o ${OBJECTDIR}/Delay.o ${OBJECTDIR}/Pin.o ${OBJECTDIR}/Uart.o
-
-# Source Files
-SOURCEFILES=main.c Delay.c Pin.c Uart.c
-
-
-
-CFLAGS=
-ASFLAGS=
-LDLIBSOPTIONS=
-
-############# Tool locations ##########################################
-# If you copy a project from one host to another, the path where the  #
-# compiler is installed may be different.                             #
-# If you open this project with MPLAB X in the new host, this         #
-# makefile will be regenerated and the paths will be corrected.       #
-#######################################################################
-# fixDeps replaces a bunch of sed/cat/printf statements that slow down the build
-FIXDEPS=fixDeps
-
-.build-conf:  ${BUILD_SUBPROJECTS}
-ifneq ($(INFORMATION_MESSAGE), )
-	@echo $(INFORMATION_MESSAGE)
-endif
-	${MAKE}  -f nbproject/Makefile-default.mk ${DISTDIR}/WZYX_UART_V1.1250726.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}
-
-MP_PROCESSOR_OPTION=24FJ512GU410
-MP_LINKER_FILE_OPTION=,--script=p24FJ512GU410.gld
-# ------------------------------------------------------------------------------------
-# Rules for buildStep: compile
-ifeq ($(TYPE_IMAGE), DEBUG_RUN)
-${OBJECTDIR}/main.o: main.c  .generated_files/flags/default/7e31da91e93f372a6a336ff10ac41bc3bdfa8577 .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}" 
-	@${RM} ${OBJECTDIR}/main.o.d 
-	@${RM} ${OBJECTDIR}/main.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  main.c  -o ${OBJECTDIR}/main.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/main.o.d"      -g -D__DEBUG -D__MPLAB_DEBUGGER_PK3=1  -mno-eds-warn  -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off    -mdfp="${DFP_DIR}/xc16"
-	
-${OBJECTDIR}/Delay.o: Delay.c  .generated_files/flags/default/32e148f52a230d6a2aa3c1186da3c3ad7ba8af36 .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}" 
-	@${RM} ${OBJECTDIR}/Delay.o.d 
-	@${RM} ${OBJECTDIR}/Delay.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  Delay.c  -o ${OBJECTDIR}/Delay.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/Delay.o.d"      -g -D__DEBUG -D__MPLAB_DEBUGGER_PK3=1  -mno-eds-warn  -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off    -mdfp="${DFP_DIR}/xc16"
-	
-${OBJECTDIR}/Pin.o: Pin.c  .generated_files/flags/default/c8247b692646e347f1e66a38cf91671ecc232e0b .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}" 
-	@${RM} ${OBJECTDIR}/Pin.o.d 
-	@${RM} ${OBJECTDIR}/Pin.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  Pin.c  -o ${OBJECTDIR}/Pin.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/Pin.o.d"      -g -D__DEBUG -D__MPLAB_DEBUGGER_PK3=1  -mno-eds-warn  -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off    -mdfp="${DFP_DIR}/xc16"
-	
-${OBJECTDIR}/Uart.o: Uart.c  .generated_files/flags/default/96cc1f6bf2af8dffa09e9b45fa168e30004c70cb .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}" 
-	@${RM} ${OBJECTDIR}/Uart.o.d 
-	@${RM} ${OBJECTDIR}/Uart.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  Uart.c  -o ${OBJECTDIR}/Uart.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/Uart.o.d"      -g -D__DEBUG -D__MPLAB_DEBUGGER_PK3=1  -mno-eds-warn  -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off    -mdfp="${DFP_DIR}/xc16"
-	
-else
-${OBJECTDIR}/main.o: main.c  .generated_files/flags/default/22e0767ba333a50f3a4c9b485ae2bb3d39fc340f .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}" 
-	@${RM} ${OBJECTDIR}/main.o.d 
-	@${RM} ${OBJECTDIR}/main.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  main.c  -o ${OBJECTDIR}/main.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/main.o.d"      -mno-eds-warn  -g -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off    -mdfp="${DFP_DIR}/xc16"
-	
-${OBJECTDIR}/Delay.o: Delay.c  .generated_files/flags/default/bc1fcc2f658a99ee8463a80e78bf74dad59795b6 .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}" 
-	@${RM} ${OBJECTDIR}/Delay.o.d 
-	@${RM} ${OBJECTDIR}/Delay.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  Delay.c  -o ${OBJECTDIR}/Delay.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/Delay.o.d"      -mno-eds-warn  -g -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off    -mdfp="${DFP_DIR}/xc16"
-	
-${OBJECTDIR}/Pin.o: Pin.c  .generated_files/flags/default/c6825f685ad1b38bc3ffae98478ae3f11670fb87 .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}" 
-	@${RM} ${OBJECTDIR}/Pin.o.d 
-	@${RM} ${OBJECTDIR}/Pin.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  Pin.c  -o ${OBJECTDIR}/Pin.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/Pin.o.d"      -mno-eds-warn  -g -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off    -mdfp="${DFP_DIR}/xc16"
-	
-${OBJECTDIR}/Uart.o: Uart.c  .generated_files/flags/default/934e95c2ae50554c4a605b4f0ddab781ff640b28 .generated_files/flags/default/da39a3ee5e6b4b0d3255bfef95601890afd80709
-	@${MKDIR} "${OBJECTDIR}" 
-	@${RM} ${OBJECTDIR}/Uart.o.d 
-	@${RM} ${OBJECTDIR}/Uart.o 
-	${MP_CC} $(MP_EXTRA_CC_PRE)  Uart.c  -o ${OBJECTDIR}/Uart.o  -c -mcpu=$(MP_PROCESSOR_OPTION)  -MP -MMD -MF "${OBJECTDIR}/Uart.o.d"      -mno-eds-warn  -g -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -O0 -msmart-io=1 -Wall -msfr-warn=off    -mdfp="${DFP_DIR}/xc16"
-	
-endif
-
-# ------------------------------------------------------------------------------------
-# Rules for buildStep: assemble
-ifeq ($(TYPE_IMAGE), DEBUG_RUN)
-else
-endif
-
-# ------------------------------------------------------------------------------------
-# Rules for buildStep: assemblePreproc
-ifeq ($(TYPE_IMAGE), DEBUG_RUN)
-else
-endif
-
-# ------------------------------------------------------------------------------------
-# Rules for buildStep: link
-ifeq ($(TYPE_IMAGE), DEBUG_RUN)
-${DISTDIR}/WZYX_UART_V1.1250726.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}: ${OBJECTFILES}  nbproject/Makefile-${CND_CONF}.mk    
-	@${MKDIR} ${DISTDIR} 
-	${MP_CC} $(MP_EXTRA_LD_PRE)  -o ${DISTDIR}/WZYX_UART_V1.1250726.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}  ${OBJECTFILES_QUOTED_IF_SPACED}      -mcpu=$(MP_PROCESSOR_OPTION)        -D__DEBUG=__DEBUG -D__MPLAB_DEBUGGER_PK3=1  -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)   -mreserve=data@0x800:0x81B -mreserve=data@0x81C:0x81D -mreserve=data@0x81E:0x81F -mreserve=data@0x820:0x821 -mreserve=data@0x822:0x823 -mreserve=data@0x824:0x827 -mreserve=data@0x82A:0x84F   -Wl,--local-stack,,--defsym=__MPLAB_BUILD=1,--defsym=__MPLAB_DEBUG=1,--defsym=__DEBUG=1,-D__DEBUG=__DEBUG,--defsym=__MPLAB_DEBUGGER_PK3=1,$(MP_LINKER_FILE_OPTION),--stack=16,--check-sections,--data-init,--pack-data,--handles,--isr,--no-gc-sections,--fill-upper=0,--stackguard=16,--no-force-link,--smart-io,-Map="${DISTDIR}/${PROJECTNAME}.${IMAGE_TYPE}.map",--report-mem,--memorysummary,${DISTDIR}/memoryfile.xml$(MP_EXTRA_LD_POST)  -mdfp="${DFP_DIR}/xc16" 
-	
-else
-${DISTDIR}/WZYX_UART_V1.1250726.X.${IMAGE_TYPE}.${OUTPUT_SUFFIX}: ${OBJECTFILES}  nbproject/Makefile-${CND_CONF}.mk   
-	@${MKDIR} ${DISTDIR} 
-	${MP_CC} $(MP_EXTRA_LD_PRE)  -o ${DISTDIR}/WZYX_UART_V1.1250726.X.${IMAGE_TYPE}.${DEBUGGABLE_SUFFIX}  ${OBJECTFILES_QUOTED_IF_SPACED}      -mcpu=$(MP_PROCESSOR_OPTION)        -omf=elf -DXPRJ_default=$(CND_CONF)    $(COMPARISON_BUILD)  -Wl,--local-stack,,--defsym=__MPLAB_BUILD=1,$(MP_LINKER_FILE_OPTION),--stack=16,--check-sections,--data-init,--pack-data,--handles,--isr,--no-gc-sections,--fill-upper=0,--stackguard=16,--no-force-link,--smart-io,-Map="${DISTDIR}/${PROJECTNAME}.${IMAGE_TYPE}.map",--report-mem,--memorysummary,${DISTDIR}/memoryfile.xml$(MP_EXTRA_LD_POST)  -mdfp="${DFP_DIR}/xc16" 
-	${MP_CC_DIR}\\xc16-bin2hex ${DISTDIR}/WZYX_UART_V1.1250726.X.${IMAGE_TYPE}.${DEBUGGABLE_SUFFIX} -a  -omf=elf   -mdfp="${DFP_DIR}/xc16" 
-	
-endif
-
-
-# Subprojects
-.build-subprojects:
-
-
-# Subprojects
-.clean-subprojects:
-
-# Clean Targets
-.clean-conf: ${CLEAN_SUBPROJECTS}
-	${RM} -r ${OBJECTDIR}
-	${RM} -r ${DISTDIR}
-
-# Enable dependency checking
-.dep.inc: .depcheck-impl
-
-DEPFILES=$(wildcard ${POSSIBLE_DEPFILES})
-ifneq (${DEPFILES},)
-include ${DEPFILES}
-endif

WZYX_UART_V1.1250726.X/WZYX_UART_V1.1250726.X/nbproject/Makefile-genesis.properties

@@ -1,13 +0,0 @@
-#
-#Tue Aug 05 18:50:47 CST 2025
-default.languagetoolchain.version=2.10
-default.Pack.dfplocation=C\:\\Program Files\\Microchip\\MPLABX\\v6.15\\packs\\Microchip\\PIC24F-GL-GU_DFP\\1.5.121
-conf.ids=default
-default.languagetoolchain.dir=C\:\\Program Files\\Microchip\\xc16\\v2.10\\bin
-host.id=1lj1-c7wd-qs
-configurations-xml=1f28628db205b0a44b9f93256c4983ee
-default.com-microchip-mplab-mdbcore-PICKit3Tool-PICkit3DbgToolManager.md5=50072f33d27b72924000ca2dca4b7622
-com-microchip-mplab-nbide-embedded-makeproject-MakeProject.md5=e62346c0c0ecee2637e613b49cb7b7fa
-proj.dir=F\:\\library\\source\\WZYX_UART_V1.1250726.X\\WZYX_UART_V1.1250726.X
-host.platform=windows
-default.com-microchip-mplab-nbide-toolchain-xc16-XC16LanguageToolchain.md5=07f7da95e66d00aa4668de5175f752c5

WZYX_UART_V1.1250726.X/WZYX_UART_V1.1250726.X/nbproject/Makefile-impl.mk

@@ -1,69 +0,0 @@
-#
-# Generated Makefile - do not edit!
-#
-# Edit the Makefile in the project folder instead (../Makefile). Each target
-# has a pre- and a post- target defined where you can add customization code.
-#
-# This makefile implements macros and targets common to all configurations.
-#
-# NOCDDL
-
-
-# Building and Cleaning subprojects are done by default, but can be controlled with the SUB
-# macro. If SUB=no, subprojects will not be built or cleaned. The following macro
-# statements set BUILD_SUB-CONF and CLEAN_SUB-CONF to .build-reqprojects-conf
-# and .clean-reqprojects-conf unless SUB has the value 'no'
-SUB_no=NO
-SUBPROJECTS=${SUB_${SUB}}
-BUILD_SUBPROJECTS_=.build-subprojects
-BUILD_SUBPROJECTS_NO=
-BUILD_SUBPROJECTS=${BUILD_SUBPROJECTS_${SUBPROJECTS}}
-CLEAN_SUBPROJECTS_=.clean-subprojects
-CLEAN_SUBPROJECTS_NO=
-CLEAN_SUBPROJECTS=${CLEAN_SUBPROJECTS_${SUBPROJECTS}}
-
-
-# Project Name
-PROJECTNAME=WZYX_UART_V1.1250726.X
-
-# Active Configuration
-DEFAULTCONF=default
-CONF=${DEFAULTCONF}
-
-# All Configurations
-ALLCONFS=default 
-
-
-# build
-.build-impl: .build-pre
-	${MAKE} -f nbproject/Makefile-${CONF}.mk SUBPROJECTS=${SUBPROJECTS} .build-conf
-
-
-# clean
-.clean-impl: .clean-pre
-	${MAKE} -f nbproject/Makefile-${CONF}.mk SUBPROJECTS=${SUBPROJECTS} .clean-conf
-
-# clobber
-.clobber-impl: .clobber-pre .depcheck-impl
-	    ${MAKE} SUBPROJECTS=${SUBPROJECTS} CONF=default clean
-
-
-
-# all
-.all-impl: .all-pre .depcheck-impl
-	    ${MAKE} SUBPROJECTS=${SUBPROJECTS} CONF=default build
-
-
-
-# dependency checking support
-.depcheck-impl:
-#	@echo "# This code depends on make tool being used" >.dep.inc
-#	@if [ -n "${MAKE_VERSION}" ]; then \
-#	    echo "DEPFILES=\$$(wildcard \$$(addsuffix .d, \$${OBJECTFILES}))" >>.dep.inc; \
-#	    echo "ifneq (\$${DEPFILES},)" >>.dep.inc; \
-#	    echo "include \$${DEPFILES}" >>.dep.inc; \
-#	    echo "endif" >>.dep.inc; \
-#	else \
-#	    echo ".KEEP_STATE:" >>.dep.inc; \
-#	    echo ".KEEP_STATE_FILE:.make.state.\$${CONF}" >>.dep.inc; \
-#	fi

WZYX_UART_V1.1250726.X/WZYX_UART_V1.1250726.X/nbproject/Makefile-local-default.mk

@@ -1,37 +0,0 @@
-#
-# Generated Makefile - do not edit!
-#
-#
-# This file contains information about the location of compilers and other tools.
-# If you commmit this file into your revision control server, you will be able to 
-# to checkout the project and build it from the command line with make. However,
-# if more than one person works on the same project, then this file might show
-# conflicts since different users are bound to have compilers in different places.
-# In that case you might choose to not commit this file and let MPLAB X recreate this file
-# for each user. The disadvantage of not commiting this file is that you must run MPLAB X at
-# least once so the file gets created and the project can be built. Finally, you can also
-# avoid using this file at all if you are only building from the command line with make.
-# You can invoke make with the values of the macros:
-# $ makeMP_CC="/opt/microchip/mplabc30/v3.30c/bin/pic30-gcc" ...  
-#
-SHELL=cmd.exe
-PATH_TO_IDE_BIN=C:/Program Files/Microchip/MPLABX/v6.15/mplab_platform/platform/../mplab_ide/modules/../../bin/
-# Adding MPLAB X bin directory to path.
-PATH:=C:/Program Files/Microchip/MPLABX/v6.15/mplab_platform/platform/../mplab_ide/modules/../../bin/:$(PATH)
-# Path to java used to run MPLAB X when this makefile was created
-MP_JAVA_PATH="C:\Program Files\Microchip\MPLABX\v6.15\sys\java\zulu8.64.0.19-ca-fx-jre8.0.345-win_x64/bin/"
-OS_CURRENT="$(shell uname -s)"
-MP_CC="C:\Program Files\Microchip\xc16\v2.10\bin\xc16-gcc.exe"
-# MP_CPPC is not defined
-# MP_BC is not defined
-MP_AS="C:\Program Files\Microchip\xc16\v2.10\bin\xc16-as.exe"
-MP_LD="C:\Program Files\Microchip\xc16\v2.10\bin\xc16-ld.exe"
-MP_AR="C:\Program Files\Microchip\xc16\v2.10\bin\xc16-ar.exe"
-DEP_GEN=${MP_JAVA_PATH}java -jar "C:/Program Files/Microchip/MPLABX/v6.15/mplab_platform/platform/../mplab_ide/modules/../../bin/extractobjectdependencies.jar"
-MP_CC_DIR="C:\Program Files\Microchip\xc16\v2.10\bin"
-# MP_CPPC_DIR is not defined
-# MP_BC_DIR is not defined
-MP_AS_DIR="C:\Program Files\Microchip\xc16\v2.10\bin"
-MP_LD_DIR="C:\Program Files\Microchip\xc16\v2.10\bin"
-MP_AR_DIR="C:\Program Files\Microchip\xc16\v2.10\bin"
-DFP_DIR=C:/Program Files/Microchip/MPLABX/v6.15/packs/Microchip/PIC24F-GL-GU_DFP/1.5.121

WZYX_UART_V1.1250726.X/WZYX_UART_V1.1250726.X/nbproject/Makefile-variables.mk

@@ -1,10 +0,0 @@
-#
-# Generated - do not edit!
-#
-# NOCDDL
-#
-CND_BASEDIR=`pwd`
-# default configuration
-CND_ARTIFACT_DIR_default=dist/default/production
-CND_ARTIFACT_NAME_default=WZYX_UART_V1.1250726.X.production.hex
-CND_ARTIFACT_PATH_default=dist/default/production/WZYX_UART_V1.1250726.X.production.hex

WZYX_UART_V1.1250726.X/WZYX_UART_V1.1250726.X/nbproject/configurations.xml

@@ -1,1319 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<configurationDescriptor version="65">
-  <logicalFolder name="root" displayName="root" projectFiles="true">
-    <logicalFolder name="HeaderFiles" displayName="头文件" projectFiles="true">
-      <itemPath>Uart.h</itemPath>
-      <itemPath>Pin.h</itemPath>
-      <itemPath>Delay.h</itemPath>
-      <itemPath>User.h</itemPath>
-    </logicalFolder>
-    <logicalFolder name="SourceFiles" displayName="源文件" projectFiles="true">
-      <itemPath>main.c</itemPath>
-      <itemPath>Delay.c</itemPath>
-      <itemPath>Pin.c</itemPath>
-      <itemPath>Uart.c</itemPath>
-    </logicalFolder>
-    <logicalFolder name="LinkerScript" displayName="链接器文件" projectFiles="true">
-    </logicalFolder>
-    <logicalFolder name="ExternalFiles" displayName="重要文件" projectFiles="false">
-      <itemPath>Makefile</itemPath>
-    </logicalFolder>
-  </logicalFolder>
-  <sourceRootList>
-    <Elem>.</Elem>
-    <Elem>../../../../../11. N8/01.Code/current/N8_PCR_N1.20230213/NQ8QPCR_NO2.20230823.X/file</Elem>
-  </sourceRootList>
-  <projectmakefile>Makefile</projectmakefile>
-  <confs>
-    <conf name="default" type="2">
-      <toolsSet>
-        <developmentServer>localhost</developmentServer>
-        <targetDevice>PIC24FJ512GU410</targetDevice>
-        <targetHeader></targetHeader>
-        <targetPluginBoard></targetPluginBoard>
-        <platformTool>PICkit3PlatformTool</platformTool>
-        <languageToolchain>XC16</languageToolchain>
-        <languageToolchainVersion>2.10</languageToolchainVersion>
-        <platform>3</platform>
-      </toolsSet>
-      <packs>
-        <pack name="PIC24F-GL-GU_DFP" vendor="Microchip" version="1.5.121"/>
-      </packs>
-      <ScriptingSettings>
-      </ScriptingSettings>
-      <compileType>
-        <linkerTool>
-          <linkerLibItems>
-          </linkerLibItems>
-        </linkerTool>
-        <archiverTool>
-        </archiverTool>
-        <loading>
-          <useAlternateLoadableFile>false</useAlternateLoadableFile>
-          <parseOnProdLoad>false</parseOnProdLoad>
-          <alternateLoadableFile></alternateLoadableFile>
-        </loading>
-        <subordinates>
-        </subordinates>
-      </compileType>
-      <makeCustomizationType>
-        <makeCustomizationPreStepEnabled>false</makeCustomizationPreStepEnabled>
-        <makeUseCleanTarget>false</makeUseCleanTarget>
-        <makeCustomizationPreStep></makeCustomizationPreStep>
-        <makeCustomizationPostStepEnabled>false</makeCustomizationPostStepEnabled>
-        <makeCustomizationPostStep></makeCustomizationPostStep>
-        <makeCustomizationPutChecksumInUserID>false</makeCustomizationPutChecksumInUserID>
-        <makeCustomizationEnableLongLines>false</makeCustomizationEnableLongLines>
-        <makeCustomizationNormalizeHexFile>false</makeCustomizationNormalizeHexFile>
-      </makeCustomizationType>
-      <C30>
-        <property key="cast-align" value="false"/>
-        <property key="code-model" value="default"/>
-        <property key="const-model" value="default"/>
-        <property key="data-model" value="default"/>
-        <property key="disable-instruction-scheduling" value="false"/>
-        <property key="enable-all-warnings" value="true"/>
-        <property key="enable-ansi-std" value="false"/>
-        <property key="enable-ansi-warnings" value="false"/>
-        <property key="enable-fatal-warnings" value="false"/>
-        <property key="enable-large-arrays" value="false"/>
-        <property key="enable-omit-frame-pointer" value="false"/>
-        <property key="enable-procedural-abstraction" value="false"/>
-        <property key="enable-short-double" value="false"/>
-        <property key="enable-symbols" value="true"/>
-        <property key="enable-unroll-loops" value="false"/>
-        <property key="expand-pragma-config" value="false"/>
-        <property key="extra-include-directories" value=""/>
-        <property key="isolate-each-function" value="false"/>
-        <property key="keep-inline" value="false"/>
-        <property key="oXC16gcc-align-arr" value="false"/>
-        <property key="oXC16gcc-cnsts-mauxflash" value="false"/>
-        <property key="oXC16gcc-data-sects" value="false"/>
-        <property key="oXC16gcc-errata" value=""/>
-        <property key="oXC16gcc-fillupper" value=""/>
-        <property key="oXC16gcc-large-aggregate" value="false"/>
-        <property key="oXC16gcc-mauxflash" value="false"/>
-        <property key="oXC16gcc-mpa-lvl" value=""/>
-        <property key="oXC16gcc-name-text-sec" value=""/>
-        <property key="oXC16gcc-near-chars" value="false"/>
-        <property key="oXC16gcc-no-isr-warn" value="false"/>
-        <property key="oXC16gcc-sfr-warn" value="false"/>
-        <property key="oXC16gcc-smar-io-lvl" value="1"/>
-        <property key="oXC16gcc-smart-io-fmt" value=""/>
-        <property key="optimization-level" value="0"/>
-        <property key="post-instruction-scheduling" value="default"/>
-        <property key="pre-instruction-scheduling" value="default"/>
-        <property key="preprocessor-macros" value=""/>
-        <property key="scalar-model" value="default"/>
-        <property key="use-cci" value="false"/>
-        <property key="use-iar" value="false"/>
-      </C30>
-      <C30-AR>
-        <property key="additional-options-chop-files" value="false"/>
-      </C30-AR>
-      <C30-AS>
-        <property key="assembler-symbols" value=""/>
-        <property key="expand-macros" value="false"/>
-        <property key="extra-include-directories-for-assembler" value=""/>
-        <property key="extra-include-directories-for-preprocessor" value=""/>
-        <property key="false-conditionals" value="false"/>
-        <property key="keep-locals" value="false"/>
-        <property key="list-assembly" value="false"/>
-        <property key="list-section-info" value="false"/>
-        <property key="list-source" value="false"/>
-        <property key="list-symbols" value="false"/>
-        <property key="oXC16asm-extra-opts" value=""/>
-        <property key="oXC16asm-list-to-file" value="false"/>
-        <property key="omit-debug-dirs" value="false"/>
-        <property key="omit-forms" value="false"/>
-        <property key="preprocessor-macros" value=""/>
-        <property key="relax" value="false"/>
-        <property key="warning-level" value="emit-warnings"/>
-      </C30-AS>
-      <C30-CO>
-        <property key="coverage-enable" value=""/>
-        <property key="stack-guidance" value="false"/>
-      </C30-CO>
-      <C30-LD>
-        <property key="additional-options-use-response-files" value="false"/>
-        <property key="boot-eeprom" value="no_eeprom"/>
-        <property key="boot-flash" value="no_flash"/>
-        <property key="boot-ram" value="no_ram"/>
-        <property key="boot-write-protect" value="no_write_protect"/>
-        <property key="enable-check-sections" value="false"/>
-        <property key="enable-data-init" value="true"/>
-        <property key="enable-default-isr" value="true"/>
-        <property key="enable-handles" value="true"/>
-        <property key="enable-pack-data" value="true"/>
-        <property key="extra-lib-directories" value=""/>
-        <property key="fill-flash-options-addr" value=""/>
-        <property key="fill-flash-options-const" value=""/>
-        <property key="fill-flash-options-how" value="0"/>
-        <property key="fill-flash-options-inc-const" value="1"/>
-        <property key="fill-flash-options-increment" value=""/>
-        <property key="fill-flash-options-seq" value=""/>
-        <property key="fill-flash-options-what" value="0"/>
-        <property key="general-code-protect" value="no_code_protect"/>
-        <property key="general-write-protect" value="no_write_protect"/>
-        <property key="generate-cross-reference-file" value="false"/>
-        <property key="heap-size" value=""/>
-        <property key="input-libraries" value=""/>
-        <property key="linker-stack" value="true"/>
-        <property key="linker-symbols" value=""/>
-        <property key="map-file" value="${DISTDIR}/${PROJECTNAME}.${IMAGE_TYPE}.map"/>
-        <property key="no-ivt" value="false"/>
-        <property key="oXC16ld-extra-opts" value=""/>
-        <property key="oXC16ld-fill-upper" value="0"/>
-        <property key="oXC16ld-force-link" value="false"/>
-        <property key="oXC16ld-no-smart-io" value="false"/>
-        <property key="oXC16ld-nostdlib" value="false"/>
-        <property key="oXC16ld-stackguard" value="16"/>
-        <property key="preprocessor-macros" value=""/>
-        <property key="remove-unused-sections" value="false"/>
-        <property key="report-memory-usage" value="true"/>
-        <property key="secure-eeprom" value="no_eeprom"/>
-        <property key="secure-flash" value="no_flash"/>
-        <property key="secure-ram" value="no_ram"/>
-        <property key="secure-write-protect" value="no_write_protect"/>
-        <property key="stack-size" value="16"/>
-        <property key="symbol-stripping" value=""/>
-        <property key="trace-symbols" value=""/>
-        <property key="warn-section-align" value="false"/>
-      </C30-LD>
-      <C30Global>
-        <property key="combine-sourcefiles" value="false"/>
-        <property key="common-include-directories" value=""/>
-        <property key="dual-boot-partition" value="0"/>
-        <property key="fast-math" value="false"/>
-        <property key="generic-16-bit" value="false"/>
-        <property key="legacy-libc" value="true"/>
-        <property key="mpreserve-all" value="false"/>
-        <property key="oXC16glb-macros" value=""/>
-        <property key="omit-pack-options" value="1"/>
-        <property key="output-file-format" value="elf"/>
-        <property key="preserve-all" value="false"/>
-        <property key="preserve-file" value=""/>
-        <property key="relaxed-math" value="false"/>
-        <property key="save-temps" value="false"/>
-      </C30Global>
-      <PICkit3PlatformTool>
-        <property key="ADC 1" value="true"/>
-        <property key="AutoSelectMemRanges" value="auto"/>
-        <property key="CLC 1" value="true"/>
-        <property key="CLC 2" value="true"/>
-        <property key="CLC 3" value="true"/>
-        <property key="CLC 4" value="true"/>
-        <property key="COMPARATOR" value="true"/>
-        <property key="CRC" value="true"/>
-        <property key="DMA" value="true"/>
-        <property key="I2C 1" value="true"/>
-        <property key="I2C 2" value="true"/>
-        <property key="I2C 3" value="true"/>
-        <property key="IOC" value="true"/>
-        <property key="LCD" value="true"/>
-        <property key="LVD" value="true"/>
-        <property key="MCCP/SCCP 1" value="true"/>
-        <property key="MCCP/SCCP 2" value="true"/>
-        <property key="MCCP/SCCP 3" value="true"/>
-        <property key="MCCP/SCCP 4" value="true"/>
-        <property key="MCCP/SCCP 5" value="true"/>
-        <property key="MCCP/SCCP 6" value="true"/>
-        <property key="MCCP/SCCP 7" value="true"/>
-        <property key="MCCP/SCCP 8" value="true"/>
-        <property key="OSC" value="true"/>
-        <property key="REFO" value="true"/>
-        <property key="RTCC" value="true"/>
-        <property key="SPI 1" value="true"/>
-        <property key="SPI 2" value="true"/>
-        <property key="SPI 3" value="true"/>
-        <property key="SPI 4" value="true"/>
-        <property key="TIMER 1" value="true"/>
-        <property key="TIMER 2" value="true"/>
-        <property key="TIMER 3" value="true"/>
-        <property key="TIMER 4" value="true"/>
-        <property key="TIMER 5" value="true"/>
-        <property key="ToolFirmwareFilePath"
-                  value="Press to browse for a specific firmware version"/>
-        <property key="ToolFirmwareOption.UseLatestFirmware" value="true"/>
-        <property key="UART 1" value="true"/>
-        <property key="UART 2" value="true"/>
-        <property key="UART 3" value="true"/>
-        <property key="UART 4" value="true"/>
-        <property key="UART 5" value="true"/>
-        <property key="UART 6" value="true"/>
-        <property key="USB" value="true"/>
-        <property key="debugoptions.debug-startup" value="Use system settings"/>
-        <property key="debugoptions.reset-behaviour" value="Use system settings"/>
-        <property key="debugoptions.useswbreakpoints" value="false"/>
-        <property key="event.recorder.enabled" value="false"/>
-        <property key="event.recorder.scvd.files" value=""/>
-        <property key="hwtoolclock.frcindebug" value="false"/>
-        <property key="lastid" value=""/>
-        <property key="memories.aux" value="false"/>
-        <property key="memories.bootflash" value="true"/>
-        <property key="memories.configurationmemory" value="true"/>
-        <property key="memories.configurationmemory2" value="true"/>
-        <property key="memories.dataflash" value="true"/>
-        <property key="memories.eeprom" value="true"/>
-        <property key="memories.flashdata" value="true"/>
-        <property key="memories.id" value="true"/>
-        <property key="memories.instruction.ram" value="true"/>
-        <property key="memories.instruction.ram.ranges"
-                  value="${memories.instruction.ram.ranges}"/>
-        <property key="memories.programmemory" value="true"/>
-        <property key="memories.programmemory.ranges" value="0-55eff"/>
-        <property key="poweroptions.powerenable" value="false"/>
-        <property key="programmertogo.imagename" value=""/>
-        <property key="programoptions.donoteraseauxmem" value="false"/>
-        <property key="programoptions.eraseb4program" value="true"/>
-        <property key="programoptions.pgmspeed" value="2"/>
-        <property key="programoptions.preservedataflash" value="false"/>
-        <property key="programoptions.preservedataflash.ranges"
-                  value="${programoptions.preservedataflash.ranges}"/>
-        <property key="programoptions.preserveeeprom" value="false"/>
-        <property key="programoptions.preserveeeprom.ranges" value=""/>
-        <property key="programoptions.preserveprogram.ranges" value=""/>
-        <property key="programoptions.preserveprogramrange" value="false"/>
-        <property key="programoptions.preserveuserid" value="false"/>
-        <property key="programoptions.programcalmem" value="false"/>
-        <property key="programoptions.programuserotp" value="false"/>
-        <property key="programoptions.testmodeentrymethod" value="VDDFirst"/>
-        <property key="programoptions.usehighvoltageonmclr" value="false"/>
-        <property key="programoptions.uselvpprogramming" value="false"/>
-        <property key="voltagevalue" value="3.25"/>
-        <property key="冻结所有其他外设" value="true"/>
-        <property key="安全段。分部编程" value="FullChipProgramming"/>
-      </PICkit3PlatformTool>
-      <Simulator>
-        <property key="codecoverage.enabled" value="Disable"/>
-        <property key="codecoverage.enableoutputtofile" value="false"/>
-        <property key="codecoverage.outputfile" value=""/>
-        <property key="debugoptions.debug-startup" value="Use system settings"/>
-        <property key="debugoptions.reset-behaviour" value="Use system settings"/>
-        <property key="event.recorder.enabled" value="false"/>
-        <property key="event.recorder.scvd.files" value=""/>
-        <property key="lastid" value=""/>
-        <property key="oscillator.auxfrequency" value="120"/>
-        <property key="oscillator.auxfrequencyunit" value="Mega"/>
-        <property key="oscillator.frequency" value="1"/>
-        <property key="oscillator.frequencyunit" value="Mega"/>
-        <property key="oscillator.rcfrequency" value="250"/>
-        <property key="oscillator.rcfrequencyunit" value="Kilo"/>
-        <property key="periphADC1.altscl" value="false"/>
-        <property key="periphADC1.minTacq" value=""/>
-        <property key="periphADC1.tacqunits" value="microseconds"/>
-        <property key="periphADC2.altscl" value="false"/>
-        <property key="periphADC2.minTacq" value=""/>
-        <property key="periphADC2.tacqunits" value="microseconds"/>
-        <property key="periphComp1.gte" value="gt"/>
-        <property key="periphComp2.gte" value="gt"/>
-        <property key="periphComp3.gte" value="gt"/>
-        <property key="periphComp4.gte" value="gt"/>
-        <property key="periphComp5.gte" value="gt"/>
-        <property key="periphComp6.gte" value="gt"/>
-        <property key="reset.scl" value="false"/>
-        <property key="reset.type" value="MCLR"/>
-        <property key="toolpack.updateoptions"
-                  value="toolpack.updateoptions.uselatestoolpack"/>
-        <property key="toolpack.updateoptions.packversion"
-                  value="Press to select which tool pack to use"/>
-        <property key="tracecontrol.include.timestamp" value="summarydataenabled"/>
-        <property key="tracecontrol.select" value="0"/>
-        <property key="tracecontrol.stallontracebufferfull" value="false"/>
-        <property key="tracecontrol.timestamp" value="0"/>
-        <property key="tracecontrol.tracebufmax" value="546000"/>
-        <property key="tracecontrol.tracefile" value="defmplabxtrace.log"/>
-        <property key="tracecontrol.traceresetonrun" value="false"/>
-        <property key="uart0io.output" value="window"/>
-        <property key="uart0io.outputfile" value=""/>
-        <property key="uart0io.uartioenabled" value="false"/>
-        <property key="uart1io.output" value="window"/>
-        <property key="uart1io.outputfile" value=""/>
-        <property key="uart1io.uartioenabled" value="false"/>
-        <property key="uart2io.output" value="window"/>
-        <property key="uart2io.outputfile" value=""/>
-        <property key="uart2io.uartioenabled" value="false"/>
-        <property key="uart3io.output" value="window"/>
-        <property key="uart3io.outputfile" value=""/>
-        <property key="uart3io.uartioenabled" value="false"/>
-        <property key="uart4io.output" value="window"/>
-        <property key="uart4io.outputfile" value=""/>
-        <property key="uart4io.uartioenabled" value="false"/>
-        <property key="uart5io.output" value="window"/>
-        <property key="uart5io.outputfile" value=""/>
-        <property key="uart5io.uartioenabled" value="false"/>
-        <property key="uart6io.output" value="window"/>
-        <property key="uart6io.outputfile" value=""/>
-        <property key="uart6io.uartioenabled" value="false"/>
-        <property key="usart0io.output" value="window"/>
-        <property key="usart0io.outputfile" value=""/>
-        <property key="usart0io.uartioenabled" value="false"/>
-        <property key="usart1io.output" value="window"/>
-        <property key="usart1io.outputfile" value=""/>
-        <property key="usart1io.uartioenabled" value="false"/>
-        <property key="usart2io.output" value="window"/>
-        <property key="usart2io.outputfile" value=""/>
-        <property key="usart2io.uartioenabled" value="false"/>
-        <property key="usart3io.output" value="window"/>
-        <property key="usart3io.outputfile" value=""/>
-        <property key="usart3io.uartioenabled" value="false"/>
-        <property key="usart4io.output" value="window"/>
-        <property key="usart4io.outputfile" value=""/>
-        <property key="usart4io.uartioenabled" value="false"/>
-        <property key="usartc0io.output" value="window"/>
-        <property key="usartc0io.outputfile" value=""/>
-        <property key="usartc0io.uartioenabled" value="false"/>
-        <property key="usartc1io.output" value="window"/>
-        <property key="usartc1io.outputfile" value=""/>
-        <property key="usartc1io.uartioenabled" value="false"/>
-        <property key="usartd0io.output" value="window"/>
-        <property key="usartd0io.outputfile" value=""/>
-        <property key="usartd0io.uartioenabled" value="false"/>
-        <property key="usartd1io.output" value="window"/>
-        <property key="usartd1io.outputfile" value=""/>
-        <property key="usartd1io.uartioenabled" value="false"/>
-        <property key="usarte0io.output" value="window"/>
-        <property key="usarte0io.outputfile" value=""/>
-        <property key="usarte0io.uartioenabled" value="false"/>
-        <property key="usarte1io.output" value="window"/>
-        <property key="usarte1io.outputfile" value=""/>
-        <property key="usarte1io.uartioenabled" value="false"/>
-        <property key="usarte2io.output" value="window"/>
-        <property key="usarte2io.outputfile" value=""/>
-        <property key="usarte2io.uartioenabled" value="false"/>
-        <property key="usartf0io.output" value="window"/>
-        <property key="usartf0io.outputfile" value=""/>
-        <property key="usartf0io.uartioenabled" value="false"/>
-        <property key="usartf1io.output" value="window"/>
-        <property key="usartf1io.outputfile" value=""/>
-        <property key="usartf1io.uartioenabled" value="false"/>
-        <property key="warningmessagebreakoptions.W0001_CORE_BITREV_MODULO_EN"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0002_CORE_SECURE_MEMORYACCESS"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0003_CORE_SW_RESET" value="report"/>
-        <property key="warningmessagebreakoptions.W0004_CORE_WDT_RESET" value="report"/>
-        <property key="warningmessagebreakoptions.W0005_CORE_IOPUW_RESET"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0006_CORE_CODE_GUARD_PFC_RESET"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0007_CORE_DO_LOOP_STACK_UNDERFLOW"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0008_CORE_DO_LOOP_STACK_OVERFLOW"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0009_CORE_NESTED_DO_LOOP_RANGE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0010_CORE_SIM32_ODD_WORDACCESS"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0011_CORE_SIM32_UNIMPLEMENTED_RAMACCESS"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0012_CORE_STACK_OVERFLOW_RESET"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0013_CORE_STACK_UNDERFLOW_RESET"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0014_CORE_INVALID_OPCODE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0015_CORE_INVALID_ALT_WREG_SET"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0016_CORE_STACK_ERROR"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0017_CORE_ODD_RAMWORDACCESS"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0018_CORE_UNIMPLEMENTED_RAMACCESS"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0019_CORE_UNIMPLEMENTED_PROMACCESS"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0020_CORE_ACCESS_NOTIN_X_SPACE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0021_CORE_ACCESS_NOTIN_Y_SPACE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0022_CORE_XMODEND_LESS_XMODSRT"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0023_CORE_YMODEND_LESS_YMODSRT"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0024_CORE_BITREV_MOD_IS_ZERO"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0025_CORE_HARD_TRAP" value="report"/>
-        <property key="warningmessagebreakoptions.W0026_CORE_UNIMPLEMENTED_MEMORYACCESS"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0027_CORE_UNIMPLEMENTED_EDSACCESS"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0028_TBLRD_WORM_CONFIG_MEMORY"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0029_TBLRD_DEVICE_ID" value="report"/>
-        <property key="warningmessagebreakoptions.W0030_CORE_UNIMPLEMENTED_MEMORY_ACCESS"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0031_BSLIM_INSUFFICIENT_BOOT_SEGMENT"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0032_BSLIM_LIMITS_EXCEEDS_PROG_MEMORY"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0033_CORE_UNPREDICTABLE_OPCODE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0034_CORE_UNALIGNED_MEMORY_ACCESS"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0035_CORE_UNIMPLEMENTED_RAMACCESS_NOTRAP"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0036_UNIMPLEMENTED_INSTRUCTION"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0040_FPU_DIFF_CP10_CP11"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0041_FPU_ACCESS_DENIED"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0042_FPU_PRIVILEGED_ACCESS_ONLY"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0043_FPU_CP_RESERVED_VALUE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0044_FPU_OUT_OF_RANGE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0051_INSTRUCTION_DIV_NOT_ENOUGH_REPEAT"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0052_INSTRUCTION_DIV_TOO_MANY_REPEAT"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0053_INVALID_INTCON_VS_FIELD_VALUE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0101_SIM_UPDATE_FAILED"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0102_SIM_PERIPH_MISSING"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0103_SIM_PERIPH_FAILED"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0104_SIM_FAILED_TO_INIT_TOOL"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0105_SIM_INVALID_FIELD"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0106_SIM_PERIPH_PARTIAL_SUPPORT"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0107_SIM_NOT_SUPPORTED"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0108_SIM_RESERVED_SETTING"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0109_SIM_PERIPHERAL_IN_DEVELOPMENT"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0110_SIM_UNEXPECTED_EVENT"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0111_SIM_UNSUPPORTED_SELECTION"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0112_SIM_INVALID_OPERATION"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0113_SIM_WRITE_TO_PROTECTED_SFR"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0114_SIM_INVALID_KEY" value="report"/>
-        <property key="warningmessagebreakoptions.W0115_SIM_FAILED_TO_PARSE_DEVICE_FILE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0116_SIM_STACK_OVERFLOW"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0117_SIM_STACK_UNDERFLOW"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0118_SIM_INVALID_FIELD_VALUE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0119_SIM_SAMPLING_RATE_VIOLATION"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0201_ADC_NO_STIMULUS_FILE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0202_ADC_GO_DONE_BIT" value="report"/>
-        <property key="warningmessagebreakoptions.W0203_ADC_MINIMUM_2_TAD"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0204_ADC_TAD_TOO_SMALL"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0205_ADC_UNEXPECTED_TRANSITION"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0206_ADC_SAMP_TIME_TOO_SHORT"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0207_ADC_NO_PINS_SCANNED"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0208_ADC_UNSUPPORTED_CLOCK_SOURCE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0209_ADC_ANALOG_CHANNEL_DIGITAL"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0210_ADC_ANALOG_CHANNEL_OUTPUT"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0211_ADC_PIN_INVALID_CHANNEL"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0212_ADC_BAND_GAP_NOT_SUPPORTED"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0213_ADC_RESERVED_SSRC"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0214_ADC_POSITIVE_INPUT_DIGITAL"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0215_ADC_POSITIVE_INPUT_OUTPUT"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0216_ADC_NEGATIVE_INPUT_DIGITAL"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0217_ADC_NEGATIVE_INPUT_OUTPUT"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0218_ADC_REFERENCE_HIGH_DIGITAL"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0219_ADC_REFERENCE_HIGH_OUTPUT"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0220_ADC_REFERENCE_LOW_DIGITAL"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0221_ADC_REFERENCE_LOW_OUTPUT"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0222_ADC_OVERFLOW" value="report"/>
-        <property key="warningmessagebreakoptions.W0223_ADC_UNDERFLOW" value="report"/>
-        <property key="warningmessagebreakoptions.W0224_ADC_CTMU_NOT_SUPPORTED"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0225_ADC_INVALID_CH0S"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0226_ADC_VBAT_NOT_SUPPORTED"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0227_ADC_INVALID_ADCS"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0228_ADC_INVALID_ADCS"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0229_ADC_INVALID_ADCS"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0230_ADC_TRIGSEL_NOT_SUPPORTED"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0231_ADC_NOT_WARMED" value="report"/>
-        <property key="warningmessagebreakoptions.W0232_ADC_CALIBRATION_ABORTED"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0233_ADC_CORE_POWERED_EARLY"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0234_ADC_ALREADY_CALIBRATING"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0235_ADC_CAL_TYPE_CHANGED"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0236_ADC_CAL_INVALIDATED"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0237_ADC_UNKNOWN_DATASHEET"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0238_ADC_INVALID_SFR_FIELD_VALUE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0239_ADC_UNSUPPORTED_INPUT"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0240_ADC_NOT_CALIBRATED"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0241_ADC_FRACTIONAL_NOT_ALLOWED"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0242_ADC_BG_INT_BEFORE_PWR"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0243_ADC_INVALID_TAD" value="report"/>
-        <property key="warningmessagebreakoptions.W0244_ADC_CONVERSION_ABORTED"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0245_ADC_BUFREGEN_NOT_ALLOWED"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0246_ADC_ACCUMULATION_BAD_RESSEL"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0247_ADC_CONVERSION_BAD_RESSEL"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0300_NVM_WR_BEFORE_KEY_SEQ"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0400_PWM_PWM_FASTER_THAN_FOSC"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0600_WDT_2ND_WDT_MR_WRITE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0601_WDT_EXPIRED" value="report"/>
-        <property key="warningmessagebreakoptions.W0601_WDT_RESET_OUTSIDE_WINDOW"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0700_CLC_GENERAL_WARNING"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0701_CLC_CLCOUT_AS_INPUT"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0702_CLC_CIRCULAR_LOOP"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0800_ACC_INPUT_INVALID_CONFIG"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0801_ACC_INPUT_NOT_SUPPORTED"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0802_ACC_INVERTED_WINDOW_LIMITS"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0803_ACC_MISMATCHED_POS_INPUTS"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0804_ACC_WINDOW_COMP_DISABLED"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0805_ACC_WINDOW_COMPS_MODES"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0806_ACC_FEATURE_NOT_SUPPORTED"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W10001_RESERVED_IRQ_HANDLER_INVOKED"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W10002_UNSUPPORTED_CLK_SOURCE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W10101_UNSUPPORTED_CHANNEL_MODE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W10102_UNSUPPORTED_CLK_SOURCE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W10103_UNSUPPORTED_RECEIVER_FILTER"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W10301_NO_PORT_PINS_FOUND"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W10500_UNSUPPORTED_SOURCE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W1201_DATAFLASH_MEM_OUTSIDE_RANGE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W1202_DATAFLASH_ERASE_WHILE_LOCKED"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W1203_DATAFLASH_WRITE_WHILE_LOCKED"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W1401_DMA_PERIPH_NOT_AVAIL"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W1402_DMA_INVALID_IRQ" value="report"/>
-        <property key="warningmessagebreakoptions.W1403_DMA_INVALID_SFR" value="report"/>
-        <property key="warningmessagebreakoptions.W1404_DMA_INVALID_DMA_ADDR"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W1405_DMA_IRQ_DIR_MISMATCH"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W1600_PPS_INVALID_MAP" value="report"/>
-        <property key="warningmessagebreakoptions.W1601_PPS_INVALID_PIN_DESCRIPTION"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W1800_PWM_TIMER_SELECTION_NOT_AVIALABLE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W1801_PWM_TIMER_SELECTION_BAD_CLOCK_INPUT"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W1802_PWM_TIMER_MISSING_PERSCALER_INFO"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W2001_INPUTCAPTURE_TMR3_UNAVAILABLE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W2002_INPUTCAPTURE_CAPTURE_EMPTY"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W2003_INPUTCAPTURE_SYNCSEL_NOT_AVIALABLE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W2004_INPUTCAPTURE_BAD_SYNC_SOURCE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W2501_OUTPUTCOMPARE_SYNCSEL_NOT_AVIALABLE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W2502_OUTPUTCOMPARE_BAD_SYNC_SOURCE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W2503_OUTPUTCOMPARE_BAD_TRIGGER_SOURCE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W2700_MPU_ILLEGAL_DREGION"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W2701_MPU_INVALID_REGION"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W3000_LPM_READ_PROTECTION_SECTION"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W3010_SPM_WRITE_PROTECTION_SECTION"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W6001_RTT_FORBIDDEN_RTPRES"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W6002_RTT_BAD_WRITING_ALMV"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W6003_RTT_BAD_WRITING_RTPRES"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W7001_SMT_CLK_SELECTION_NOT_SUPPORT"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W7002_SMT_SIG_SELECTION_NOT_SUPPORT"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W7003_SMT_WIN_SELECTION_NOT_SUPPORT"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W8001_OSC_INVALID_CLOCK_SOURCE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W8002_OSC_RESERVED_FEXTOSC"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W9001_TMR_GATE_AND_EXTCLOCK_ENABLED"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W9002_TMR_NO_PIN_AVAILABLE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W9003_TMR_INVALID_CLOCK_SOURCE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W9201_UART_TX_OVERFLOW"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W9202_UART_TX_CAPTUREFILE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W9203_UART_TX_INVALIDINTERRUPTMODE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W9204_UART_RX_EMPTY_QUEUE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W9205_UART_TX_BADFILE" value="report"/>
-        <property key="warningmessagebreakoptions.W9206_UART_RESERVED_MODE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W9207_UART_UNABLETOCLOSE_FILE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W9401_CVREF_INVALIDSOURCESELECTION"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W9402_CVREF_INPUT_OUTPUTPINCONFLICT"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W9601_COMP_FVR_SOURCE_UNAVAILABLE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W9602_COMP_DAC_SOURCE_UNAVAILABLE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W9603_COMP_CVREF_SOURCE_UNAVAILABLE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W9604_COMP_SLOPE_SOURCE_UNAVAILABLE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W9605_COMP_PRG_SOURCE_UNAVAILABLE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W9607_COMP_DGTL_FLTR_OPTION_UNAVAILABLE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W9609_COMP_DGTL_FLTR_CLK_UNAVAILABLE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W9801_FVR_INVALID_MODE_SELECTION"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W9801_SCL_BAD_SUBTYPE_INDICATION"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W9802_SCL_FILE_NOT_FOUND"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W9803_SCL_FAILED_TO_READ_FILE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W9804_SCL_UNRECOGNIZED_LABEL"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W9805_SCL_UNRECOGNIZED_VAR"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W9901_RTSP_INVALID_OPERATION_SELECTION"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W9902_RTSP_FLASH_PROGRAM_WRITE_PROTECTED"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.displaywarningmessagesoption"
-                  value=""/>
-        <property key="warningmessagebreakoptions.warningmessages" value="holdstate"/>
-      </Simulator>
-      <Tool>
-        <property key="ADC 1" value="true"/>
-        <property key="AutoSelectMemRanges" value="auto"/>
-        <property key="CLC 1" value="true"/>
-        <property key="CLC 2" value="true"/>
-        <property key="CLC 3" value="true"/>
-        <property key="CLC 4" value="true"/>
-        <property key="COMPARATOR" value="true"/>
-        <property key="CRC" value="true"/>
-        <property key="DMA" value="true"/>
-        <property key="I2C 1" value="true"/>
-        <property key="I2C 2" value="true"/>
-        <property key="I2C 3" value="true"/>
-        <property key="IOC" value="true"/>
-        <property key="LCD" value="true"/>
-        <property key="LVD" value="true"/>
-        <property key="MCCP/SCCP 1" value="true"/>
-        <property key="MCCP/SCCP 2" value="true"/>
-        <property key="MCCP/SCCP 3" value="true"/>
-        <property key="MCCP/SCCP 4" value="true"/>
-        <property key="MCCP/SCCP 5" value="true"/>
-        <property key="MCCP/SCCP 6" value="true"/>
-        <property key="MCCP/SCCP 7" value="true"/>
-        <property key="MCCP/SCCP 8" value="true"/>
-        <property key="OSC" value="true"/>
-        <property key="REFO" value="true"/>
-        <property key="RTCC" value="true"/>
-        <property key="SPI 1" value="true"/>
-        <property key="SPI 2" value="true"/>
-        <property key="SPI 3" value="true"/>
-        <property key="SPI 4" value="true"/>
-        <property key="TIMER 1" value="true"/>
-        <property key="TIMER 2" value="true"/>
-        <property key="TIMER 3" value="true"/>
-        <property key="TIMER 4" value="true"/>
-        <property key="TIMER 5" value="true"/>
-        <property key="ToolFirmwareFilePath"
-                  value="Press to browse for a specific firmware version"/>
-        <property key="ToolFirmwareOption.UseLatestFirmware" value="true"/>
-        <property key="UART 1" value="true"/>
-        <property key="UART 2" value="true"/>
-        <property key="UART 3" value="true"/>
-        <property key="UART 4" value="true"/>
-        <property key="UART 5" value="true"/>
-        <property key="UART 6" value="true"/>
-        <property key="USB" value="true"/>
-        <property key="codecoverage.enabled" value="Disable"/>
-        <property key="codecoverage.enableoutputtofile" value="false"/>
-        <property key="codecoverage.outputfile" value=""/>
-        <property key="debugoptions.debug-startup" value="Use system settings"/>
-        <property key="debugoptions.reset-behaviour" value="Use system settings"/>
-        <property key="debugoptions.useswbreakpoints" value="false"/>
-        <property key="event.recorder.enabled" value="false"/>
-        <property key="event.recorder.scvd.files" value=""/>
-        <property key="firmware.download.all" value="false"/>
-        <property key="hwtoolclock.frcindebug" value="false"/>
-        <property key="lastid" value=""/>
-        <property key="memories.aux" value="false"/>
-        <property key="memories.bootflash" value="true"/>
-        <property key="memories.configurationmemory" value="true"/>
-        <property key="memories.configurationmemory2" value="true"/>
-        <property key="memories.dataflash" value="true"/>
-        <property key="memories.eeprom" value="true"/>
-        <property key="memories.flashdata" value="true"/>
-        <property key="memories.id" value="true"/>
-        <property key="memories.instruction.ram" value="true"/>
-        <property key="memories.instruction.ram.ranges"
-                  value="${memories.instruction.ram.ranges}"/>
-        <property key="memories.programmemory" value="true"/>
-        <property key="memories.programmemory.ranges" value="0-55eff"/>
-        <property key="oscillator.auxfrequency" value="120"/>
-        <property key="oscillator.auxfrequencyunit" value="Mega"/>
-        <property key="oscillator.frequency" value="1"/>
-        <property key="oscillator.frequencyunit" value="Mega"/>
-        <property key="oscillator.rcfrequency" value="250"/>
-        <property key="oscillator.rcfrequencyunit" value="Kilo"/>
-        <property key="periphADC1.altscl" value="false"/>
-        <property key="periphADC1.minTacq" value=""/>
-        <property key="periphADC1.tacqunits" value="microseconds"/>
-        <property key="periphADC2.altscl" value="false"/>
-        <property key="periphADC2.minTacq" value=""/>
-        <property key="periphADC2.tacqunits" value="microseconds"/>
-        <property key="periphComp1.gte" value="gt"/>
-        <property key="periphComp2.gte" value="gt"/>
-        <property key="periphComp3.gte" value="gt"/>
-        <property key="periphComp4.gte" value="gt"/>
-        <property key="periphComp5.gte" value="gt"/>
-        <property key="periphComp6.gte" value="gt"/>
-        <property key="poweroptions.powerenable" value="false"/>
-        <property key="programmertogo.imagename" value=""/>
-        <property key="programoptions.donoteraseauxmem" value="false"/>
-        <property key="programoptions.eraseb4program" value="true"/>
-        <property key="programoptions.pgmspeed" value="2"/>
-        <property key="programoptions.preservedataflash" value="false"/>
-        <property key="programoptions.preservedataflash.ranges"
-                  value="${programoptions.preservedataflash.ranges}"/>
-        <property key="programoptions.preserveeeprom" value="false"/>
-        <property key="programoptions.preserveeeprom.ranges" value=""/>
-        <property key="programoptions.preserveprogram.ranges" value=""/>
-        <property key="programoptions.preserveprogramrange" value="false"/>
-        <property key="programoptions.preserveuserid" value="false"/>
-        <property key="programoptions.programcalmem" value="false"/>
-        <property key="programoptions.programuserotp" value="false"/>
-        <property key="programoptions.testmodeentrymethod" value="VDDFirst"/>
-        <property key="programoptions.usehighvoltageonmclr" value="false"/>
-        <property key="programoptions.uselvpprogramming" value="false"/>
-        <property key="reset.scl" value="false"/>
-        <property key="reset.type" value="MCLR"/>
-        <property key="toolpack.updateoptions"
-                  value="toolpack.updateoptions.uselatestoolpack"/>
-        <property key="toolpack.updateoptions.packversion"
-                  value="Press to select which tool pack to use"/>
-        <property key="tracecontrol.include.timestamp" value="summarydataenabled"/>
-        <property key="tracecontrol.select" value="0"/>
-        <property key="tracecontrol.stallontracebufferfull" value="false"/>
-        <property key="tracecontrol.timestamp" value="0"/>
-        <property key="tracecontrol.tracebufmax" value="546000"/>
-        <property key="tracecontrol.tracefile" value="defmplabxtrace.log"/>
-        <property key="tracecontrol.traceresetonrun" value="false"/>
-        <property key="uart0io.output" value="window"/>
-        <property key="uart0io.outputfile" value=""/>
-        <property key="uart0io.uartioenabled" value="false"/>
-        <property key="uart1io.output" value="window"/>
-        <property key="uart1io.outputfile" value=""/>
-        <property key="uart1io.uartioenabled" value="false"/>
-        <property key="uart2io.output" value="window"/>
-        <property key="uart2io.outputfile" value=""/>
-        <property key="uart2io.uartioenabled" value="false"/>
-        <property key="uart3io.output" value="window"/>
-        <property key="uart3io.outputfile" value=""/>
-        <property key="uart3io.uartioenabled" value="false"/>
-        <property key="uart4io.output" value="window"/>
-        <property key="uart4io.outputfile" value=""/>
-        <property key="uart4io.uartioenabled" value="false"/>
-        <property key="uart5io.output" value="window"/>
-        <property key="uart5io.outputfile" value=""/>
-        <property key="uart5io.uartioenabled" value="false"/>
-        <property key="uart6io.output" value="window"/>
-        <property key="uart6io.outputfile" value=""/>
-        <property key="uart6io.uartioenabled" value="false"/>
-        <property key="usart0io.output" value="window"/>
-        <property key="usart0io.outputfile" value=""/>
-        <property key="usart0io.uartioenabled" value="false"/>
-        <property key="usart1io.output" value="window"/>
-        <property key="usart1io.outputfile" value=""/>
-        <property key="usart1io.uartioenabled" value="false"/>
-        <property key="usart2io.output" value="window"/>
-        <property key="usart2io.outputfile" value=""/>
-        <property key="usart2io.uartioenabled" value="false"/>
-        <property key="usart3io.output" value="window"/>
-        <property key="usart3io.outputfile" value=""/>
-        <property key="usart3io.uartioenabled" value="false"/>
-        <property key="usart4io.output" value="window"/>
-        <property key="usart4io.outputfile" value=""/>
-        <property key="usart4io.uartioenabled" value="false"/>
-        <property key="usartc0io.output" value="window"/>
-        <property key="usartc0io.outputfile" value=""/>
-        <property key="usartc0io.uartioenabled" value="false"/>
-        <property key="usartc1io.output" value="window"/>
-        <property key="usartc1io.outputfile" value=""/>
-        <property key="usartc1io.uartioenabled" value="false"/>
-        <property key="usartd0io.output" value="window"/>
-        <property key="usartd0io.outputfile" value=""/>
-        <property key="usartd0io.uartioenabled" value="false"/>
-        <property key="usartd1io.output" value="window"/>
-        <property key="usartd1io.outputfile" value=""/>
-        <property key="usartd1io.uartioenabled" value="false"/>
-        <property key="usarte0io.output" value="window"/>
-        <property key="usarte0io.outputfile" value=""/>
-        <property key="usarte0io.uartioenabled" value="false"/>
-        <property key="usarte1io.output" value="window"/>
-        <property key="usarte1io.outputfile" value=""/>
-        <property key="usarte1io.uartioenabled" value="false"/>
-        <property key="usarte2io.output" value="window"/>
-        <property key="usarte2io.outputfile" value=""/>
-        <property key="usarte2io.uartioenabled" value="false"/>
-        <property key="usartf0io.output" value="window"/>
-        <property key="usartf0io.outputfile" value=""/>
-        <property key="usartf0io.uartioenabled" value="false"/>
-        <property key="usartf1io.output" value="window"/>
-        <property key="usartf1io.outputfile" value=""/>
-        <property key="usartf1io.uartioenabled" value="false"/>
-        <property key="voltagevalue" value="3.25"/>
-        <property key="warningmessagebreakoptions.W0001_CORE_BITREV_MODULO_EN"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0002_CORE_SECURE_MEMORYACCESS"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0003_CORE_SW_RESET" value="report"/>
-        <property key="warningmessagebreakoptions.W0004_CORE_WDT_RESET" value="report"/>
-        <property key="warningmessagebreakoptions.W0005_CORE_IOPUW_RESET"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0006_CORE_CODE_GUARD_PFC_RESET"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0007_CORE_DO_LOOP_STACK_UNDERFLOW"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0008_CORE_DO_LOOP_STACK_OVERFLOW"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0009_CORE_NESTED_DO_LOOP_RANGE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0010_CORE_SIM32_ODD_WORDACCESS"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0011_CORE_SIM32_UNIMPLEMENTED_RAMACCESS"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0012_CORE_STACK_OVERFLOW_RESET"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0013_CORE_STACK_UNDERFLOW_RESET"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0014_CORE_INVALID_OPCODE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0015_CORE_INVALID_ALT_WREG_SET"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0016_CORE_STACK_ERROR"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0017_CORE_ODD_RAMWORDACCESS"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0018_CORE_UNIMPLEMENTED_RAMACCESS"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0019_CORE_UNIMPLEMENTED_PROMACCESS"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0020_CORE_ACCESS_NOTIN_X_SPACE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0021_CORE_ACCESS_NOTIN_Y_SPACE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0022_CORE_XMODEND_LESS_XMODSRT"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0023_CORE_YMODEND_LESS_YMODSRT"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0024_CORE_BITREV_MOD_IS_ZERO"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0025_CORE_HARD_TRAP" value="report"/>
-        <property key="warningmessagebreakoptions.W0026_CORE_UNIMPLEMENTED_MEMORYACCESS"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0027_CORE_UNIMPLEMENTED_EDSACCESS"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0028_TBLRD_WORM_CONFIG_MEMORY"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0029_TBLRD_DEVICE_ID" value="report"/>
-        <property key="warningmessagebreakoptions.W0030_CORE_UNIMPLEMENTED_MEMORY_ACCESS"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0031_BSLIM_INSUFFICIENT_BOOT_SEGMENT"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0032_BSLIM_LIMITS_EXCEEDS_PROG_MEMORY"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0033_CORE_UNPREDICTABLE_OPCODE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0034_CORE_UNALIGNED_MEMORY_ACCESS"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0035_CORE_UNIMPLEMENTED_RAMACCESS_NOTRAP"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0036_UNIMPLEMENTED_INSTRUCTION"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0040_FPU_DIFF_CP10_CP11"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0041_FPU_ACCESS_DENIED"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0042_FPU_PRIVILEGED_ACCESS_ONLY"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0043_FPU_CP_RESERVED_VALUE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0044_FPU_OUT_OF_RANGE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0051_INSTRUCTION_DIV_NOT_ENOUGH_REPEAT"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0052_INSTRUCTION_DIV_TOO_MANY_REPEAT"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0053_INVALID_INTCON_VS_FIELD_VALUE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0101_SIM_UPDATE_FAILED"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0102_SIM_PERIPH_MISSING"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0103_SIM_PERIPH_FAILED"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0104_SIM_FAILED_TO_INIT_TOOL"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0105_SIM_INVALID_FIELD"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0106_SIM_PERIPH_PARTIAL_SUPPORT"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0107_SIM_NOT_SUPPORTED"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0108_SIM_RESERVED_SETTING"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0109_SIM_PERIPHERAL_IN_DEVELOPMENT"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0110_SIM_UNEXPECTED_EVENT"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0111_SIM_UNSUPPORTED_SELECTION"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0112_SIM_INVALID_OPERATION"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0113_SIM_WRITE_TO_PROTECTED_SFR"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0114_SIM_INVALID_KEY" value="report"/>
-        <property key="warningmessagebreakoptions.W0115_SIM_FAILED_TO_PARSE_DEVICE_FILE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0116_SIM_STACK_OVERFLOW"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0117_SIM_STACK_UNDERFLOW"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0118_SIM_INVALID_FIELD_VALUE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0119_SIM_SAMPLING_RATE_VIOLATION"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0201_ADC_NO_STIMULUS_FILE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0202_ADC_GO_DONE_BIT" value="report"/>
-        <property key="warningmessagebreakoptions.W0203_ADC_MINIMUM_2_TAD"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0204_ADC_TAD_TOO_SMALL"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0205_ADC_UNEXPECTED_TRANSITION"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0206_ADC_SAMP_TIME_TOO_SHORT"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0207_ADC_NO_PINS_SCANNED"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0208_ADC_UNSUPPORTED_CLOCK_SOURCE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0209_ADC_ANALOG_CHANNEL_DIGITAL"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0210_ADC_ANALOG_CHANNEL_OUTPUT"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0211_ADC_PIN_INVALID_CHANNEL"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0212_ADC_BAND_GAP_NOT_SUPPORTED"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0213_ADC_RESERVED_SSRC"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0214_ADC_POSITIVE_INPUT_DIGITAL"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0215_ADC_POSITIVE_INPUT_OUTPUT"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0216_ADC_NEGATIVE_INPUT_DIGITAL"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0217_ADC_NEGATIVE_INPUT_OUTPUT"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0218_ADC_REFERENCE_HIGH_DIGITAL"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0219_ADC_REFERENCE_HIGH_OUTPUT"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0220_ADC_REFERENCE_LOW_DIGITAL"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0221_ADC_REFERENCE_LOW_OUTPUT"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0222_ADC_OVERFLOW" value="report"/>
-        <property key="warningmessagebreakoptions.W0223_ADC_UNDERFLOW" value="report"/>
-        <property key="warningmessagebreakoptions.W0224_ADC_CTMU_NOT_SUPPORTED"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0225_ADC_INVALID_CH0S"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0226_ADC_VBAT_NOT_SUPPORTED"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0227_ADC_INVALID_ADCS"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0228_ADC_INVALID_ADCS"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0229_ADC_INVALID_ADCS"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0230_ADC_TRIGSEL_NOT_SUPPORTED"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0231_ADC_NOT_WARMED" value="report"/>
-        <property key="warningmessagebreakoptions.W0232_ADC_CALIBRATION_ABORTED"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0233_ADC_CORE_POWERED_EARLY"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0234_ADC_ALREADY_CALIBRATING"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0235_ADC_CAL_TYPE_CHANGED"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0236_ADC_CAL_INVALIDATED"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0237_ADC_UNKNOWN_DATASHEET"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0238_ADC_INVALID_SFR_FIELD_VALUE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0239_ADC_UNSUPPORTED_INPUT"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0240_ADC_NOT_CALIBRATED"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0241_ADC_FRACTIONAL_NOT_ALLOWED"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0242_ADC_BG_INT_BEFORE_PWR"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0243_ADC_INVALID_TAD" value="report"/>
-        <property key="warningmessagebreakoptions.W0244_ADC_CONVERSION_ABORTED"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0245_ADC_BUFREGEN_NOT_ALLOWED"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0246_ADC_ACCUMULATION_BAD_RESSEL"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0247_ADC_CONVERSION_BAD_RESSEL"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0300_NVM_WR_BEFORE_KEY_SEQ"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0400_PWM_PWM_FASTER_THAN_FOSC"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0600_WDT_2ND_WDT_MR_WRITE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0601_WDT_EXPIRED" value="report"/>
-        <property key="warningmessagebreakoptions.W0601_WDT_RESET_OUTSIDE_WINDOW"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0700_CLC_GENERAL_WARNING"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0701_CLC_CLCOUT_AS_INPUT"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0702_CLC_CIRCULAR_LOOP"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0800_ACC_INPUT_INVALID_CONFIG"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0801_ACC_INPUT_NOT_SUPPORTED"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0802_ACC_INVERTED_WINDOW_LIMITS"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0803_ACC_MISMATCHED_POS_INPUTS"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0804_ACC_WINDOW_COMP_DISABLED"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0805_ACC_WINDOW_COMPS_MODES"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W0806_ACC_FEATURE_NOT_SUPPORTED"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W10001_RESERVED_IRQ_HANDLER_INVOKED"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W10002_UNSUPPORTED_CLK_SOURCE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W10101_UNSUPPORTED_CHANNEL_MODE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W10102_UNSUPPORTED_CLK_SOURCE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W10103_UNSUPPORTED_RECEIVER_FILTER"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W10301_NO_PORT_PINS_FOUND"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W10500_UNSUPPORTED_SOURCE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W1201_DATAFLASH_MEM_OUTSIDE_RANGE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W1202_DATAFLASH_ERASE_WHILE_LOCKED"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W1203_DATAFLASH_WRITE_WHILE_LOCKED"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W1401_DMA_PERIPH_NOT_AVAIL"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W1402_DMA_INVALID_IRQ" value="report"/>
-        <property key="warningmessagebreakoptions.W1403_DMA_INVALID_SFR" value="report"/>
-        <property key="warningmessagebreakoptions.W1404_DMA_INVALID_DMA_ADDR"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W1405_DMA_IRQ_DIR_MISMATCH"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W1600_PPS_INVALID_MAP" value="report"/>
-        <property key="warningmessagebreakoptions.W1601_PPS_INVALID_PIN_DESCRIPTION"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W1800_PWM_TIMER_SELECTION_NOT_AVIALABLE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W1801_PWM_TIMER_SELECTION_BAD_CLOCK_INPUT"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W1802_PWM_TIMER_MISSING_PERSCALER_INFO"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W2001_INPUTCAPTURE_TMR3_UNAVAILABLE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W2002_INPUTCAPTURE_CAPTURE_EMPTY"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W2003_INPUTCAPTURE_SYNCSEL_NOT_AVIALABLE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W2004_INPUTCAPTURE_BAD_SYNC_SOURCE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W2501_OUTPUTCOMPARE_SYNCSEL_NOT_AVIALABLE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W2502_OUTPUTCOMPARE_BAD_SYNC_SOURCE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W2503_OUTPUTCOMPARE_BAD_TRIGGER_SOURCE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W2700_MPU_ILLEGAL_DREGION"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W2701_MPU_INVALID_REGION"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W3000_LPM_READ_PROTECTION_SECTION"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W3010_SPM_WRITE_PROTECTION_SECTION"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W6001_RTT_FORBIDDEN_RTPRES"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W6002_RTT_BAD_WRITING_ALMV"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W6003_RTT_BAD_WRITING_RTPRES"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W7001_SMT_CLK_SELECTION_NOT_SUPPORT"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W7002_SMT_SIG_SELECTION_NOT_SUPPORT"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W7003_SMT_WIN_SELECTION_NOT_SUPPORT"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W8001_OSC_INVALID_CLOCK_SOURCE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W8002_OSC_RESERVED_FEXTOSC"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W9001_TMR_GATE_AND_EXTCLOCK_ENABLED"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W9002_TMR_NO_PIN_AVAILABLE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W9003_TMR_INVALID_CLOCK_SOURCE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W9201_UART_TX_OVERFLOW"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W9202_UART_TX_CAPTUREFILE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W9203_UART_TX_INVALIDINTERRUPTMODE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W9204_UART_RX_EMPTY_QUEUE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W9205_UART_TX_BADFILE" value="report"/>
-        <property key="warningmessagebreakoptions.W9206_UART_RESERVED_MODE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W9207_UART_UNABLETOCLOSE_FILE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W9401_CVREF_INVALIDSOURCESELECTION"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W9402_CVREF_INPUT_OUTPUTPINCONFLICT"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W9601_COMP_FVR_SOURCE_UNAVAILABLE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W9602_COMP_DAC_SOURCE_UNAVAILABLE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W9603_COMP_CVREF_SOURCE_UNAVAILABLE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W9604_COMP_SLOPE_SOURCE_UNAVAILABLE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W9605_COMP_PRG_SOURCE_UNAVAILABLE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W9607_COMP_DGTL_FLTR_OPTION_UNAVAILABLE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W9609_COMP_DGTL_FLTR_CLK_UNAVAILABLE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W9801_FVR_INVALID_MODE_SELECTION"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W9801_SCL_BAD_SUBTYPE_INDICATION"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W9802_SCL_FILE_NOT_FOUND"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W9803_SCL_FAILED_TO_READ_FILE"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W9804_SCL_UNRECOGNIZED_LABEL"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W9805_SCL_UNRECOGNIZED_VAR"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W9901_RTSP_INVALID_OPERATION_SELECTION"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.W9902_RTSP_FLASH_PROGRAM_WRITE_PROTECTED"
-                  value="report"/>
-        <property key="warningmessagebreakoptions.displaywarningmessagesoption"
-                  value=""/>
-        <property key="warningmessagebreakoptions.warningmessages" value="holdstate"/>
-        <property key="冻结所有其他外设" value="true"/>
-        <property key="安全段。分部编程" value="FullChipProgramming"/>
-      </Tool>
-    </conf>
-  </confs>
-</configurationDescriptor>

WZYX_UART_V1.1250726.X/WZYX_UART_V1.1250726.X/nbproject/private/configurations.xml

@@ -1,25 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<configurationDescriptor version="65">
-  <projectmakefile>Makefile</projectmakefile>
-  <defaultConf>0</defaultConf>
-  <confs>
-    <conf name="default" type="2">
-      <platformToolSN>:=MPLABComm-USB-Microchip:=&lt;vid>04D8:=&lt;pid>900A:=&lt;rev>0002:=&lt;man>Microchip Technology Inc.:=&lt;prod>PICkit 3:=&lt;sn>DEFAULT_PK3 :=&lt;drv>x:=&lt;xpt>h:=end</platformToolSN>
-      <languageToolchainDir>C:\Program Files\Microchip\xc16\v2.10\bin</languageToolchainDir>
-      <mdbdebugger version="1">
-        <placeholder1>place holder 1</placeholder1>
-        <placeholder2>place holder 2</placeholder2>
-      </mdbdebugger>
-      <runprofile version="6">
-        <args></args>
-        <rundir></rundir>
-        <buildfirst>true</buildfirst>
-        <console-type>0</console-type>
-        <terminal-type>0</terminal-type>
-        <remove-instrumentation>0</remove-instrumentation>
-        <environment>
-        </environment>
-      </runprofile>
-    </conf>
-  </confs>
-</configurationDescriptor>

WZYX_UART_V1.1250726.X/WZYX_UART_V1.1250726.X/nbproject/private/private.xml

@@ -1,15 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<project-private xmlns="http://www.netbeans.org/ns/project-private/1">
-    <editor-bookmarks xmlns="http://www.netbeans.org/ns/editor-bookmarks/2" lastBookmarkId="0"/>
-    <open-files xmlns="http://www.netbeans.org/ns/projectui-open-files/2">
-        <group>
-            <file>file:/E:/30.%20BTD24018-WZYXPOCT/01.Code/current/UART.X%20(2)/WZYX_UART_V1.1250612.X/main.c</file>
-            <file>file:/E:/30.%20BTD24018-WZYXPOCT/01.Code/current/UART.X%20(2)/WZYX_UART_V1.1250612.X/Uart.c</file>
-            <file>file:/E:/30.%20BTD24018-WZYXPOCT/01.Code/current/UART.X%20(2)/WZYX_UART_V1.1250612.X/Pin.c</file>
-            <file>file:/E:/30.%20BTD24018-WZYXPOCT/01.Code/current/UART.X%20(2)/WZYX_UART_V1.1250612.X/Uart.h</file>
-        </group>
-        <group name="source">
-            <file>file:/F:/library/source/WZYX_UART_V1.1250726.X/WZYX_UART_V1.1250726.X/Pin.c</file>
-        </group>
-    </open-files>
-</project-private>

WZYX_UART_V1.1250726.X/WZYX_UART_V1.1250726.X/nbproject/project.xml

@@ -1,30 +0,0 @@
-<?xml version="1.0" encoding="UTF-8"?>
-<project xmlns="http://www.netbeans.org/ns/project/1">
-    <type>com.microchip.mplab.nbide.embedded.makeproject</type>
-    <configuration>
-        <data xmlns="http://www.netbeans.org/ns/make-project/1">
-            <name>WZYX_UART_V1.1250726</name>
-            <creation-uuid>2d5cad0a-a674-4c9f-9916-b3f885c93731</creation-uuid>
-            <make-project-type>0</make-project-type>
-            <sourceEncoding>GB2312</sourceEncoding>
-            <c-extensions>c</c-extensions>
-            <cpp-extensions/>
-            <header-extensions>h</header-extensions>
-            <asminc-extensions/>
-            <make-dep-projects/>
-            <sourceRootList>
-                <sourceRootElem>.</sourceRootElem>
-                <sourceRootElem>../../../../../11. N8/01.Code/current/N8_PCR_N1.20230213/NQ8QPCR_NO2.20230823.X/file</sourceRootElem>
-            </sourceRootList>
-            <confList>
-                <confElem>
-                    <name>default</name>
-                    <type>2</type>
-                </confElem>
-            </confList>
-            <formatting>
-                <project-formatting-style>false</project-formatting-style>
-            </formatting>
-        </data>
-    </configuration>
-</project>